You are here
Award Data
The Award database is continually updated throughout the year. As a result, data for FY24 is not expected to be complete until March, 2025.
Download all SBIR.gov award data either with award abstracts (290MB)
or without award abstracts (65MB).
A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.
The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.
-
Human monoclonal antibodies as countermeasures for T-2 mycotoxin
SBC: ABZYME THERAPEUTICS LLC Topic: CBD152003Mycotoxins are fungal toxins to which exposure frequently results in incapacitation or even in death. Natural outbreaks of mycotoxin poisoningare common worldwide. Due to its physical-chemical properties, high toxicity and relative ease to produce, mycotoxin T-2 is classified as apotential biological warfare agent. Currently there are no FDA approved medical countermeasures available for T-2 mycot ...
SBIR Phase I 2016 Department of DefenseOffice for Chemical and Biological Defense -
Protein Qspec: An Improved Method for Rapid Characterization of Protein Aggregates in Biologic Drugs for Increased Quality and Safety
SBC: OPTOFLUIDICS, INC. Topic: 90201Optofluidics will develop Protein Qspec, a new particle analysis QC instrument designed to characterize protein aggregates in biologic drugs. The primary concern for this class of therapeutics is that they can elicit an immune response from patients who develop anti-drug antibodies which can eliminate the therapeutic benefit. The presence of particulate matter, in these therapeutics (e.g. shed gla ...
SBIR Phase I 2016 Department of CommerceNational Institute of Standards and Technology -
Adjustable Focus Lenses for Respiratory Protection
SBC: VOXTEL, INC. Topic: CBD152001A low-cost, adjustable optical-correction technology will be developed for integration with AVON M50 respiratory protective masks, allowing forfast, adjustable vision correction. Variable-focus lenses will be designed using 3D freeform gradient index materials, which allow both opticalpower and geometric and chromatic aberrations corrections to be achieved in planar films. A Phase I prototype will ...
SBIR Phase I 2016 Department of DefenseOffice for Chemical and Biological Defense -
Single domain antibodies as medical countermeasures for viral induced encephalitis
SBC: ABZYME THERAPEUTICS LLC Topic: CBD161004Alphavirus infection, which may cause encephalitis and death, are recognized as potential biological warfare agents. There are no approved medical countermeasures against diseases caused by Alphaviruses. In this project, thermostable single domain antibodies capable of crossing the blood brain barrier (BBB) and neutralizing encephalitic viruses will be developed using Abzymes proprietary in vivo S ...
SBIR Phase I 2016 Department of DefenseOffice for Chemical and Biological Defense -
Transparent Tapered Resistive Elements
SBC: VOXTEL, INC. Topic: SOCOM16004A robust system level design process will be used to identify the design of transparent tapered resistive (TTR) elements, including the materials, fabrication processes, and lifecycle costs. The transparent tapered resistive film will be designed to provides a tapered resistive layer across the film while remaining transparent in the visual and near-infrared optical bands for use in radio-frequenc ...
SBIR Phase I 2016 Department of DefenseSpecial Operations Command -
Detecting Substandard, Nonconforming, Improperly Processed and Counterfeit Materiel
SBC: VIBRANT CORP Topic: DLA15C001Vibrant Corporation and Sandia National Laboratories (SNL) propose to apply Process Compensated Resonance Testing (PCRT) to the DLA's need for an NDI method to detect counterfeit, nonconforming and improperly processed materiel. PCRT collects and analyzes the resonance frequencies of a component to detect structural defects, characterize material, analyze population variation, monitor manufacturin ...
STTR Phase I 2016 Department of DefenseDefense Logistics Agency -
Ultra High-Speed Spectroradiometry for Contamination Reconnaissance and Surveillance
SBC: SEMIOTIC ENGINEERING ASSOC. LLC Topic: CBD09107We propose to demonstrate the feasibility of a novel ultra-high-speed (UHS) infrared spectrometer that will operate as an essential component of Thermal Luminescence systems for standoff detection of surface contaminants. The proposed spectrometer will be able to detect transient thermal events in the fundamental vibrational fingerprint region of chemical warfare agents and of most toxic industria ...
SBIR Phase I 2009 Department of DefenseOffice for Chemical and Biological Defense -
Micro-Positioner Replacement of Piezo Actuators in Long-working Distance Interference Microscopes
SBC: E. M. Optomechanical, Inc. Topic: N/AThe NIST patented six-degree of freedom micropositioner technology associated with this subtopic has been identified by E M Optomechanical, Inc. (EMOM) as a technology that could be incorporated into the company¿s long-working distance interference microscopes. A key element in these microscopes is a piezo-actuator device, installed in a manual pitch/yaw mount, which translates a small flat mirro ...
SBIR Phase I 2009 Department of CommerceNational Institute of Standards and Technology -
Low Visibility Decoy Flare
SBC: GENERAL SCIENCES INC Topic: SOCOM09002Low visibility rotary aircraft decoys are needed to protect vehicles against heat seeking missile attacks without illuminating the target which exposes the aircraft to small arms fire and potentially compromising the mission. The novel approach to this challenge is to produce a decoy which emits only in the bands of interest utilizing techniques such as containment and composition selection to op ...
SBIR Phase I 2009 Department of DefenseSpecial Operations Command -
Advanced Technologies for Discrete-Parts Manufacturing
SBC: HT MICROANALYTICAL, INC. Topic: DLA08001HT Micro proposes to establish a metal MEMS manufacturing process as an effective high rate component manufacturing technology. This will bring miniaturization and cost savings comparable to that provided by conventional silicon MEMS manufacturing to a very large number of important new applications. Metal MEMS micro-fabrication is established at the research and prototype level, but has not been ...
SBIR Phase I 2009 Department of DefenseDefense Logistics Agency