You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY24 is not expected to be complete until March, 2025.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.

  1. Mill trials of a novel formaldehyde-free soy-based wood adhesive for making plywood

    SBC: Lao K LLC            Topic: 09NCERA1

    Interior wood composite panels are widely used for furniture, bookshelves, kitchen cabinets, and flooring, and are predominately made with carcinogenic urea-formaldehyde (UF) resin. A new formaldehyde-free, environmentally friendly wood adhesive that mainly consists of abundant, renewable and readily available soybean flour and a novel curing agent have been developed in a laboratory. The nov ...

    SBIR Phase I 2010 Environmental Protection Agency
  2. Real-time Detection and Identification of Chemical, Biological, and Explosive (CBE) Agents with Low False Alarm Rates

    SBC: VOXTEL, INC.            Topic: 09NCERJ1

    There is a need for technologies that protect the health and welfare of the American people in a terrorist emergency by detecting acts of biological contamination. Of the chemical, biological, and explosive (CBE) agents, anthrax, smallpox, plague, ricin, botulinum toxin, toxic commercial pesticides, and chemical warfare agents present the most threats. Although there are a variety of techniqu ...

    SBIR Phase I 2010 Environmental Protection Agency
  3. Enhanced Ethanol Diesel Blend for Emission Reduction

    SBC: COMPACT MEMBRANE SYSTEMS, INC.            Topic: 05NCERB2

    New engine diesel pollution is addressed in the U.S. Environmental Protection Agency (EPA) Clean Diesel Truck and Buses, low sulfur diesel, and nonroad diesel rules. Unfortunately, slow fleet turnover will extend full implementation. EPA is interested in both retrofit technologies that reduce emissions (particulate matter, volatile organic pollutants, NOx) from diesel sources and new ...

    SBIR Phase I 2006 Environmental Protection Agency
  4. Balloon Platforms for Remote Sensing of Water Quality in Mixing Zones

    SBC: PHYSICAL SCIENCES INC.            Topic: 05NCERD4

    MixZon, Inc., hypothesizes that lightweight infrared (IR) and video cameras mounted on an unmanned tethered helium balloon accessible via a wireless network can remotely sense water quality at site scales. MixZon will demonstrate the technical feasibility of a ground-based network to monitor and control balloon-mounted, IP-enabled wireless IR and video cameras for measurement of the spatial distri ...

    SBIR Phase I 2006 Environmental Protection Agency
  5. An Integrated Ecoroof Energy Analysis Model

    SBC: Quantec, L.L.C.            Topic: 05NCERD5

    Vegetated roofs (ecoroofs) offer diverse benefits, including energy savings and stormwater runoff reductions. Installation of ecoroofs in both new and existing buildings has expanded significantly during the past 5 years, with several local jurisdictions providing incentives for their installation and the Leadership in Energy and Environmental Design green building rating system offering multiple ...

    SBIR Phase I 2006 Environmental Protection Agency
  6. Radiation Fault Analysis for 45 Nanometer CMOS-SOI VLSI Circuits

    SBC: Lynguent, Inc.            Topic: DTRA092001

    State of the art Radiation Hardened by Design (RHBD) techniques must scale down in feature size for radiation effects in 45 nm processes, and also scale up in complexity to support radiation fault analysis of VLSI circuits. Recent access to commercial 45 nm CMOS Silicon-on-Insulator (SOI) technologies has increased the interest in this technology for rad-hard electronic applications due to the in ...

    SBIR Phase I 2010 Department of DefenseDefense Threat Reduction Agency
  7. High Efficiency, Large-Area, 1550 nm InGaAs Photodiodes

    SBC: VOXTEL, INC.            Topic: N/A

    A back-illuminated planar InGaAs photodiode tested to have 95% quantum effiiency (QE) at 1550 nm, area greater than 1 mm2, low capacitance (125 MHz) will be improved. Although the existing Phase I device exhibited bulk material dark current generation better than commercially available devices, the sidewall-generated dark current was found to dominate the noise equiva ...

    SBIR Phase II 2010 Department of CommerceNational Institute of Standards and Technology
  8. Mill Trials of a Novel Formaldehyde-Free Soy-Based Wood Adhesive for Making Plywood

    SBC: Lao K LLC            Topic: TopicA

    Interior wood composite panels are widely used for furniture, bookshelves, kitchen cabinets, and flooring, and are predominately made with carcinogenic urea-formaldehyde (UF) resin. A new formaldehyde-free, environmentally friendly wood adhesive that mainly consists of abundant, renewable and readily available soybean flour and a novel curing agent have been developed in a laboratory. The novel cu ...

    SBIR Phase I 2010 Environmental Protection Agency
  9. Enhanced Ethanol Diesel Blends for Emission Reduction

    SBC: COMPACT MEMBRANE SYSTEMS, INC.            Topic: N/A

    New engine diesel pollution is addressed in the EPA Clean Diesel Truck/Bus and low sulfur diesel rule and non-road diesel rule. Unfortunately, slow fleet turnover with extend full implementation. EPA is interested in both retrofit technologies that reduce emissions (particulate matter, volatile organic pollutants, NOx) from diesel sources and also interested in new bio-diesel implementation tech ...

    SBIR Phase I 2006 Environmental Protection Agency
  10. HIGH EFFICIENCY COMPACT MODELING OF RADIATION EFFECTS

    SBC: Lynguent, Inc.            Topic: DTRA05001

    The objective of this research is to develop beta versions of tools for automatically migrating radiation effects predicted in TCAD level tools to compact modeling tools. This transition will enable compact models that possess radiation effects to be quickly generated, which can then be used in circuit design activity. This approach is a substantial improvement over the current ad hoc approaches. ...

    SBIR Phase II 2006 Department of DefenseDefense Threat Reduction Agency
US Flag An Official Website of the United States Government