List

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY19 is not expected to be complete until April, 2020.

  1. Advanced Printed Circuit Board Design Methods for Compact Optical Transceiver

    SBC: VOXTEL, INC.            Topic: A15AT001

    To meet the U.S. military needs for hardened laser-ranging sensors for munitions applications, a compact, high-repetition-rate, high-pulse-energy laser rangefinder will be developed consisting of a temperature-stabilized avalanche photodiode (APD) receiver, with a few photons equivalent sensitivity, and a miniature diode-pumped microchip laser. An existing integrated circuit design will be updated ...

    STTR Phase II 2016 Department of DefenseArmy
  2. ASP Motion Base for Stabilized Mounts

    SBC: FLEX FORCE ENTERPRISES LLC            Topic: A12079

    The ASP family of stabilized weapon mounts is ideal for use in airborne, shipboard, and land applications when platform stability significantly reduces gunner effectiveness. The ASP three axis gyro stabilized weapon mount is designed to dramatically increase gunner accuracy (>10x increase in hit probability) even during aggressive platform maneuvers. The ASP is the ideal solution for coastal patro ...

    SBIR Phase II 2016 Department of DefenseArmy
  3. Nonlinear Optical Threat Protection Technologies for Daytime Cameras

    SBC: VOXTEL, INC.            Topic: A16083

    To protect daytime cameras against laser threats, new, innovative first-order (linear) and third-order (nonlinear) optical materials and optical systems will be designed to provide protection against both continuous-wave (CW) and pulsed lasers operating throughout the wavelength range of common daytime and low-light-level imaging cameras (400 nm through 1100 nm). The approach is based on optical-g ...

    SBIR Phase I 2016 Department of DefenseArmy
  4. Advanced Spectrally Selective Materials for Obscurant Applications

    SBC: LUMILANT, INC.            Topic: A13AT016

    Plasmonic metamaterials, composed of patterned metallic and dielectrics, can be engineered to have interesting optical properties that are attractive for a range of advanced obscurant applications. These particles are typically fabricated on planar surfaces, since patterning planar surfaces to achieve the desired effects is relatively straightforward.However, for planar geometries the particles op ...

    SBIR Phase II 2016 Department of DefenseArmy
  5. Multimodal Non- destructive Evaluation of Internal Surfaces of Holes in Steel Structures

    SBC: ALPHASENSE, INC.            Topic: A16012

    A bore evacuator is generally used in gun barrel of armored fighting vehicles to help prevent poisonous propellant gases from venting back into the fighting compartment. It consists of a ring of holes drilled into the barrel, surrounded by a cylindrical pressure reservoir. Under typical operating conditions, pitting corrosions and stress corrosion cracks can form in the inner walls of those drille ...

    SBIR Phase I 2016 Department of DefenseArmy
  6. Transparent Tapered Resistive Elements

    SBC: VOXTEL, INC.            Topic: SOCOM16004

    A robust system level design process will be used to identify the design of transparent tapered resistive (TTR) elements, including the materials, fabrication processes, and lifecycle costs. The transparent tapered resistive film will be designed to provides a tapered resistive layer across the film while remaining transparent in the visual and near-infrared optical bands for use in radio-frequenc ...

    SBIR Phase I 2016 Department of DefenseSpecial Operations Command
  7. Multi-material Additive Manufacturing of RF Electronics

    SBC: DeLUX Engineering, LLC            Topic: A16006

    To reduce size, weight, power and cost (SWaP-c) military platforms have been evolving towards a more integrated design approach that efficiently utilizes all available space.To accommodate limited space constraints many commercial off-the-shelf (COTS) systems will need to be replaced by custom designed and fabricated components.For the case of radiofrequency (RF) electronic systems this will requi ...

    SBIR Phase I 2016 Department of DefenseArmy
  8. Adaptive-Zoom Weapon Scope with Integral Ranging, Tracking, and Fire Control

    SBC: VisSidus Technologies, Inc.            Topic: A152096

    Birds of prey, also known as raptors, are birds that hunt or feed on other animals. They are characterized by keen vision that allows them to detect prey during flight. Since vision is the most important sense for birds, and good eyesight is essential for safe flight, this group has a number of adaptations which give visual acuity superior to that of other vertebrate groups.The objective of this S ...

    SBIR Phase I 2016 Department of DefenseArmy

Agency Micro-sites

SBA logo
Department of Agriculture logo
Department of Commerce logo
Department of Defense logo
Department of Education logo
Department of Energy logo
Department of Health and Human Services logo
Department of Homeland Security logo
Department of Transportation logo
Environmental Protection Agency logo
National Aeronautics and Space Administration logo
National Science Foundation logo
US Flag An Official Website of the United States Government