You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY24 is not expected to be complete until March, 2025.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.

  1. Peracetic Acid Based Disinfectants for PPEs

    SBC: VURONYX TECHNOLOGIES LLC            Topic: 2

    In this Phase 1 SBIR proposal, Vuronyx Technologies proposes to develop acetylperoxyborate (APB) powders for disinfection of Personal Protective Equipments (PPEs) so that they can be reused. APB powders are stable, active-oxygen containing compounds that release peracetic acid upon dissolution in water. As explained in this proposal, the use of a APB powder disinfectant has the following advantage ...

    SBIR Phase I 2022 Department of CommerceNational Institute of Standards and Technology
  2. Novel probes for real time monitoring of dissolved gases and their isotopologues in aquatic ecosystems

    SBC: AERODYNE RESEARCH INC            Topic: 93

    Ocean ecosystems are critical to the regulation of Earth’s climate and biodiversity, while also hosting a range of direct and indirect benefits to people, from being a food source to recreation. Coastal ocean systems are dynamic regions especially rich in diverse biological and geochemical interactions. However, major gaps exist in our knowledge of the primary biogeochemical processes and the fa ...

    SBIR Phase II 2023 Department of CommerceNational Oceanic and Atmospheric Administration
  3. In Situ and Point of Sale Quantification of Human Pathogens Associated with Aquaculture and Shellfish Farming Using Novel Surface Enhanced Raman Spectroscopy

    SBC: COASTALOCEANVISION, INC            Topic: 93

    There is a dire need for technology to rapidly and accurately detect and quantify Escherichia coli serotypes 0157:H7 and K12 and Vibrio parahaemolyticus and total fecal coliforms. In Phase I we developed a novel approach to Surface Enhanced Raman Spectroscopy (SERS) for detecting human pathogens in cultured bacteria, mixtures of organisms and in oyster tissue. Our approach uses a higher energy las ...

    SBIR Phase II 2023 Department of CommerceNational Oceanic and Atmospheric Administration
  4. High Throughput Experimental Discovery and Optimization for 3D Nanofabrication of Optical & Photonic Materials and Devices.

    SBC: IRRADIANT TECHNOLOGIES INC.            Topic: 2

    The fields of optics and photonics have long sought methods by which to do 3D nanofabrication; however, all methods to date have been lacking in material choices, speed, and possible geometries. Implosion Fabrication (ImpFab) is newly developed method for the 3D nanofabrication that is uniquely suited to address these needs and can therefore act as a platform for the future manufacturing of optica ...

    SBIR Phase II 2022 Department of CommerceNational Institute of Standards and Technology
  5. CO2 Scrubber Material

    SBC: PHYSICAL SCIENCES INC.            Topic: SOCOM222003

    Critical need for a non-toxic, regenerative carbon dioxide (CO2) scrubber material with enhanced scrubbing capacities and safety for rebreather applications. The current state-of-the-art (SOA) scrubber material for rebreather is soda lime. Soda lime is highly toxic, has low CO2 capacity, and is non-regenerative requiring an entire logistics chain. Physical Sciences Inc. (PSI) is developing a novel ...

    SBIR Phase II 2023 Department of DefenseSpecial Operations Command
  6. Artificial Intelligence Driven Voice Control at the Edge (ADViCE)

    SBC: Morsecorp, Inc            Topic: SOCOM224D005

    Hands/Off Tactical Mobile Intelligent Communications (HOT MIC) is an edge/deployed AI solution for voice command and control (VC2) of sUAS and other potential unmanned systems. Today’s SOCOM operator needs to easily enlist new capabilities to the fight such as small Unmanned Air Systems (sUAS) while reducing task saturation and keeping focus down range. An intuitive, robust, hands/free voice use ...

    SBIR Phase II 2023 Department of DefenseSpecial Operations Command
  7. Antenna Distribution System

    SBC: SI2 TECHNOLOGIES, INC            Topic: SOCOM211001

    SI2 Technologies, Inc. (SI2) proposes building and testing a software configurable, wideband, open standard architecture, antenna distribution system that will allow USSOCOM to connect a series of RF receiver/transmitters that can be electronically assigned to any antenna connected to the system. SI2’s design will allow an operator to reconfigure an RF device then remotely connect the device to ...

    SBIR Phase II 2022 Department of DefenseSpecial Operations Command
  8. Stand/Off Precision Guided Weapon Program Cruise Missile Contested Environment

    SBC: SCIENTIFIC SYSTEMS CO INC            Topic: SOCOM213003

    To engage a high value target in GPS/contested conditions over any significant distance, small Common Launch Tube (CLT) munitions must be able to navigate in the absence of GPS. This requires an alternate navigation solution that is able to constrain the drift of the micro/electro/mechanical system (MEMS) quality inertial measurement units (IMUs) in order to accurately navigate to the target area ...

    SBIR Phase II 2023 Department of DefenseSpecial Operations Command
  9. Contact-free optical metrology for energy-efficient manufacturing of mechanical metamaterials (Phase II)

    SBC: MULTISCALE SYSTEMS, INC.            Topic: 2

    Mechanical metamaterials are a class of advanced materials that use repeated three-dimensional geometric patterns to endow common materials with new, enhanced, and superior material properties. The “meta” in “metamaterials” refers to the geometric pattern, while the “material” can be a metal, polymer, ceramic, etc. Our expertise focuses on the design and production of mechanical metama ...

    SBIR Phase II 2022 Department of CommerceNational Institute of Standards and Technology
  10. Scanning Probe Microscopy with Active Optical Probes: A Novel Approach to Measurements and Nanomanufacturing

    SBC: Actoprobe LLC            Topic: 2

    Actoprobe LLC proposes development of a novel class of Atomic Force Microscopy (AFM) active optical probes with dramatically increased sensitivity and spatial resolution for Near-Field Optical Nanospectroscopy and Nanoscopy. The innovation is accomplished by integrating a diode laser source and a photodetector into a silicon AFM probe in such a way that both the AFM tip and detector are inside the ...

    SBIR Phase I 2023 Department of CommerceNational Institute of Standards and Technology
US Flag An Official Website of the United States Government