You are here
Award Data
The Award database is continually updated throughout the year. As a result, data for FY24 is not expected to be complete until March, 2025.
Download all SBIR.gov award data either with award abstracts (290MB)
or without award abstracts (65MB).
A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.
The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.
-
Integrally 3D Woven/3D Braided Composite Joining Elements For Ship Construction
SBC: 3TEX, Inc. Topic: N04093During Phase I, 3TEX designed universal, one-piece, 3D woven fiber preforms which can be used as either a “Butt” (H) joint or as a “P” joint as needed. Composite joints were fabricated and tested, demonstrating the benefit of the integral nature of the 3D preforms. 3D stress/strain and crack propagation analysis of composite Π-joint was performed using 3D MOSAIC code. 3D displacement, st ...
SBIR Phase II 2006 Department of DefenseNavy -
3-D Fiber Reinforced, Thermally Conductive Rotor Sheaths
SBC: 3TEX, Inc. Topic: N06T013Military helicopters rotors contend with rain, ice, sand, and flying debris. To prevent damage to the expensive blade protective sheaths or coatings are applied to the leading edge of the rotor blades. A 3-D woven composite sheath with high thermal conductivity fibers running through the thickness can offer the best qualities of both metal sheaths and elastomer coatings. Infused with an elastom ...
STTR Phase I 2006 Department of DefenseNavy -
Improved Miller Fasteners Based on 3-D Braided Preforms
SBC: 3TEX, Inc. Topic: N06033Miller Fasteners made from 2-D laminates represent the state of the art in joining CMC panels to metal frames. Despite its success, the extant Miller fastener design is limited by its construction from a laminate of 2-D fabric. The resultant fastener part has poor interlaminar shear strength, and its manufacture and application entails high machining costs and high material scrap rates. 3TEX, i ...
SBIR Phase I 2006 Department of DefenseNavy -
A CAD Tool for Rapid analysis of Repairs
SBC: ADVANCED STRUCTURAL TECHNOLOGY, INC. Topic: N06005The objective of this project is to develop and validate a CAD tool for the rapid design of mechanically fastened repairs, bonded repairs, and hybrid repairs involving both adhesive bonding and mechanical fasteners. To allow use by non-specialists, the CAD tool will replace the current process of manual construction of joint finite element models with CAD tinker toy assembly using parametric par ...
SBIR Phase I 2006 Department of DefenseNavy -
Network Visualization and Statistical Analysis Toolkit
SBC: ALIDADE, INC. Topic: OSD05NC8The overall objective of this effort is to address a nagging void in the study of Information Age Warfare: there is no coherent set of tools that military analysts can use to visualize, measure, understand and asses networked military systems. While there has been a great deal of effort expended to develop tools in academia (and to a limited extent for commercial business), these products tend to ...
SBIR Phase I 2006 Department of DefenseNavy -
Waterborne Transport Modeling Capability
SBC: APPLIED SCIENCE ASSOC. Topic: DTRA05013The proposed Phase II project is to provide an advanced operational waterborne transport modeling capability of chemical agents within four-dimensional marine and fresh water environments. Based upon the findings of Phase I, we propose to further enhance the operational capabilities of ASA’s Waterborne Chemical Transport Model, relative to weaponized chemical agents, by developing comprehensive ...
SBIR Phase II 2006 Department of DefenseDefense Threat Reduction Agency -
Pier-Side, Bow Sonar Calibration Methodology for Wave Piercing Hull Forms
SBC: Btech Acoustics, LLC Topic: N06139Existing near-field calibration methods for cylindrical MF and HF bow arrays are not easily applied to combatant ships with complex hull forms. The objective of this proposed project is to develop and deliver a cost effective in-situ system for providing sonar transducer acoustic calibration and quality monitoring. The output is a sonar element calibration or verification that will be fed into an ...
SBIR Phase I 2006 Department of DefenseNavy -
Expendable Electro-Optic Infrared Camera System
SBC: CLOUD CAP TECHNOLOGY Topic: N05138Cloud Cap Technology is proposing to develop a stabilized pan tilt zoom camera gimbal system for the Coyote sonobuoy tube launched UAV. Cloud Cap is the maker of the Piccolo autopilot, which is used in many UAV systems, including the prototype of the Coyote. In the spring of 2006 Cloud Cap will introduce a new product, the TASE stabilized pan tilt zoom camera system for small UAVs. TASE is almo ...
SBIR Phase I 2006 Department of DefenseNavy -
Near-infrared Optical Biosensor for Brain Injury Evaluation
SBC: Electrical Geodesics, Inc. Topic: OSD04DH4Based on direction from Dr. Amy Kru
SBIR Phase II 2006 Department of DefenseNavy -
Enhanced Realtime Millimeter Wave Imaging Using Hardware Acceleration
SBC: EM PHOTONICS INC Topic: N06079While the need for effective millimeter wave (mmW) imaging systems is clear, there remains a significant gap in the technology needed to realize it, namely the ability to process and enhance mmW imagery in a real-time manner. This is particularly important because raw mmW images appear very fuzzy, are color mapped, and have regions of intensity that are not normally associated with visible and IR ...
SBIR Phase I 2006 Department of DefenseNavy