Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY19 is not expected to be complete until June, 2020.

  1. Enhanced Soil Vapor Extraction

    SBC: COMPACT MEMBRANE SYSTEMS, INC.            Topic: N/A

    Conventional volatile organic compound (VOC) recovery membranes (silicone rubber) preferentially transport organics over air. Although this silicone rubber has shown some success, it is not appropriate upstream of catalytic oxidation. Catalytic oxidation requires modest increases in VOC concentration at pressure to maintain performance. This is best achieved by using a reverse separation membra ...

    SBIR Phase I 2003 Environmental Protection Agency
  2. Retrofitting Diesel Electrical Generators for Emission Reduction

    SBC: COMPACT MEMBRANE SYSTEMS, INC.            Topic: N/A

    Diesel generator sets (gen-sets) are used routinely to supply electrical power. Hospitals, businesses, and small communities use gen-sets to help reduce costs by load leveling and provide emergency power during blackouts (either scheduled or unscheduled). Recent power outages in California have led to large increases in the purchase of gen-sets, primarily for providing emergency power. In addit ...

    SBIR Phase II 2003 Environmental Protection Agency
  3. Recycling of Industrial Phosphate Waste as Raw Material for Innovative Iron Phosphate Glass Fibers

    SBC: MO-SCI Corp.            Topic: N/A

    During this Phase I research project, MO-SCI Corporation will develop a method for recycling industrial phosphate waste as a low-cost raw material for innovative iron phosphate glass fibers. Iron and zinc phosphate sludge generated by the automobile, heavy equipment, appliance, fastener, and other industries using metal phosphating processes typically is landfilled. Preliminary work on industria ...

    SBIR Phase I 2003 Environmental Protection Agency
  4. A Carbon-Polymer Matrix-Based Flue Gas Desulfurization Technology

    SBC: CM-Tec, Inc.            Topic: N/A

    This Phase I research project involves an innovative technology for sulfur dioxide (SO2) removal from coal-burning flue gases: flue gas desulfurization (FGD) technology. The current FGD technologies are expensive and energy extensive, and they generate secondary pollution. For example, the limestone-based wet scrubber FGD system costs up to 15 percent of the total construction cost of a coal-fi ...

    SBIR Phase I 2003 Environmental Protection Agency
  5. Tool Condition Monitoring and Diagnostics

    SBC: VulcanCraft            Topic: N/A

    A smart machine tool must be able to monitor its condition and report problems. Every CNC machine should provide an alarm for tool condition problems, including tool wear, much as every automobile has a low oil indicator. Tool wear is particularly important for unattended machining as a worn tool can ruin a part. All current tool condition systems operate "blind" without direct information on curr ...

    SBIR Phase I 2003 Department of CommerceNational Institute of Standards and Technology
US Flag An Official Website of the United States Government