Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY19 is not expected to be complete until June, 2020.

  1. Construction of a Force Probe for Characterization of Microscale Features

    SBC: INSITUTEC, INC.            Topic: N/A

    The Phase 2 objective is to provide NIST with a modular gauge head unit equipped with InsituTec's standing wave probe technology. The complete gauge head unit will be retrofitted to the NIST M48 which is one of the most precise measuring machines in the world. This unit will enable NIST to achieve the agency's program goal in dimensional metrology which is to provide microscale measurement capacit ...

    SBIR Phase II 2006 Department of CommerceNational Institute of Standards and Technology
  2. SOF Life Support Monitor

    SBC: EXTREME ENDEAVORS AND CONSULTING, LLC            Topic: N/A

    Special Operations Command has divided patient care into three phases, evacuation from the hazardous region, triage and transport, and hospital care. A device is required for Phase Two that can sample, monitor and display vital signs, log the parametersin memory for up to twenty-four hours and download vital sign information once the patient has arrived at the medical facility. This system will ...

    SBIR Phase I 2003 Department of DefenseSpecial Operations Command
  3. Tactical Biometric Registration and Recognition Suite

    SBC: AZIMUTH, INC            Topic: SOCOM06004

    Historically, biometric collection systems have been designed for fixed Law Enforcement office applications. Their limitations stem from the fact that they were designed for specific hardware collection sensors optimized for a specific application. To a large extent the software is proprietary to a single vendor’s sensor suite and not designed to accept international character sets. Current p ...

    SBIR Phase I 2006 Department of DefenseSpecial Operations Command
  4. Tool Condition Monitoring and Diagnostics

    SBC: VulcanCraft            Topic: N/A

    A smart machine tool must be able to monitor its condition and report problems. Every CNC machine should provide an alarm for tool condition problems, including tool wear, much as every automobile has a low oil indicator. Tool wear is particularly important for unattended machining as a worn tool can ruin a part. All current tool condition systems operate "blind" without direct information on curr ...

    SBIR Phase I 2003 Department of CommerceNational Institute of Standards and Technology
US Flag An Official Website of the United States Government