You are here
Award Data
The Award database is continually updated throughout the year. As a result, data for FY23 is not expected to be complete until September, 2024.
Download all SBIR.gov award data either with award abstracts (290MB)
or without award abstracts (65MB).
A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.
The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.
-
Development of UltrastableTi:sapphire Lasers for Optical Clock and Spectroscopy Applications
SBC: Kapteyn-Murnane Laboratories, Inc. Topic: N/AThis Small Business Innovation Research Phase 1 project proposes to develop a femtosecond laser system optimized for optical clocks and other precision metrology applications. In principle, atomic optical transitions have the potential to provide radically higher-accuracy timekeeping, because of the very high frequency of an optical transition. The problem of counting, or down-counting, the oscill ...
SBIR Phase I 2003 Department of CommerceNational Institute of Standards and Technology -
Direct-Digital Phase & Amplitude Noise Measurement System
SBC: TIMING SOLUTIONS Topic: N/AWe propose to compare alternative architectures for phase noise measurement by directly sampling the RF waveform. Out of band modulation and cross correlation will reduce noise. The capabilities of each architecture will be determined using analysis and simulation. The results will be used to determine the feasibility of developing a commercially useful measurement instrument. If the results are p ...
SBIR Phase I 2003 Department of CommerceNational Institute of Standards and Technology -
Self-Mobile Trailier
SBC: Micro Analysis & Design Inc Topic: N/AThe combat load for today's individual Special Operations Forces warfighter is 100 pounds or more, which is unacceptably high. Lighter loads will reduce SOF operator fatigue, and increase his ability to move greater distances in a shorter time than ispossible today. As a solution to this problem, we propose to design a self-mobile trailer, a robotic
SBIR Phase I 2003 Department of DefenseSpecial Operations Command -
Tool Condition Monitoring and Diagnostics
SBC: VulcanCraft Topic: N/AA smart machine tool must be able to monitor its condition and report problems. Every CNC machine should provide an alarm for tool condition problems, including tool wear, much as every automobile has a low oil indicator. Tool wear is particularly important for unattended machining as a worn tool can ruin a part. All current tool condition systems operate "blind" without direct information on curr ...
SBIR Phase I 2003 Department of CommerceNational Institute of Standards and Technology