You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY20 is not expected to be complete until September, 2021.

  1. Reverse Engineering Technical Data Packages for Development of Alternate Sources of Supply for DLA Nuclear Enterprise Support Office (NESO) NSN: 4730-01-255-5316

    SBC: DeVal Corporation            Topic: DLA183005

    DeVal Lifecycle Support is proposing to improve product availability and increase competition through the development of a Source Approval Requests (SAR) for NSN 4730-01-255-5316 with government provided technical data through our Reverse Engineering (RE) Process. Upon contract award, if DLA has adequate technical data available, DeVal Lifecycle Support will utilize the technical data to develop a ...

    SBIR Phase I 2019 Department of DefenseDefense Logistics Agency
  2. Recovery of Rare Earth Elements from NdFeB Magnet Powders through Reactive Grinding

    SBC: Advanced Cooling Technologies, Inc.            Topic: DLA183012

    REEs have grown in importance over the years because of their applications in electronics (smart phone, high definition display), rechargeable batteries, renewable/green energy, and defense industry. The United States consumes around 16 thousand tons of REEs annually. However, China produced roughly 97 percent of the world’s supply of REEs, and will likely continue to dominate the global supply. ...

    SBIR Phase I 2019 Department of DefenseDefense Logistics Agency
  3. Enhancing the Technology to Process Aerospace Grade Chromium Metal with Low Non-Metallic Impurities

    SBC: ENVIRONMENTAL & METALLURGICAL CONSULTANCY LLC            Topic: DLA183014

    Chromium is used in the hottest part of a jet engine as an alloying element is superalloys. None metallic impurities generally cause performance degradation and they have to be controlled. The existing chromiums used in supperalloys have C+S+O+ N+H>900 ppm according to specification. We are proposing to develop methods of refining that produce C+S+O+ N+H1400 C. Another method is using hydrogen at ...

    SBIR Phase I 2019 Department of DefenseDefense Logistics Agency
  4. Advanced Manufacturing Technologies

    SBC: Onto Technology, LLC            Topic: DLA152001

    This Phase II Small Business Innovation Research project develops the scale of lithium-ion direct recycling technologies applied to gain efficiencies in materials management from original manufacturing to end-of-life. The scrap materials are from Defense Logistics Agency manufacturing activities. A successful effort moves direct recycle TRL from 4 to 6, increases process throughput, qualifies mate ...

    SBIR Phase II 2019 Department of DefenseDefense Logistics Agency
  5. Extending Fresh Fruits and Vegetables (FF&V) Shelf Life through novel technology in the Subsistence Supply Chain

    SBC: AA Plasma LLC            Topic: DLA182002

    Current methods for food transportation and storage are insufficient in eliminating contamination threats from food-borne pathogens, resulting in frequent cases of foodborne illness and costly recalls. Perishable products within the DLA’s subsistence supply chain are no exception to this problem. AAPlasma LLC proposes a non-equilibrium (“cold”) plasma-based solution that will continuously di ...

    SBIR Phase II 2019 Department of DefenseDefense Logistics Agency
  6. Protein Qspec: An Improved Method for Rapid Characterization of Protein Aggregates in Biologic Drugs for Increased Quality and Safety

    SBC: OPTOFLUIDICS, INC.            Topic: 90201

    Optofluidics will develop Protein Qspec, a new particle analysis QC instrument designed to characterize protein aggregates in biologic drugs. The primary concern for this class of therapeutics is that they can elicit an immune response from patients who develop anti-drug antibodies which can eliminate the therapeutic benefit. The presence of particulate matter, in these therapeutics (e.g. shed gla ...

    SBIR Phase I 2016 Department of CommerceNational Institute of Standards and Technology
  7. Transparent Tapered Resistive Elements

    SBC: VOXTEL, INC.            Topic: SOCOM16004

    A robust system level design process will be used to identify the design of transparent tapered resistive (TTR) elements, including the materials, fabrication processes, and lifecycle costs. The transparent tapered resistive film will be designed to provides a tapered resistive layer across the film while remaining transparent in the visual and near-infrared optical bands for use in radio-frequenc ...

    SBIR Phase I 2016 Department of DefenseSpecial Operations Command
  8. Detecting Substandard, Nonconforming, Improperly Processed and Counterfeit Materiel

    SBC: VIBRANT CORPORATION            Topic: DLA15C001

    Vibrant Corporation and Sandia National Laboratories (SNL) propose to apply Process Compensated Resonance Testing (PCRT) to the DLA's need for an NDI method to detect counterfeit, nonconforming and improperly processed materiel. PCRT collects and analyzes the resonance frequencies of a component to detect structural defects, characterize material, analyze population variation, monitor manufacturin ...

    STTR Phase I 2016 Department of DefenseDefense Logistics Agency
US Flag An Official Website of the United States Government