You are here

Home » Reports

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY24 is not expected to be complete until March, 2025.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.

Displaying 3 result(s)
 
  • Record 1 TO 3

  1. High Efficiency, Large-Area, 1550 nm InGaAs Photodiodes

    SBC: VOXTEL, INC.            Topic: N/A

    A back-illuminated planar InGaAs photodiode tested to have 95% quantum effiiency (QE) at 1550 nm, area greater than 1 mm2, low capacitance (125 MHz) will be improved. Although the existing Phase I device exhibited bulk material dark current generation better than commercially available devices, the sidewall-generated dark current was found to dominate the noise equiva ...

    SBIR Phase II 2010 Department of CommerceNational Institute of Standards and Technology

  2. SOF Life Support Monitor

    SBC: EXTREME ENDEAVORS AND CONSULTING, LLC            Topic: N/A

    Special Operations Command has divided patient care into three phases, evacuation from the hazardous region, triage and transport, and hospital care. A device is required for Phase Two that can sample, monitor and display vital signs, log the parametersin memory for up to twenty-four hours and download vital sign information once the patient has arrived at the medical facility. This system will ...

    SBIR Phase I 2003 Department of DefenseSpecial Operations Command

  3. Tool Condition Monitoring and Diagnostics

    SBC: VulcanCraft            Topic: N/A

    A smart machine tool must be able to monitor its condition and report problems. Every CNC machine should provide an alarm for tool condition problems, including tool wear, much as every automobile has a low oil indicator. Tool wear is particularly important for unattended machining as a worn tool can ruin a part. All current tool condition systems operate "blind" without direct information on curr ...

    SBIR Phase I 2003 Department of CommerceNational Institute of Standards and Technology
US Flag An Official Website of the United States Government