You are here
Award Data
The Award database is continually updated throughout the year. As a result, data for FY24 is not expected to be complete until March, 2025.
Download all SBIR.gov award data either with award abstracts (290MB)
or without award abstracts (65MB).
A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.
The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.
-
Scanning Probe Microscopy with Active Optical Probes: A Novel Approach to Measurements and Nanomanufacturing
SBC: Actoprobe LLC Topic: 2Actoprobe LLC proposes development of a novel class of Atomic Force Microscopy (AFM) active optical probes with dramatically increased sensitivity and spatial resolution for Near-Field Optical Nanospectroscopy and Nanoscopy. The innovation is accomplished by integrating a diode laser source and a photodetector into a silicon AFM probe in such a way that both the AFM tip and detector are inside the ...
SBIR Phase I 2023 Department of CommerceNational Institute of Standards and Technology -
SmartCam 3D (SC3D)
SBC: Rapid Imaging Technologies LLC Topic: AF191010As USSOCOM continues to assess the future operating environment, implementing innovative solutions that promote situational awareness (SA) is of increasing importance. While situational awareness can be tied to a variety of data-types impacting a mission, for the purposes of this effort, situational awareness tied to geospatial intelligence will be the focus. When a warfighter enters an operating ...
SBIR Phase II 2023 Department of DefenseSpecial Operations Command -
Solid State High Energy Density Batteries
SBC: FRAMERGY INC Topic: SOCOM222001Modern lithium ion batteries are known for their poor safety performance, with many reports of battery failure and fire having been reported. One of the major causes of battery fire is from the use of flammable solvents, such as organic carbonates, as the electrolyte. These hazards have long limited the usage of batteries in dangerous conditions, such as on the battlefield. To combat this issue, t ...
SBIR Phase II 2023 Department of DefenseSpecial Operations Command -
Optically Transparent Tapered Resistive Films
SBC: Nanovox, LLC Topic: SOCOM16004To enhance U.S. Navy operations, a technology platform will be developed for fabricating environmentally robust, visible through near-infrared (NIR) band transparent, tapered resistivity films. After refining the operational requirements and updating the device design models, a design trade study will be performed using the measured electrical (i.e., conductivity) and optical (i.e., spectral trans ...
SBIR Phase II 2022 Department of DefenseSpecial Operations Command -
Solid State High Energy Density Batteries
SBC: FRAMERGY INC Topic: SOCOM222001Modern lithium ion batteries are known for their poor safety performance, with many reports of battery failure and fire having been reported. One of the major causes of battery fire is from the use of flammable solvents, such as organic carbonates, as the electrolyte. These hazards have long limited the usage of batteries in dangerous conditions, such as on the battlefield. To combat this issue, f ...
SBIR Phase I 2022 Department of DefenseSpecial Operations Command -
High-Performance Multi-Platform/Sensor Computing Engine
SBC: EM PHOTONICS INC Topic: SOCOM203003As sensing, computing, and computational imaging technology advances, it becomes more feasible to integrate them into tightly coupled and fully featured solutions in minimal size, weight, and power – cost (SWaP-C) form factors. In this project, we will develop a camera system for use in a variety of scenarios, from surveillance to targeting systems. Our focus will be building a computational ima ...
SBIR Phase I 2021 Department of DefenseSpecial Operations Command -
High-Throughput, High-Pressure, Small-Angle Neutron Scattering Sample Environment
SBC: STF TECHNOLOGIES LLC Topic: 2The product to be delivered based on this innovation is a neutron scattering sample environment that enables efficient neutron scattering measurements of biopolymer solutions at high pressure. The proposed high-throughput, high-pressure small-angle neutron scattering (HTHP-SANS) sample environment addresses key customer needs and provides substantial advantages to both the scientific user ...
SBIR Phase II 2021 Department of CommerceNational Institute of Standards and Technology -
The Full Integration of a Portable Bacterial Concentrator with a Pathogen Detector Device
SBC: OMNIVIS INC Topic: 90This SBIR Phase II project proposes to integrate an easy to use, inexpensive, and portable bacterial concentrator with a handheld pathogen detection system to enable ultra-low cholera pathogen (Vibrio cholerae) detection. Cholera affects communities across 41 countries, including in Yemen, where in the first 5 months of 2020 has had 110,000 suspected cases. Current methods used to detect the chole ...
SBIR Phase II 2020 Department of CommerceNational Institute of Standards and Technology -
Dynamic Incident Intelligence System, Utilizing Adaptation to Real-Time Information
SBC: Emergent Health Care Solutions Topic: 90Emergent Healthcare Solutions proposes to research the feasibility of a dynamic cloud-based incident Intelligence System called Emergent Cloud. Emergent Cloud is an application service providing firefighters and Emergency Medical Technicians access to an interactive incident roadmap and real-time workflow and record keeping. The general aim of the proposed project is to revolutionize the user expe ...
SBIR Phase I 2020 Department of CommerceNational Institute of Standards and Technology -
Direct Performance Evaluation of Additive Manufacturing Process Plans
SBC: INTACT SOLUTIONS, INC Topic: 90Additive manufacturing is steadily advancing towards fulfilling its promise of customized and on-demand production of functional parts. However, performance of as-manufactured parts can differ significantly from the as-designed parts because the as-manufactured geometry differs from the as-designed geometry and the as-manufactured material properties are unknown. Attempts to predict performance of ...
SBIR Phase II 2020 Department of CommerceNational Institute of Standards and Technology