Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY19 is not expected to be complete until June, 2020.

  1. Deep Submergence Rated Flexible Hoses and Piping System Connectors

    SBC: MEI-CHARLTON, INC.            Topic: SOCOM08002

    The objective of this proposal is to demonstrate the feasibility of developing flex hoses for hydraulic and other piping system interfaces that can withstand high pressure environments, hydrodynamic, and other forces unique to deep submergence system operating environments. This hose and connecter system coined FlexiHOSE© proposed by MEI-Charlton, Inc. (MEIC) will meet the need of operating under ...

    SBIR Phase I 2008 Department of DefenseSpecial Operations Command
  2. Improved Silicon Drift Detector Coincidence Rejection for Digital Pulse Processors

    SBC: 4pi Analysis, Inc.            Topic: N/A

    The recent emergence of the Silicon Drift detector (SDD), for use in Energy Dispersive x-ray Spectroscopy (EDS), has made possible x-ray event streams with input count rates in the range of 1-10 Mcps. Modern digital pulse processors are therefore required to run at fast time constants to achieve reasonable throughput; however, this causes significant coincidence artifacts to appear in the spectrum ...

    SBIR Phase I 2008 Department of CommerceNational Institute of Standards and Technology
  3. Construction of a Force Probe for Characterization of Microscale Features

    SBC: INSITUTEC, INC.            Topic: N/A

    The Phase 2 objective is to provide NIST with a modular gauge head unit equipped with InsituTec's standing wave probe technology. The complete gauge head unit will be retrofitted to the NIST M48 which is one of the most precise measuring machines in the world. This unit will enable NIST to achieve the agency's program goal in dimensional metrology which is to provide microscale measurement capacit ...

    SBIR Phase II 2006 Department of CommerceNational Institute of Standards and Technology
  4. RBAC-Based Workflow

    SBC: Virtual Globe, Inc. (Rockwise)            Topic: N/A

    Under this proposal, Virtual Global, Inc. proposes to work with NIST to develop RBAC-BASED WORKFLOW, a workflow system that will use RBAC in a web services model as a form of middleware that can be "packaged" accessed, configured, and reused by integrating with existing trusted RBAC implementations.

    SBIR Phase I 2008 Department of CommerceNational Institute of Standards and Technology
  5. Efficient Low-Dark-Count Detector for Photon Counting

    SBC: VOXTEL, INC.            Topic: N/A

    Voxtel proposes to develop fiber-coupled near-infrared avalanche photodiode (APD) receivers with photon detection efficiency (PDE) and dark count rate (DCR) with more than two orders of magnitude faster maximum count rate (MCR) than Geiger-mode APDs, which are constrained by a fundamental tradeoff between DCR and MCR: if the APD is cooled to reduce DCR, then its dead time must increase to avoid af ...

    SBIR Phase I 2008 Department of CommerceNational Institute of Standards and Technology
  6. Tool Condition Monitoring and Diagnostics

    SBC: VulcanCraft            Topic: N/A

    A smart machine tool must be able to monitor its condition and report problems. Every CNC machine should provide an alarm for tool condition problems, including tool wear, much as every automobile has a low oil indicator. Tool wear is particularly important for unattended machining as a worn tool can ruin a part. All current tool condition systems operate "blind" without direct information on curr ...

    SBIR Phase I 2003 Department of CommerceNational Institute of Standards and Technology
US Flag An Official Website of the United States Government