You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY24 is not expected to be complete until March, 2025.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.

  1. Improved Tactical Airborne Gimbal System

    SBC: IJK CONTROLS, LLC            Topic: SOCOM15004

    The proposed Improved Tactical Airborne Gimbal System (ITAGS) provides airborne imaging capability from a lightweight 15" ball gimbal. The imaging performance achieved was previously only available with larger gimbals. IJK Controls innovative gimbal mechanism and accompanying stabilization controller are tightly integrated with best-in-class optics and detectors.

    SBIR Phase I 2015 Department of DefenseSpecial Operations Command
  2. Collapsible Stabilization Devices as Broad-Spectrum Force Multipliers

    SBC: LYNNTECH INC.            Topic: SOCOM15005

    The modern operator is expected to perform an increasingly diverse set of tasks; the associated growth in basic and mission-specific loads places a burden on personnel, reducing agility and compromising combat effectiveness. SOCOM seeks a lightweight, compact stabilization solution for weapons, optics, and laser target designators. An ideal stabilization solution would permit special operators to ...

    SBIR Phase I 2015 Department of DefenseSpecial Operations Command
  3. Small Lightweight Concealable Stabilization Device

    SBC: TEXAS RESEARCH INSTITUTE , AUSTIN, INC.            Topic: SOCOM15005

    U.S. SOCOM requires small, lightweight, concealable stabilization devices for target designators, cameras, and other imagers. A fieldable solution must be rugged, fold into a very small form factor, and weigh less than one pound. Joint Tactical Air Controller (JTAC) missions have experienced reduced targeting capabilities as current tripods are often omitted from mission equipment due to excessi ...

    SBIR Phase I 2015 Department of DefenseSpecial Operations Command
  4. A Verifier for Multicore C11 or C++11 Code

    SBC: The Formula Factory            Topic: 9030177R

    Galois will build a practical, efficient, modular, deductive code verifier and verification methodology for multithread C11 software. The verifier will take code written to the C11 standard, suitably annotated with function contracts, assertions, program/data invariants, ghost data/code, and any platform-specific assumptions beyond those guaranteed by the standard, and will prove that the code mee ...

    SBIR Phase I 2015 Department of CommerceNational Institute of Standards and Technology
  5. Construction of a Force Probe for Characterization of Microscale Features

    SBC: INSITUTEC, INC.            Topic: N/A

    The Phase 2 objective is to provide NIST with a modular gauge head unit equipped with InsituTec's standing wave probe technology. The complete gauge head unit will be retrofitted to the NIST M48 which is one of the most precise measuring machines in the world. This unit will enable NIST to achieve the agency's program goal in dimensional metrology which is to provide microscale measurement capacit ...

    SBIR Phase II 2006 Department of CommerceNational Institute of Standards and Technology
  6. Distributed Automatic Reconfigurable Transponder (DART)

    SBC: WILLIAMSRDM, INC.            Topic: N/A

    Williams-Pyro, Inc. (WPI) has designed and successfully demonstrated a proof-of-concept of the Distributed Automatic Reconfigurable Transponder (DART) that will be capable of achieving distributed multi-nodal voice/data communication for fire fighters. In Phase 2 we will focus on developing a fully functional system that reduces communication failure while maintaining a robust and flexible system. ...

    SBIR Phase II 2006 Department of CommerceNational Institute of Standards and Technology
  7. Miniature Netted Sensors

    SBC: WILLIAMSRDM, INC.            Topic: SOCOM06015

    Williams-Pyro proposes to develop an AccuTag Miniature Surveillance and Tracking System (Accu-MiSTS). Accu-MiSTS employs cluster management techniques and ad-hoc networking to provide a readily scalable architecture with which to perform comprehensive surveillance. A cluster is comprised of one supernode and up to 65,536 nodes, all of which are within the communication range of at least one other ...

    SBIR Phase I 2006 Department of DefenseSpecial Operations Command
  8. Advanced Tools for Process Specification Language

    SBC: KNOWLEDGE BASED SYSTEMS INC            Topic: N/A

    This project will (i) extend and harden the PSL Editor and the Ontology-Driven XSLT Generator (ODXG) tools and (ii) extend the process description syntax (PDS) derived from the PSL for both KIF and XML/RDF formats. In addition, we will extend the PSL metatheoretical framework to support the PDS and the PSL tools by providing PSL extensions to support calendars and activity specialization, and by d ...

    SBIR Phase II 2003 Department of CommerceNational Institute of Standards and Technology
  9. PSL-based Process Knowledge Integration and Management Framework

    SBC: KNOWLEDGE BASED SYSTEMS INC            Topic: N/A

    We propose to develop a robust framework, called the Process Knowledge Integration and Management Framework (PKIMF), to support the complete lifecycle of enterprise process knowledge that natively use the Process Specification Language (PSL). PKIMF uses a dashboard approach to design, analyze, integrate, exchange, and manage process knowledge. Its features and capabilities include the use of a pro ...

    SBIR Phase I 2003 Department of CommerceNational Institute of Standards and Technology
  10. Tool Condition Monitoring and Diagnostics

    SBC: VulcanCraft            Topic: N/A

    A smart machine tool must be able to monitor its condition and report problems. Every CNC machine should provide an alarm for tool condition problems, including tool wear, much as every automobile has a low oil indicator. Tool wear is particularly important for unattended machining as a worn tool can ruin a part. All current tool condition systems operate "blind" without direct information on curr ...

    SBIR Phase I 2003 Department of CommerceNational Institute of Standards and Technology
US Flag An Official Website of the United States Government