Award Data

State of the art Radiation Hardened by Design (RHBD) techniques must scale down in feature size for radiation effects in 45 nm processes, and also scale up in complexity to support radiation fault analysis of VLSI circuits. Recent access to commercial 45 nm CMOS Silicon-on-Insulator (SOI) technologies has increased the interest in this technology for rad-hard electronic applications due to the in ...

A back-illuminated planar InGaAs photodiode tested to have 95% quantum effiiency (QE) at 1550 nm, area greater than 1 mm2, low capacitance (125 MHz) will be improved. Although the existing Phase I device exhibited bulk material dark current generation better than commercially available devices, the sidewall-generated dark current was found to dominate the noise equiva ...

Stirling Technology Company (STC) has developed several Free-Piston Stirling Engine (FPSE) generators with outputs ranging from 10 W to 3 kW. These engines are very quiet, adaptable to virtually any fuel, and can run continuously. However, existing units are relatively heavy. STC proposes to leverage over 2 decades of development into a Special Operations Power System (SOPS) that directly addresse ...

The objective of this research is prove the feasibility of automatically migrating radiation effects predicted in TCAD level tools to compact modeling tools. This transition will enable compact models that possess radiation effects to be quickly generated, which can then be used in circuit design activity. This "model-in-a-day" approach is a substantial improvement over the current ad hoc approach ...

The objective of this research is to develop beta versions of tools for automatically migrating radiation effects predicted in TCAD level tools to compact modeling tools. This transition will enable compact models that possess radiation effects to be quickly generated, which can then be used in circuit design activity. This approach is a substantial improvement over the current ad hoc approaches. ...

Orora Design Technologies, teaming up ATK Mission Research and Boeing Solid-State Electronics, with the support from Oregon State University and Vanderbilt University, proposes to develop innovative mixed-mode and mixed-level simulation capacities for combined simulation of radiation and electrical performance to speed up simulation in radiation hard designs of VLSI circuits. The ultimate goal is ...

In this SBIR proposal, Orora Design Technologies, teaming up with Vanderbilt University and Oregon State University, and with the support from Boeing Solid-State Electronics, proposes to develop innovative mixed-mode (physics and device) and mixed-level(circuit and behavioral) simulation capacities for combined simulation of radiation and electrical performance to speed up simulation in rad hard d ...

An unconventional, continuous, and flexible manufacturing process is proposed for the production of sodium iodide detectors. The steps of crystal growing and substantially simplified detector machining are integrated into one streamline process based on proven techniques with minimal capital investment. This new production process will drastically reduce the manufacturing cost. A leading commerc ...