Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY19 is not expected to be complete until June, 2020.

  1. Construction of a Force Probe for Characterization of Microscale Features

    SBC: INSITUTEC, INC.            Topic: N/A

    The Phase 2 objective is to provide NIST with a modular gauge head unit equipped with InsituTec's standing wave probe technology. The complete gauge head unit will be retrofitted to the NIST M48 which is one of the most precise measuring machines in the world. This unit will enable NIST to achieve the agency's program goal in dimensional metrology which is to provide microscale measurement capacit ...

    SBIR Phase II 2006 Department of CommerceNational Institute of Standards and Technology
  2. Universal Longwire Antenna Module for Unmanned Aerial Vehicles and Aircraft

    SBC: Sciperio, Inc.            Topic: SOCOM06003

    A longwire antenna module is proposed, incorporating a length reduction technique that yields 25-75% length reduction with minimal impact on gain. A resonant monopole antenna operating at 535kHz is approximately 440ft long; length reduction techniques will reduce this to between 69ft and 134ft depending upon the desired gain. A shorter/lighter longwire antenna will allow the aircraft to be more ...

    SBIR Phase I 2006 Department of DefenseSpecial Operations Command
  3. Conformal Appliqué Antennas for Unmanned Aerial Vehicles and Aircraft

    SBC: Sciperio, Inc.            Topic: SOCOM06002

    An antenna system is proposed for the purpose of FM, TV-VHF, and TV-UHF PSYPOS broadcast applications. The antenna system incorporates a radiating structure that is small, light weight, and conformal. A circularly polarized beam is broadcast from an aircraft towards nadir, illuminating the region below the craft with a horizontally-polarized signal, yielding polarizations pointing in both the No ...

    SBIR Phase I 2006 Department of DefenseSpecial Operations Command
  4. Tool Condition Monitoring and Diagnostics

    SBC: VulcanCraft            Topic: N/A

    A smart machine tool must be able to monitor its condition and report problems. Every CNC machine should provide an alarm for tool condition problems, including tool wear, much as every automobile has a low oil indicator. Tool wear is particularly important for unattended machining as a worn tool can ruin a part. All current tool condition systems operate "blind" without direct information on curr ...

    SBIR Phase I 2003 Department of CommerceNational Institute of Standards and Technology
  5. SOF Life Support Monitor

    SBC: Nomadics, Inc.            Topic: N/A

    Nomadics will undertake the development of a reduced footprint life support monitor for use in far-forward battle environments. Existing systems are bulky and weight constrained causing their ineffectiveness in scenarios where the warfighter is woundedand requires acute medical attention in a timely manner. The proposed system will rely on advancements being made to acute care medical sensors th ...

    SBIR Phase I 2003 Department of DefenseSpecial Operations Command
US Flag An Official Website of the United States Government