Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY19 is not expected to be complete until June, 2020.

  1. High Efficiency, Large-Area, 1550 nm InGaAs Photodiodes

    SBC: VOXTEL, INC.            Topic: N/A

    A back-illuminated planar InGaAs photodiode tested to have 95% quantum effiiency (QE) at 1550 nm, area greater than 1 mm2, low capacitance (<23 pF), and high bandwidth (>125 MHz) will be improved. Although the existing Phase I device exhibited bulk material dark current generation better than commercially available devices, the sidewall-generated dark current was found to dominate the noise ...

    SBIR Phase II 2010 Department of CommerceNational Institute of Standards and Technology
  2. A Multi-Representation Architecture for STEP AP210-based PCB Stackup Design and Warpage Analysis

    SBC: INTERCAX, LLC            Topic: N/A

    This effort creates foundations for highly automated simulation tools that predict warpage in printed circuit boards and assemblies (PCAs/PCBs) and chip packages. Our technique, MHS, provides core capabilities to automate warpage and other problems that were impractical until now. MHS extends a multi-representation approach the PI first conceived at Georgia Tech for CAD-CAE interoperability. This ...

    SBIR Phase II 2006 Department of CommerceNational Institute of Standards and Technology
  3. Radiation Fault Analysis for 45 Nanometer CMOS-SOI VLSI Circuits

    SBC: Lynguent, Inc.            Topic: DTRA092001

    State of the art Radiation Hardened by Design (RHBD) techniques must scale down in feature size for radiation effects in 45 nm processes, and also scale up in complexity to support radiation fault analysis of VLSI circuits. Recent access to commercial 45 nm CMOS Silicon-on-Insulator (SOI) technologies has increased the interest in this technology for rad-hard electronic applications due to the in ...

    SBIR Phase I 2010 Department of DefenseDefense Threat Reduction Agency
  4. HIGH EFFICIENCY COMPACT MODELING OF RADIATION EFFECTS

    SBC: Lynguent, Inc.            Topic: DTRA05001

    The objective of this research is to develop beta versions of tools for automatically migrating radiation effects predicted in TCAD level tools to compact modeling tools. This transition will enable compact models that possess radiation effects to be quickly generated, which can then be used in circuit design activity. This approach is a substantial improvement over the current ad hoc approaches. ...

    SBIR Phase II 2006 Department of DefenseDefense Threat Reduction Agency
  5. Conformal Appliqué Antennas for Unmanned Aerial Vehicles and Aircraft

    SBC: Wang Electro-Opto Corporation            Topic: SOCOM06002

    This is an SBIR Phase-I proposal, under SOCOM Topic 06-002, “Conformal Appliqué Antennas for Unmanned Aerial Vehicles and Aircraft.” A definite need exists to develop a family of appliqué antennas to be conformally mounted on various UAVs and manned aircraft for broadcast of PSYOPS messages at frequencies throughout the FM (87.5-108 MHz) and TV (174-230 MHz and 470-806 MHz) bands. To develop ...

    SBIR Phase I 2006 Department of DefenseSpecial Operations Command
US Flag An Official Website of the United States Government