Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY19 is not expected to be complete until September, 2020.

  1. Gigabit/Second Random Number Generator Using White Noise Generated by Delayed Optical Homodyne

    SBC: STRUCTURED MATERIALS INDUSTRIES, INC.            Topic: N/A

    SMI proposes Gigabit/second Random Number Generator using the white phase noise generated by delayed optical homodyne. In Phase 1, we have successfully demonstrated and delivered to NIST a bench-top proof of concept of the proposed random noise generator operating at >10 Mega-bit/second. This bench-top demonstration unit is operating today in the NIST laboratories. The delivered system successfull ...

    SBIR Phase II 2007 Department of CommerceNational Institute of Standards and Technology
  2. Fast Curing Modular Composite Patch System for Field Applications

    SBC: Continuum Dynamics Inc            Topic: SOCOM07002

    SOCOM requires a method to field repair multiple materials as well as to mount armor and related hardware for a variety of tactical purposes with a composite material. To address this need, we propose application of a “Modular UV Patch” (MUVP) system that incorporates ultraviolet curing resin systems and an innovative technique for delivering the UV light through optically lossy fibers that f ...

    SBIR Phase I 2007 Department of DefenseSpecial Operations Command
  3. Multi-Purpose, Field Expedient Engineering Composite Material

    SBC: TRIANGLE POLYMER TECHNOLOGIES, INC.            Topic: SOCOM07002

    There is an ongoing requirement for lightweight, strong armor material, long lasting field expedient repair capabilities, and covert attaching of insulated devices to land and water-based targets without inhibiting RF signals. The objective of this proposal is to utilize the epoxy/urethane/acrylate hybrid resin systems that have been commercialized by Triangle Polymer Technologies to develop a str ...

    SBIR Phase I 2007 Department of DefenseSpecial Operations Command
  4. Enhanced Small Arms Ammunition

    SBC: Corvid Technologies LLC            Topic: SOCOM06008

    A number of different special purpose assault rifle rounds are currently required to meet the operational needs of USSOCOM forces. Development of new rounds that provide both enhanced penetration and lethality is necessary to increase the overall effectiveness of USSOCOM forces, and reduce the need for special purpose ammunition. These enhancements must be obtained with sacrificing bullet accura ...

    SBIR Phase I 2007 Department of DefenseSpecial Operations Command
  5. Liquid Phase Epitaxial Garnet Films for Magneto-Optic Indicators

    SBC: Integrated Photonics, Inc.            Topic: N/A

    Magnetooptic Indicator (MOI) garnet films are an important non-destructive tool for imaging magnetic domains in a wide variety of applications from basic research to quality control. To be effectively used they must be 1) optimized for individual applications using interactive feedback from users, 2) standardized to allow comparison of data, 3) improved in quality and process control and 4) made g ...

    SBIR Phase I 2003 Department of CommerceNational Institute of Standards and Technology
  6. High Sensitivity Directional Hand Held Portable Microelectronics Neutron Detector

    SBC: STRUCTURED MATERIALS INDUSTRIES, INC.            Topic: N/A

    The United States faces a broad range of nuclear threats and technologies are needed to prevent or mitigate nuclear incidents. SMI has invented (patent pending) a near 100 volume percent efficient, real-time, microelectronic self calibrating and directional radiation detector. We can increase detector area to increase broad sensitivity and the number of layers to increase directionality. We herein ...

    SBIR Phase I 2003 Department of CommerceNational Institute of Standards and Technology
  7. Tool Condition Monitoring and Diagnostics

    SBC: VulcanCraft            Topic: N/A

    A smart machine tool must be able to monitor its condition and report problems. Every CNC machine should provide an alarm for tool condition problems, including tool wear, much as every automobile has a low oil indicator. Tool wear is particularly important for unattended machining as a worn tool can ruin a part. All current tool condition systems operate "blind" without direct information on curr ...

    SBIR Phase I 2003 Department of CommerceNational Institute of Standards and Technology
  8. SOF Micro Lab

    SBC: F&H APPLIED SCIENCE ASSOC., INC.            Topic: N/A

    The overall goal of this program is to build a compact, lightweight, portable laboratory kit that can be used to analyze chemistries, cell counts, parasites, bacteria, and other pathogens in blood, urine, and body fluids. Our proposed Portable Micro-Lab(PML) kit will be composed of two sub-systems:1) Environmentally stable microdot test strips smaller than a stick of chewing gum and containing th ...

    SBIR Phase I 2003 Department of DefenseSpecial Operations Command
  9. Battery Modulation for Communications Equipment

    SBC: Policell Technolpgies, Inc.            Topic: N/A

    Policell Technologies Inc. proposes 6 month research effort to demonstrate the feasibility of replacing the lithium BA-5590 with a rechargeable battery. It is proposed to design and develop basic pouch lithium-ion cells that are suitable for assembly ofBA-5590 battery and deliver some basic pouch cells to SOCOM by the end of the Phase I program. The battery system will be based on Policell Technol ...

    SBIR Phase I 2003 Department of DefenseSpecial Operations Command
  10. Advanced Lightweight NBC Protective Clothing

    SBC: UTILITY DEVELOPMENT CORP            Topic: N/A

    N/A

    SBIR Phase II 2003 Department of DefenseSpecial Operations Command
US Flag An Official Website of the United States Government