You are here
Award Data
The Award database is continually updated throughout the year. As a result, data for FY24 is not expected to be complete until March, 2025.
Download all SBIR.gov award data either with award abstracts (290MB)
or without award abstracts (65MB).
A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.
The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.
-
Process Compensated Resonance Testing for Additive Manufacturing Process Monitoring and Control and Gas Turbine Engine Component
SBC: VIBRANT CORP Topic: DLA181002The DLA and Air Force Sustainment Center (AFSC) require procedures for acceptance of repairs and replacement parts made with additive manufacturing (AM). Tools for monitoring and control of AM processes are vital to that acceptance procedure. Vibrant Corporation provides process monitoring and control and nondestructive evaluation (NDE) services with its Process Compensated Resonance Testing (PCRT ...
SBIR Phase II 2020 Department of DefenseDefense Logistics Agency -
Field Deployable Additive Manufacturing Capability
SBC: ExOne Company, The Topic: DLA201D004The ExOne Company (ExOne) is teaming with Dynovas, Inc. (Dynovas) and working with San Diego Composites dba Applied Composites AC-SD to continue the development of a Field Optimized Additive Manufacturing (FOAM) pod capability. ExOne provides expertise in binder jet 3D printing and design, build, and commercially produce additive manufacturing equipment for polymers, metals, and ceramics. The ExOn ...
SBIR Phase II 2020 Department of DefenseDefense Logistics Agency -
Pulsed Plasma Treatment for Rapid In-Between-Patient Disinfection of Non-Invasive Ventilation Systems and Personal Protection Equipment After COVID-19 Use
SBC: AA PLASMA LLC Topic: DLA182002Current methods for disinfecting personal protective equipment (PPE) such as N95 masks and garments typically demand long turnaround times, resulting in the inability to reuse these instrumental tools during times of high stress, as can be seen in the recent COVID-19 pandemic. These disinfection cycles can last anywhere from one hour (ethylene oxide) to up to 24 hours (heat treatment). To address ...
SBIR Phase II 2020 Department of DefenseDefense Logistics Agency -
Enhancing the Technology to Process Aerospace Grade Chromium Metal with Low Non-Metallic Impurities
SBC: ENVIRONMENTAL & METALLURGICAL CONSULTANCY LLC Topic: DLA183014This is a proposal to investigate further the results of the phase I project. In phase one our method of purifying chromium to reduce O, N, C, S, H was successful with one of the two methods. In this phase we will continue improving successful process and investigate a new method. In phase one we were able to reduce the oxygen from 4,200 ppm to 1,100 ppm. And we have not explored at least 2 variab ...
SBIR Phase II 2020 Department of DefenseDefense Logistics Agency -
Tactical Active Anti-Fogging Goggle or Spectacle
SBC: Abom, Inc. Topic: SOCOM181003Develop an innovative tactical active anti-fogging goggle or spectacle in a smaller form factor than traditional goggles.
SBIR Phase II 2020 Department of DefenseSpecial Operations Command -
SBIR 19.2 Phase II
SBC: DeVal Life Cycle Support, LLC Topic: DLA192001DeVal Lifecycle Support has utilized its success in the existing SBIR program to replicate NSN 4730-00-066-7779 Tee Tube to Boss. Using the companies unique and revolutionary R.O.P.E. (Rapid Obsolescence Planning and Execution) process to create an entire technical drawing package and manufacturing drawing package, Deval has produced a solution to the problem that has become increasingly more ...
SBIR Phase II 2020 Department of DefenseDefense Logistics Agency -
Advancing Flood Extent Delineation Modeling Using Synthetic Aperture Radar (SAR) Data
SBC: Azavea Inc. Topic: 9503The proposed research will advance flood inundation mapping and enhance situational awareness in disaster response situations through a combination of machine learning techniques and Synthetic Aperture Radar (SAR) data. One of the most difficult challenges during the early stages of a flood event is acquiring timely, unobstructed Earth observation data that can provide lifesaving insight into the ...
SBIR Phase I 2020 Department of CommerceNational Oceanic and Atmospheric Administration -
Transparent Tapered Resistive Elements
SBC: VOXTEL, INC. Topic: SOCOM16004A robust system level design process will be used to identify the design of transparent tapered resistive (TTR) elements, including the materials, fabrication processes, and lifecycle costs. The transparent tapered resistive film will be designed to provides a tapered resistive layer across the film while remaining transparent in the visual and near-infrared optical bands for use in radio-frequenc ...
SBIR Phase I 2016 Department of DefenseSpecial Operations Command -
Non-Equilibrium Short-Pulsed Discharge for Removal of Antibiotics and Pathogens from Water used in Aquacultural Facilities
SBC: AA PLASMA LLC Topic: 9101"Seafood consumption in the United States has risen to over 50% per capita over the last 25 years with over 75% of total U.S. seafood consumption coming from import. These trends, if continued, place a high importance on the safety aspect of seafood trade. Despite the lack of evidence supporting higher risk in imported food, many of the U.S. seafood import sources are located in tropical areas whe ...
SBIR Phase I 2020 Department of CommerceNational Oceanic and Atmospheric Administration -
Detecting Substandard, Nonconforming, Improperly Processed and Counterfeit Materiel
SBC: VIBRANT CORP Topic: DLA15C001Vibrant Corporation and Sandia National Laboratories (SNL) propose to apply Process Compensated Resonance Testing (PCRT) to the DLA's need for an NDI method to detect counterfeit, nonconforming and improperly processed materiel. PCRT collects and analyzes the resonance frequencies of a component to detect structural defects, characterize material, analyze population variation, monitor manufacturin ...
STTR Phase I 2016 Department of DefenseDefense Logistics Agency