You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY24 is not expected to be complete until March, 2025.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.

  1. Innovative Approaches to the Fabrication of Composite Rotary Wing Main Rotor Blade Spars with Option

    SBC: ACCUDYNE SYSTEMS, INC.            Topic: N08026

    Sponsored by NAVAIR, Accudyne Systems completed a Phase 1 SBIR program, developing an equipment and process concept for cost-effective fabrication of composite rotary wing main rotor blade spars. The CH-53K spar was the study focus. The recommended work cell concept combines automated tape placement, woven fabric placement, and pick and place of 45° parallelograms to layup plies, then debulk and ...

    SBIR Phase II 2010 Department of DefenseNavy
  2. Shipboard Waste Volume Reduction and Treatment

    SBC: Adherent Technologies, Inc.            Topic: N092153

    The US Navy is seeking ways to treat typical ship-generated waste to minimize storage space required for waste storage during long-term deployments, with a special emphasis on the large items produced during cargo and ordinance handling. The best way to do this is to treat the waste as a resource, reducing its volume and producing useful energy or fuel from the waste decomposition process. Rather ...

    SBIR Phase I 2010 Department of DefenseNavy
  3. A Novel Noninvasive Microwave Sensor for Quantitative Assessment of Degree of Sensitization in Marine Aluminum Alloys

    SBC: ALPHASENSE, INC.            Topic: N09T022

    In phase I, we have proven the feasibility of using the microwave cavity perturbation technique to detect and quantify DoS in marine aluminum alloys. We implemented an alpha version sensor prototype, characterized and validated its performance using ASTM G67 method. We also identified methods to further enhance the sensor sensitivity, so that DoS in the low (a few mg/cm2) to moderate range can be ...

    STTR Phase II 2010 Department of DefenseNavy
  4. A Compact, Low Cost, Handheld Sensor for Non- Destructive Material Case Depth Verification

    SBC: ALPHASENSE, INC.            Topic: N102141

    In this proposal, AlphaSense, Inc. and the Center for Non-destructive Evaluations at Iowa State University detail the development of a compact, low cost handheld sensor for non-destructive material case depth verification. The key innovations of this proposal include the following: a) case depth evaluations based on electromagnetic property measurements, b) a model based alternating current potent ...

    SBIR Phase I 2010 Department of DefenseNavy
  5. Compact, Low Cost, MEMS Hotplate Sensors for Battery Offgassing Analysis

    SBC: ALPHASENSE, INC.            Topic: N101056

    In this proposal, Alphasense Inc. and the Institute for MEMS and VLSI technologies at the George Washington University detail the development of compact, low cost MEMS microhotplate sensors for battery offgassing analysis. Key innovations of the proposed sensor include: a) the application of metal oxide coated microhotplates to ensure high sensitivity and stability, b) the application of a bi-laye ...

    SBIR Phase I 2010 Department of DefenseNavy
  6. Integrated Chip Optical CDMA for Transport Layer Security

    SBC: EM PHOTONICS INC            Topic: N102123

    Optical CDMA is most suitable to be applied to high speed LAN to achieve contention-free, zero delay access, where traffic tends to be bursty rather than continuous. Channel assignment is much easier with CDMA. CDMA isolates irregular channels so that they do not influence other channels, CDMA can be efficiently used in conjunction with TDMA and WDMA on multimedia communication networks where mult ...

    SBIR Phase I 2010 Department of DefenseNavy
  7. Enhanced Realtime Millimeter Wave Imaging Using Hardware Acceleration- CPP

    SBC: EM PHOTONICS INC            Topic: N06079

    The ultimate goal of this Commercialization Pilot Program (CPP) effort is to design, build, and integrate flight-ready custom electronics for a 220-channel MMW distributed-aperture imager. This work bases on a previous SBIR project, in which we constructed a single-channel prototype of the phase control electronics in a laboratory (breadboard) environment. To enable control of a 220-channel system ...

    SBIR Phase II 2010 Department of DefenseNavy
  8. Lossless Non-Blocking Single-Mode Fiber Optic Wavelength Router

    SBC: EM PHOTONICS INC            Topic: N101030

    In this Phase I SBIR effort we will investigate the feasibility of design and optimization of an optically interconnected optical router using a photonic crystal-based switching fabric and by carefully engineering the spatial and temporal properties of such periodic structures. We will take multiple design parameters into account to optimize the optical backplane to account for variations in opera ...

    SBIR Phase I 2010 Department of DefenseNavy
  9. Hemostatic Agent Development

    SBC: HemCon Medical Technologies Inc            Topic: N101085

    We will develop a novel hemostatic, antimicrobial, resorbable, nanofiber dressing utilizing proven hemorrhage control technology in combination with novel advanced technologies. The nanofiber dressing will be prepared using scaleable Nanospider™ electrospinning technology. Nanofiber Based Dressing Constructs (NBDCs) can be prepared to have physical and chemical attributes that closely resemble n ...

    SBIR Phase I 2010 Department of DefenseNavy
  10. Digital Data Recorder for Gauges in High Speed Weapons During Survivability Testing

    SBC: DYNAMIC SYSTEMS & RESEARCH CORP            Topic: DTRA092014

    This program seeks to develop and demonstrate, in severe mechanical shock environments, a new state-of-the-art data recorder for environmental measurements of warhead systems. The developed DSR data record will include 4 internal channels for measuring acceleration, weapon case strain, or pressure and 6 external input digital channels for other user defined measurements. High sampling rates will ...

    SBIR Phase I 2010 Department of DefenseDefense Threat Reduction Agency
US Flag An Official Website of the United States Government