Award Data

This Small Business Innovation Research Phase I research project aims to establish "proof-of-concept" of a novel Software Platform directed at needs of FDA's Process Analytical Technologies (PAT) initiative, a framework for innovative pharmaceutical development, manufacturing and quality assurance. PAT is implemented at three levels: Process Understanding; Quality by Design; and Monitor, Predict a ...

A longwire antenna module is proposed, incorporating a length reduction technique that yields 25-75% length reduction with minimal impact on gain. A resonant monopole antenna operating at 535kHz is approximately 440ft long; length reduction techniques will reduce this to between 69ft and 134ft depending upon the desired gain. A shorter/lighter longwire antenna will allow the aircraft to be more ...

An antenna system is proposed for the purpose of FM, TV-VHF, and TV-UHF PSYPOS broadcast applications. The antenna system incorporates a radiating structure that is small, light weight, and conformal. A circularly polarized beam is broadcast from an aircraft towards nadir, illuminating the region below the craft with a horizontally-polarized signal, yielding polarizations pointing in both the No ...

This Small Business Innovation Research (SBIR)Phase I research project will investigate technology innovations needed to support the automated analysis and improvement of the reusability characteristics of digital learning resources. Reusability of digital learning resources is crucial to increasing access and lowering the cost of online training and education. Recent advances in the theory of reu ...

This Small Business Technology Transfer Phase I project proposes the joint development of a compact/portable laser spectroscopic trace gas sensor based on quartz-enhanced photo-acoustic spectroscopy (QEPAS) recently demonstrated in the lab. QEPAS uses a low cost quartz tuning fork as the sensing element and provides immunity to environmental acoustic noise and enables the use of very small gas cel ...

This Small Business Technology Transfer (STTR) Phase I research project proposes to develop new methods for blue/UV laser fabrication. These new devices will have the competitive advantages of higher emission intensities, higher reliability, and ability to extend emission into the deep UV spectral range. Fabricated devices will consist of cleaved AlGaN epitaxial layer structures on the tips of cop ...

High quantum efficiency (QE), fast (

This Small Business Innovation Research (SBIR) Phase I project will develop high thermoelectric figure-of-merit (ZT) nanocrystal quantum dot (NQD) thermoelectric (TE) materials that have thermal efficiency properties far better than traditional bulk thermoelectric materials. In the proposed work, TE devices will be fabricated from solidified quantum dot films that are formed from colloidally synth ...

This Small Business Innovation Research (SBIR) Phase I project will develop a new passivation technique, derived from a recent discovery that semiconductors can be readily hydrogenated by simultaneous exposure to hydrogen gas and ultra-violet light. The technique has a number of advantages over conventional glow discharge hydrogenation, is immediately applicable to processes requiring selective a ...