Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY19 is not expected to be complete until September, 2020.

  1. Compact, Turnable Diode Laser for Water-Vapor Spectroscopy

    SBC: Vescent Photonics LLC            Topic: N/A

    We will develop a compact external cavity stabilization system, which will employ independent electro-optic control over the optical path length of the cavity and a wavelength-selective element. The system should be able to cover a 30 nm range and give mode-hop-free tuning over 20 nm intervals. The design of the feedback system will be compatible with any commercially available laser diode from 63 ...

    SBIR Phase II 2003 Department of CommerceNational Institute of Standards and Technology
  2. Development of UltrastableTi:sapphire Lasers for Optical Clock and Spectroscopy Applications

    SBC: Kapteyn-Murnane Laboratories, Inc.            Topic: N/A

    This Small Business Innovation Research Phase 1 project proposes to develop a femtosecond laser system optimized for optical clocks and other precision metrology applications. In principle, atomic optical transitions have the potential to provide radically higher-accuracy timekeeping, because of the very high frequency of an optical transition. The problem of counting, or down-counting, the oscill ...

    SBIR Phase I 2003 Department of CommerceNational Institute of Standards and Technology
  3. Direct-Digital Phase & Amplitude Noise Measurement System

    SBC: TIMING SOLUTIONS            Topic: N/A

    We propose to compare alternative architectures for phase noise measurement by directly sampling the RF waveform. Out of band modulation and cross correlation will reduce noise. The capabilities of each architecture will be determined using analysis and simulation. The results will be used to determine the feasibility of developing a commercially useful measurement instrument. If the results are p ...

    SBIR Phase I 2003 Department of CommerceNational Institute of Standards and Technology
  4. Self-Mobile Trailier

    SBC: Micro Analysis & Design Inc            Topic: N/A

    The combat load for today's individual Special Operations Forces warfighter is 100 pounds or more, which is unacceptably high. Lighter loads will reduce SOF operator fatigue, and increase his ability to move greater distances in a shorter time than ispossible today. As a solution to this problem, we propose to design a self-mobile trailer, a robotic

    SBIR Phase I 2003 Department of DefenseSpecial Operations Command
  5. Surface Selective Chiral Detection: A New Metrology Technique

    SBC: Vescent Photonics LLC            Topic: N/A

    The near chiral purity of the biosphere leads to a vast array of chiro-specific physiological responses. This chiro-specificity, in turn, gives rise to the need for the manufacturing of enantiomerically pure chiral chemicals, such as pesticides, pharmaceuticals, food additives, pigments, etc. Critical to the efficacy of both chiro-specific biology and chiro-synthesis/separation are the interfacial ...

    SBIR Phase II 2003 Department of CommerceNational Institute of Standards and Technology
  6. Tool Condition Monitoring and Diagnostics

    SBC: VulcanCraft            Topic: N/A

    A smart machine tool must be able to monitor its condition and report problems. Every CNC machine should provide an alarm for tool condition problems, including tool wear, much as every automobile has a low oil indicator. Tool wear is particularly important for unattended machining as a worn tool can ruin a part. All current tool condition systems operate "blind" without direct information on curr ...

    SBIR Phase I 2003 Department of CommerceNational Institute of Standards and Technology
US Flag An Official Website of the United States Government