Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY19 is not expected to be complete until June, 2020.

  1. Construction of a Force Probe for Characterization of Microscale Features

    SBC: INSITUTEC, INC.            Topic: N/A

    The Phase 2 objective is to provide NIST with a modular gauge head unit equipped with InsituTec's standing wave probe technology. The complete gauge head unit will be retrofitted to the NIST M48 which is one of the most precise measuring machines in the world. This unit will enable NIST to achieve the agency's program goal in dimensional metrology which is to provide microscale measurement capacit ...

    SBIR Phase II 2006 Department of CommerceNational Institute of Standards and Technology
  2. Super-Precision Capacitance Bridge

    SBC: Andeen-Hagerling, Inc.            Topic: N/A

    NIST desires to develop a standard of pressure in the range 0.3 MPa to 10 MPa based on measurements of the dielectric constants of gaseous helium and argon. This requires capacitance measurements having a better linearity than can be made with any currently available product. It is proposed that the design of the currently most precise commercial capacitance bridge be modified to improve its linea ...

    SBIR Phase II 2004 Department of CommerceNational Institute of Standards and Technology
  3. SMART Life Science Laboratory Solution

    SBC: Entara Technology Group, LLC            Topic: N/A

    A SMART Life Science prototype that facilitates the management of instrumentation data has far reaching implications. As much as the benefit is to an individual scientist, the greater impact affects the entire economy by facilitating the rapid launching of new scientific discoveries that cure disease and product new economic channels for firms. By improving process efficiencies in R&D organization ...

    SBIR Phase II 2004 Department of CommerceNational Institute of Standards and Technology
  4. SOF Tactical Repeater

    SBC: NOVA ENGINEERING, INC.            Topic: SOCOM04006

    Special Operations Forces face a variety of scenarios that limit communications. Blockage by urban structures, urban and rural terrain obstacles, and a desire for over-the-horizon communication dictate the need for a tactical repeater. The proposed research will analyze candidate repeater architectures. Emphasis will be placed on cost, size, weight, power, functionality, time-to-market, ruggedn ...

    SBIR Phase I 2004 Department of DefenseSpecial Operations Command
  5. Optically clear multi-layered protective window/sensor film for use on rotary wing aircraft

    SBC: UNITED PROTECTIVE TECHNOLOGIES, LLC            Topic: SOCOM04002

    Since the inception of windscreens on aircraft, the effects of erosion on the transparent materials utilized for this application has been problematic. With the development of faster aircraft, Night Vision Goggles and various sensors which utilize electromagnetic waves in the visible and IR ranges this problem has been intensified. The team at United Protective Technologies, propose to provide dat ...

    SBIR Phase I 2004 Department of DefenseSpecial Operations Command
  6. Super-Precision Capacitance Bridge

    SBC: Andeen-Hagerling, Inc.            Topic: N/A

    NIST desires to develop a standard of pressure in the range of 0.3Mpa to 10 Mpa based on measurements of the dielectric constants of gaseous helium and argon. This requires capacitance measurements having a better linearity than can be made with any currently available product. It is proposed that the design of what is currently the most precise commercial capacitance bridge be modified to improve ...

    SBIR Phase I 2003 Department of CommerceNational Institute of Standards and Technology
  7. Smart Life Science Laboratory Solution

    SBC: Entara Technology Group, LLC            Topic: N/A

    A SMART Life Science prototype that facilitates the management of instrumentation data has far reaching implications. As much as the benefit is to an individual scientist, the greater impact affects the entire economy by facilitating the rapid launching of new scientific discoveries that cure disease and produce new economic channels for firms. By improving process efficiencies in R&D organization ...

    SBIR Phase I 2003 Department of CommerceNational Institute of Standards and Technology
  8. Tool Condition Monitoring and Diagnostics

    SBC: VulcanCraft            Topic: N/A

    A smart machine tool must be able to monitor its condition and report problems. Every CNC machine should provide an alarm for tool condition problems, including tool wear, much as every automobile has a low oil indicator. Tool wear is particularly important for unattended machining as a worn tool can ruin a part. All current tool condition systems operate "blind" without direct information on curr ...

    SBIR Phase I 2003 Department of CommerceNational Institute of Standards and Technology
  9. Remote Runway Survey System to Measure Soil Type, Load Bearing Capacity, Slope and Grades

    SBC: ZYBRON OPTICAL ELECTRONICS, INC.            Topic: N/A

    Traditionally the Air Force Special Operations Forces (AFSOF) physically measures assault zone characteristics such as physical dimensions, magnetic orientation, coordinates, obstacles, elevation, weight-bearing capacity of the soil, soil composition,surface tolerances, clearances, and roughness, terminal navigation aid suitability, etc. It is labor intensive and the operator would be exposed to t ...

    SBIR Phase II 2003 Department of DefenseSpecial Operations Command
US Flag An Official Website of the United States Government