Award Data

Industrial facilities, manufacturing plants, and electric power plants that burn fossil fuels exhaust the combustion products to atmosphere through their smokestacks. Stack pollutant emissions are quantified using manual testing methods developed in the 1960s, which are prone to error if non-axial flow exists in a stack.Recently, NIST has been working on an improved technique of performing 3D flow ...

Phase I has proven that the current setup achieves better than 8mm spatial resolution for 2.2MeV prompt gammas. However, 1mm spatial resolution presents a significant challenge for the current setup due in part to limited timing resolution and count rate. A new analog ASIC will be developed to replace the current analog ASIC that will have better timing resolution and deliver higher count rates. I ...

To evaluate the technical feasibility of prompt gamma neutron activation (PGAA) as an alternative to a set of standard destructive tests of concrete petrography including aggregate type, water/cement ratio, aggregate/binder ratio, density, chloride content and chloride bulk diffusion constant; and to determine the specifications for the design of a dedicated commercial laboratory-based PGAA facili ...

The Bottom Feeder project is designed to prove out the research done in Phase I using a prototype platform. The prototype will be a full size version of the platform designed during Phase I. The Phase I platform was designed to work in two operational configurations, a highly efficient mode and a highly maneuverable mode, with the ability to switch between them while submerged. The platform is equ ...

DHS is preserving the safety and the security of America by preventing, foiling, and defeating attacks from a variety of adversaries. The increasing threats (both in terms of numbers and in terms of abilities) must be addressed successfully while facing an austere budget environment. In order to be able to "do more with less" having a capability for optimizing the resources and the assets which ar ...

To satisfy the need for a radiation-hardened, 1064-nm laser sensitive, single-photon sensitive ladar camera, with pixel counts of 128 x 128 or more, a proven single-photon linear-mode InGaAs(P)/InAlAs avalanche-photodiode (APD) detector will be integrated with low-noise ladar readout integrated circuits (ROICs), and its performance will be shown compatible with missile defense mission requirements ...

The Missile Defense Agency (MDA) is in need of an innovative air launch pallet aimed at decreasing launch cost per mission and improving capability to accommodate various shape and size airdropped vehicle configurations. By developing a recoverable and reusable platform, MDA’s airdrop programs become more economically viable and environmentally friendly. To achieve MDA’s goals and still meet p ...

This proposed SBIR Phase II effort continues the development of rugged MEMS inertial measurement units (IMUs) for operation in high shock and vibration operation environment of missiles, and other military and commercial platforms with harsh environment characteristics. The primary outcome of the proposed effort is a 6-axis highly-reliable and durable tactical-grade MEMS IMU with inclusion of vibr ...

Biotechnology, aerospace, automotive and communications industries need small ultra-precise, three dimensional parts for component miniaturization. Present metal cutting technology is rapidly reaching its limits. A new technology is required to accelerate this trend. Atometric will pursue innovations in ultra-precision multi-axis machine tools. The machining capacity will be within a cube of 50 mm ...

We believe we have an innovative method for discriminating between real incoming missiles and decoys in a cluttered environment. We have developed a method for taking continuous position information and, using a physical model based on Newton's Laws of Motion and advanced mathematics developed in the field of modern control theory, we have developed algorithms and systems for discriminating betwe ...