Award Data

Our approach utilizes a mature, portable inflatable beam shelter to house modified commercial car wash equipment operated by an automated control system. The inflatable beam shelters are currently deployed with the US Military and are commonly used as decontamination shelters for military vehicles. The commercial wash equipment is modified to withstand the caustic chemical environment necessar ...

The Phase I project seeks to develop a design basis for a firearm testing device which will provide a "virtual shooter" for the operation and measurement of handgun and ammunition performance. The reactions of real human shooters will be measured as a function of the specific firing action results of the test weapon on the human physiology. A six degree-of-freedom (6DOF) model will be developed ...

This Phase I proposal describes the development of an Automatic Threat Recognition (ATR) algorithm for volumetric CT data. Our ATR algorithm consists of four stages: (1) preprocessing of CT data, (2) object segmentation of preprocessed CT data, (3) post-processing of segmentation results, and (4) explosive detection from the segmented objects. The ATR algorithm will be made computationally efficie ...

This Phase I proposal describes (1) an automated image quality assessment (IQA) software to objectively quantify image quality of airport security X-ray imaging systems for both checked and carry-on baggage and (2) a design for a novel test phantom specialized for security CT scanners. For fixed images, automated algorithms will measure the Modulation Transfer Function (MTF) and Contrast-to-Noise ...

Kappler proposes to develop a novel fabric composite that when constructed into Personal Protective Equipment (PPE) garments, provides protection to the wearer from multiple threats. The proposed research set forth by Kappler, Inc. is innovative in that it augments current Kappler base fabrics that protect from chemical, biologic, and flame hazards, but will now include protection from ballistic ...

Sepax Technologies, Inc. has identified a new type of anoin-exchange resin which separates single-wall carbon nanotubes (SWCNTs) with >80% recovery yield and resolves in a single pass the chiral tubes of (6,5) well from commercial SWCNT starting materials by Chromatography. Improvement and scale up of the targeted resin production will facilitate the separation of chiral nanotubes for the academic ...

Current bioaerosol monitoring strategies rely on inertia-based sampling and suffer from high power consumption and low efficiency limitations. In contrast, our overall objective is to design and demonstrate a novel electrostatic sampler that provides dramatic improvements including low power requirement (90% for 1-10mm), high viability (>80%), scalability for varying threat scenarios, low noise, a ...

The worldwide ocean going freight transportation infrastructure, known as the Marine Transportation System (¿MTS¿) is the cornerstone of the global economic well-being. Approximately ninety percent of all cargo moves via the MTS. However, one need only look to the open movement of containerized cargo to find simple, effective, and efficient means of large-scale economic damage. The result is a c ...

Special Operation Forces personnel require a rugged, miniature receiver that is capable of monitoring RF energy while deployed on a mission. The RF receiver will give a better picture of the electromagnetic threat environment enabling a heightened situational awareness, yet the device must be small enough that it does not hamper the SOF warfighter during missions requiring stealth and rapid mobil ...

This project is designed to test a novel receptor scaffold/sensor combination for the selective and direct measurement of antigens and to compare direct electric detection of antigens against the corresponding antibody based ELISA method. The scaffold concept combines a robust nucleic acid receptor (aptamer) coupled to a low cost CMOS FET and AlGaN MODFET transducer. Aptamers are short nucleic aci ...