You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY24 is not expected to be complete until March, 2025.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.

  1. A Multimedia Surveillance Networking System using Foveation Technology

    SBC: High Assurance Systems, In.            Topic: N/A

    The proposed foveation-based video and infra-red broad-spectrum streaming technology will provide a novel all-time all-weather surveillance capability. This highly scalable technology will allow low cost object tracking and searching capabilities in compressed domain. The technology will be deployable over IP and wireless networks allowing wide coverage based on broad spectrum sensors.

    SBIR Phase I 2006 Department of Homeland Security
  2. Construction of a Force Probe for Characterization of Microscale Features

    SBC: INSITUTEC, INC.            Topic: N/A

    The Phase 2 objective is to provide NIST with a modular gauge head unit equipped with InsituTec's standing wave probe technology. The complete gauge head unit will be retrofitted to the NIST M48 which is one of the most precise measuring machines in the world. This unit will enable NIST to achieve the agency's program goal in dimensional metrology which is to provide microscale measurement capacit ...

    SBIR Phase II 2006 Department of CommerceNational Institute of Standards and Technology
  3. Rotary-Wing UAV as On-Demand Sensor Platform for Aircraft Operators

    SBC: Lite Machines Corporation            Topic: SOCOM05011

    During warfare, strikes made with surgical precision by Special Operations Forces reduce collateral damage and loss of life among non-combatants and have become the expectation of our war-fighters. Such strikes, however, require the ability to survey the target area in a timely fashion and guide munitions accurately. High altitude photographs taken by satellites and orbiting aircraft often lack ...

    SBIR Phase I 2006 Department of DefenseSpecial Operations Command
  4. Enhanced Visual Obscurant and Rapid Dispersal System

    SBC: RADIATION EFFECTS RESEARCH ASSOCIATES, INC            Topic: SOCOM06007

    The objective of this proposal is to design and develop an innovative smoke/obscurant system that can be used to provide smoke from either an individual deployment, hand-held 40mm or 60mm grenade, or a vehicle mounted area grenade projector that uses the same grenade and will provide sufficient obscurant protection to conceal a team or vehicles.This SBIR requests that a single smoke/obscurant gren ...

    SBIR Phase I 2006 Department of DefenseSpecial Operations Command
  5. Electrostatic Precipitation for High Efficient Aerosol Collection into Low Analysis Volumes

    SBC: Evogen, Inc.            Topic: N/A

    New sampling methods are now available and offer greater sample collection efficiency, smaller sample volumes and significantly reduced power consumption in a much more compact design. Technologies such as electrostatic precipitation (EP) have demonstrated over 90% collection efficiency for particles in the 1 to 10 micron size range. EP collectors can be made very small and compact and require les ...

    SBIR Phase I 2006 Department of Homeland Security
  6. High Quantum Efficiency Fast Detectors for Readout of Scintillators for Gamma Ray Detection

    SBC: VOXTEL, INC.            Topic: HSB062007

    High quantum efficiency (QE), fast (

    SBIR Phase I 2006 Department of Homeland Security
  7. Tool Condition Monitoring and Diagnostics

    SBC: VulcanCraft            Topic: N/A

    A smart machine tool must be able to monitor its condition and report problems. Every CNC machine should provide an alarm for tool condition problems, including tool wear, much as every automobile has a low oil indicator. Tool wear is particularly important for unattended machining as a worn tool can ruin a part. All current tool condition systems operate "blind" without direct information on curr ...

    SBIR Phase I 2003 Department of CommerceNational Institute of Standards and Technology
US Flag An Official Website of the United States Government