You are here
Award Data
The Award database is continually updated throughout the year. As a result, data for FY24 is not expected to be complete until March, 2025.
Download all SBIR.gov award data either with award abstracts (290MB)
or without award abstracts (65MB).
A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.
The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.
-
Sub-topic 1. NAND/NOR Chip Forensics- Phase II
SBC: Viaforensics, LLC Topic: HSB0112003The overall goal of this project is to develop new tools and techniques to address current limitations in mobile forensics. Many factors, including NAND Flash memory, passcode protected phones, encrypted data, lack of device support and simplistic analysis techniques in current forensic tools drive the need for advancements in mobile forensic tools. Phase I of this project was highly successful ...
SBIR Phase II 2012 Department of Homeland Security -
Anion Exchange Resin for Chirality-based Separation of Single-wall Carbon Nanotubes
SBC: Sepax Technologies, Inc. Topic: N/ASepax Technologies, Inc. has identified a new type of anoin-exchange resin which separates single-wall carbon nanotubes (SWCNTs) with >80% recovery yield and resolves in a single pass the chiral tubes of (6,5) well from commercial SWCNT starting materials by Chromatography. Improvement and scale up of the targeted resin production will facilitate the separation of chiral nanotubes for the academic ...
SBIR Phase II 2012 Department of CommerceNational Institute of Standards and Technology -
Low Cost Stabilized Laser Diode System
SBC: Ceebco, LLC Topic: N/AThis Phase 1 SBIR project aims to develop a frequency stabilized laser diode system suitable for application in optical metrology and in displacement measurement. The compact design of the semiconductor laser lends itself to many applications where a coherent light source is required, but space is at a premium. Some fields, such as precision optical metrology require a coherent light source whose ...
SBIR Phase I 2012 Department of CommerceNational Institute of Standards and Technology -
Query- Based Interoperability and CAD/CAE Integration in Assemblies
SBC: INTACT SOLUTIONS, INC Topic: N/AWe propose to design and implement a set of CAD queries by which to achieve model interchangeability in assemblies, model interoperability, and model integration for CAD/CAE. A model scenario will be used to illustrate how this can be accomplished. In Phase 1, we will establish the feasibility of the approach, develop high level algorithms and conduct software experiments to verify their efficienc ...
SBIR Phase I 2012 Department of CommerceNational Institute of Standards and Technology -
Unipolar nBn HgCdTe on Silicon for High Performance, Low Cost NIR/SWIR Imagers
SBC: EPIR TECHNOLOGIES INC Topic: SOCOM12002We propose the development of a near infrared/shortwave infrared (NIR/SWIR) sensor based on mercury cadmium telluride (HgCdTe) in an n-type/barrier/n-type (nBn) architecture, designed for room-temperature operation in the 0.7 to 2.8µm NIR/SWIR spectral range. The sensor will compete as a low cost/high performance alternative to near infrared indium gallium arsenide (InGaAs)-based cameras by prov ...
SBIR Phase I 2012 Department of DefenseSpecial Operations Command -
StopBot
SBC: CYBER DEFENSE AGENCY, LLC Topic: N/ACyber Defense Agency, LLC (CDA) proposes to develop StopBot, a unique, multi-modal security application that will detect botnets and disable their command and control systems. StopBot will have three different modes of operation: a free, stand-alone mode to protect individual end systems, a subscription mode in which results from individual end systems are collected securely and correlated to gene ...
SBIR Phase I 2006 Department of Homeland Security -
Design and Realization of a Dual Function OCM/MPM for Imaging TEMPs
SBC: DISTANT FOCUS CORP Topic: N/ARegenerative medicine is an emerging, interdisciplinary field that will result in new engineered medical products. The introduction of a high-resolution, non-destructive imaging technique that is capable of penetrating deeply into the highly-scattering scaffold medium has the means to accelerate the development and commercial utilization of these novel materials. Multi-photon microscopy (MPM) is b ...
SBIR Phase II 2006 Department of CommerceNational Institute of Standards and Technology -
Construction of a Force Probe for Characterization of Microscale Features
SBC: INSITUTEC, INC. Topic: N/AThe Phase 2 objective is to provide NIST with a modular gauge head unit equipped with InsituTec's standing wave probe technology. The complete gauge head unit will be retrofitted to the NIST M48 which is one of the most precise measuring machines in the world. This unit will enable NIST to achieve the agency's program goal in dimensional metrology which is to provide microscale measurement capacit ...
SBIR Phase II 2006 Department of CommerceNational Institute of Standards and Technology -
High Quantum Efficiency Fast Detectors for Readout of Scintillators for Gamma Ray Detection
SBC: VOXTEL, INC. Topic: HSB062007High quantum efficiency (QE), fast (
SBIR Phase I 2006 Department of Homeland Security -
Composite Stuff-Proof Windshield and Lightweight Pilothouse Assembly
SBC: PACKER TECHNOLOGIES INTERNATIONAL (FORME Topic: N/AThe Phase II effort builds on Phase I. Phase II starts with an integrated product and process design and engineering analysis of the baseline structure described in the Phase I report and variants that may reduce cost and risk. The emphasis is on use ofnonlinear FEA with continuum analysis to handle stiffeners, window frames, and connectors. After review and approval by SOCOM, the design is fab ...
SBIR Phase II 2003 Department of DefenseSpecial Operations Command