Award Data

Animal-borne electronic instruments (tags) are critical tools for monitoring the behavior and ecology of cetaceans, providing data needed for managing their populations and mitigating the threats they face. Although remote-deployment of tags onto cetaceans that cannot be captured has provided valuable data, attachment durations have been frustratingly short and variable. Our Phase II goal is to de ...

The Bottom Feeder project is designed to prove out the research done in Phase I using a prototype platform. The prototype will be a full size version of the platform designed during Phase I. The Phase I platform was designed to work in two operational configurations, a highly efficient mode and a highly maneuverable mode, with the ability to switch between them while submerged. The platform is equ ...

Special Operation Forces personnel require a rugged, miniature receiver that is capable of monitoring RF energy while deployed on a mission. The RF receiver will give a better picture of the electromagnetic threat environment enabling a heightened situational awareness, yet the device must be small enough that it does not hamper the SOF warfighter during missions requiring stealth and rapid mobil ...

B.E. Meyers & Company proposes to deliver the Phase I requirements of the AVPAS by utilizing its research and development resources to examine new technologies, architectures, and designs. These efforts will result in providing to the government the market research, proof-of-concept analysis, and a proposed design for an AVPAS prototype. The prototype design will be founded on incremental testin ...

A novel method is presented to produce very low cost Basic B AIS transponders. The result will be a very small, minimal cost product with a maximum of functionsality that can be easily installed in a few minutes. Because of its very low power consumption, it is also suitable for handheld, portable and solar powered use.

NIST is using a sensitive optical technique called cavity ring-down detection to permit detection of impurities in semiconductor process gases, which cause substantial losses in manufacturing yield. In order to increase the sensitivity and range of application of this technique, improved single frequency laser sources are required. In particular, lasers providing more power, narrower line-width, b ...

The proposed project will develop a novel aerosol concentrator based on aerodynamic lens technology capable of achieving very high concentration factors in a compact device. This device will be fabricated in silicon using micro-fabrication methods resulting in low cost, compact size, high reliability, high throughput, and extremely high precision and repeatability. In this project we will develop ...

InnovaTek proposes to develop an advanced, low cost aerosol collector/concentrator that utilizes electrostatic precipitation and cyclonic impingement with a virtual impactor pre-concentrator that will have >90% collection efficiency while operating at 1000 LPM using less than 50 watts of power. Technology will be designed on the basis of first principles and computational fluid dynamics modeling. ...

This proposal addresses the development of an advanced polymer-based system which possesses a reactive feature that serves to neutralize chemical agents and toxic industrial chemicals in-situ and on contact. The polymer system is designed to facilitate a rapid return-to-service of the contaminated area, such that emergency, rescue and other first response activities can take place safely during th ...

Many integrated biodetection systems require an aqueous sample, with the notable exception being those based on mass spectrometry which frequently uses a dry sample (MALDI or pyrolysis). The two proposed air sampling technologies to be developed are amenable to dry or nearly dry sample collection, but yet both can deliver a final sample in an aqueous format autonomously. Furthermore, both offer si ...