Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY19 is not expected to be complete until June, 2020.

  1. Instantaneous Remote Sensing Data Receiving and Processing for Emergency Response

    SBC: EarthData International, Inc.            Topic: N/A

    EarthData proposes an innovative approach to providing real-time surveillance imagery and greatly improving response times for tasking multiple remote sensing aircraft to acquire critical map-based products required for crisis support. A mobile ground based acquisition planner inputs the acquisition needs into a GIS system preloaded with basic (pre disaster) information of the response area. Using ...

    SBIR Phase I 2006 Department of Homeland Security
  2. Enterprise Botnet Detection System

    SBC: HBGary, Inc.            Topic: HSB061008

    A botnet is a network of robots or ¿bots¿ installed surreptitiously on computer hosts and controller to do the attacker¿s bidding via remote command and control systems. Most bots employ stealth methods to hide communications and bot installation. Detecting a botnet by examining network traffic is extremely difficult since botnets frequently mask their existence by using multiple host proxies a ...

    SBIR Phase I 2006 Department of Homeland Security
  3. Electrostatic Precipitation for High Efficient Aerosol Collection into Low Analysis Volumes

    SBC: Sceptor Industries, Inc.            Topic: N/A

    New sampling methods are now available and offer greater sample collection efficiency, smaller sample volumes and significantly reduced power consumption in a much more compact design. Technologies such as electrostatic precipitation (EP) have demonstrated over 90% collection efficiency for particles in the 1 to 10 micron size range. EP collectors can be made very small and compact and require les ...

    SBIR Phase I 2006 Department of Homeland Security
  4. High Quantum Efficiency Fast Detectors for Readout of Scintillators for Gamma Ray Detection

    SBC: VOXTEL, INC.            Topic: HSB062007

    High quantum efficiency (QE), fast (

    SBIR Phase I 2006 Department of Homeland Security
  5. Construction of a Force Probe for Characterization of Microscale Features

    SBC: INSITUTEC, INC.            Topic: N/A

    The Phase 2 objective is to provide NIST with a modular gauge head unit equipped with InsituTec's standing wave probe technology. The complete gauge head unit will be retrofitted to the NIST M48 which is one of the most precise measuring machines in the world. This unit will enable NIST to achieve the agency's program goal in dimensional metrology which is to provide microscale measurement capacit ...

    SBIR Phase II 2006 Department of CommerceNational Institute of Standards and Technology
  6. NANOFIBER NONWOVEN BASED AIRCREW PERSONNEL LOWERING DEVICE

    SBC: 3F, LLC            Topic: AF06020

    Nanofiber nonwoven spunbonded materials technology is adapted for use in a personnel lowering device. The resulting device will be simple, easy to use, and relatively low cost.

    SBIR Phase I 2006 Department of DefenseAir Force
  7. Single ply 3Dwoven Functionally Gradient Multi-Fiber / Multi-Matrix Composites with Thermal Management Systems

    SBC: 3TEX, Inc.            Topic: AF04249

    In composites, not only can properties vary with load direction, fiber based composites also offer the unique ability to tailor material properties locally. Localized matrix or fiber architecture changes can meet local mechanical, electrical, or thermal loads within a component or vehicle, without weight penalty or resort to additional external structures. In Phase I, the team used 3TEX 3-D wea ...

    SBIR Phase II 2006 Department of DefenseAir Force
  8. Novel Structural Joining Concepts Using 3-D Textile Preforms and Composites

    SBC: 3TEX, Inc.            Topic: AF05248

    Strength and durability of commonly used bonded and bolted composite-to-composite and composite-to-metal structural joints suffer from sharp geometry variations, mismatch of elastic moduli, Poisson’s ratios, coefficients of thermal expansion and thermal conductivity of the adherends, altogether causing high stress concentration and premature joint failure. The proposed work is focused on develop ...

    SBIR Phase II 2006 Department of DefenseAir Force
  9. Corrosion Modeling and Life Prediction Supporting Structural Prognostic Health Management

    SBC: APES INC.            Topic: AF06091

    This proposal offers an approach to integrate the latest corrosion sensor technology with corrosion structural effects modeling to enable the transition from periodic corrosion inspections to an efficient, focused prognostics and health monitoring (PHM) system. The fundamental vision of the proposed program is to provide the customer with a process suitable for integrating corrosion effects analy ...

    SBIR Phase I 2006 Department of DefenseAir Force
  10. Automated Assistance with Ontology Generation (A2OG) for PBA/IPB

    SBC: ARGTEC, INC.            Topic: AF05098

    ARGTEC is pioneering the use of a new and innovative technology based on the theory of Attributed Relational Graph (ARG) in several application domains for content-based indexing and retrieval in large multimedia databases. We have achieved several breakthroughs in the development of this technology. This technology has been very successful in Automated Fingerprint Identification Systems (AFIS) an ...

    SBIR Phase II 2006 Department of DefenseAir Force
US Flag An Official Website of the United States Government