Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY19 is not expected to be complete until June, 2020.

  1. Construction of a Force Probe for Characterization of Microscale Features

    SBC: INSITUTEC, INC.            Topic: N/A

    The Phase 2 objective is to provide NIST with a modular gauge head unit equipped with InsituTec's standing wave probe technology. The complete gauge head unit will be retrofitted to the NIST M48 which is one of the most precise measuring machines in the world. This unit will enable NIST to achieve the agency's program goal in dimensional metrology which is to provide microscale measurement capacit ...

    SBIR Phase II 2006 Department of CommerceNational Institute of Standards and Technology
  2. High Quantum Efficiency Fast Detectors for Readout of Scintillators for Gamma Ray Detection

    SBC: VOXTEL, INC.            Topic: HSB062007

    High quantum efficiency (QE), fast (

    SBIR Phase I 2006 Department of Homeland Security
  3. Electrostatic Precipitation for High Efficient Aerosol Collection into Low Analysis Volumes

    SBC: Sceptor Industries, Inc.            Topic: N/A

    New sampling methods are now available and offer greater sample collection efficiency, smaller sample volumes and significantly reduced power consumption in a much more compact design. Technologies such as electrostatic precipitation (EP) have demonstrated over 90% collection efficiency for particles in the 1 to 10 micron size range. EP collectors can be made very small and compact and require les ...

    SBIR Phase I 2006 Department of Homeland Security
  4. Tool Condition Monitoring and Diagnostics

    SBC: VulcanCraft            Topic: N/A

    A smart machine tool must be able to monitor its condition and report problems. Every CNC machine should provide an alarm for tool condition problems, including tool wear, much as every automobile has a low oil indicator. Tool wear is particularly important for unattended machining as a worn tool can ruin a part. All current tool condition systems operate "blind" without direct information on curr ...

    SBIR Phase I 2003 Department of CommerceNational Institute of Standards and Technology
US Flag An Official Website of the United States Government