You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY24 is not expected to be complete until March, 2025.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.

  1. Fabrication of Advanced Waveguide Structures for Efficient Violet and Near-UV Generation

    SBC: ADVR, INC.            Topic: N/A

    This SBIR Phase I effort will establish the feasibility of fabricating advanced waveguide structures in potassium titanyl phosphate (KTP) capable of efficiently generating 25 to 40 mW of frequency converted light in the 395 to 480 nm. The key innovation in this effort is to utilize KTP waveguides in a single-pass frequency doubling device to efficiently produce the desired laser wavelengths and po ...

    SBIR Phase I 2009 Department of CommerceNational Institute of Standards and Technology
  2. High Efficiency Up conversion Single-Photon-Detector for 1550 nm Signal

    SBC: ADVR, INC.            Topic: N/A

    This NIST Phase II SBIR effort will two low noise single photon detectors using MgO doped LiNbO3 (LN) periodically poled waveguides and a 980nm (or similar appropriate wavelength) pump to up convert 1550nm photons to 600nm to allow for detection by photomultiplier tube (PMT). The key innovation is using low noise periodically poled waveguides with a long wavelength (1800nm) pump leading to higher ...

    SBIR Phase II 2009 Department of CommerceNational Institute of Standards and Technology
  3. A Novel Microwave Sensor for Non- Destructive Evaluation of Silicon Nitride Bearing Balls

    SBC: ALPHASENSE, INC.            Topic: AF083109

    In this proposal, Alphasense, Inc. details the development of a novel microwave NDE sensor for defect inspections in silicon nitride bearing balls. The key innovations of this proposal include the following: a) the use of the spherical bearing ball as a dielectric resonator, thus enabling us to correlate the resonance characteristics of the bearing ball with various defects; b) the measurements in ...

    SBIR Phase I 2009 Department of DefenseAir Force
  4. Inspection Process Management

    SBC: Aspire Solutions, Inc            Topic: AF083230

    The objective of this proposal is to develop an inspection management tool that standardizes both the inspection process and the inspection data.  The Oklahoma City Air Logistics Center (OC-ALC) current processes are manual, paper based methods that rely heavily on the individuals experience to properly identify the defect and log it.  This research would create a tool that would improve the ins ...

    SBIR Phase I 2009 Department of DefenseAir Force
  5. Photonically-Controlled SiC based Device Technology for Power Electronic Applications

    SBC: Arkansas Power Electronics International, Inc.            Topic: AF083110

    This Small Business Innovation Research Phase I project seeks the development of an optically-triggered silicon carbide based power device technology that will enable the next-generation of EMI/EMP-resistant power electronics systems and ultimately the implementation of advanced concepts such as Fly-by-light (FBL).  To develop the proposed technology Arkansas Power Electronics International, Inc. ...

    SBIR Phase I 2009 Department of DefenseAir Force
  6. Very Low Profile Non-Intrusive Data Acquisition Systems for Turbine High Temperature Bearing Sensors

    SBC: Arkansas Power Electronics International, Inc.            Topic: AF073040

    The terminal objective of this Phase II work will be the development of a harsh environment non-intrusive self-powered wireless sensor-transmitter capable of operation to 225 °C and survivable to 300 °C. The developed wireless sensor transmitter will acquire bearing parametric data, such as temperature and vibration information, and wirelessly transmit that data to an engine PHM system. The el ...

    SBIR Phase II 2009 Department of DefenseAir Force
  7. A Compact, Multimode LADAR For Target Identification Based Upon Joint Optimization of Optical and Computational Resources

    SBC: Bridger Photonics, Inc.            Topic: AF083149

    Bridger Photonics proposes to prove the feasibility of an innovative method for multi-mode target identification. To achieve this system, the team will combine the most advanced ultra-high-resolution FM-CW LADAR unit in existence with state-of-the-art feature-specific computational imaging concepts. This marriage will enable the team to identify and realize the truly optimal solution to the Air ...

    SBIR Phase I 2009 Department of DefenseAir Force
  8. High Performance Low Integration Cost Magnetometer System

    SBC: LEE, JENNA            Topic: AF083218

    An innovative data collection and analysis approach is proposed to enable body mount magnetometers for space application. In order to achieve high accurate magnetic field measurement in space, the magnetometer has to be located in a âmagnetically cleanâ place, where the magnetic field from spacecraft is negligible. Usually, the magnetometers are placed on deployable booms, so that the field sens ...

    SBIR Phase I 2009 Department of DefenseAir Force
  9. Small Unpiloted Aircraft System (SUAS) Auto-tracking of Moving and Stationary Targets

    SBC: SOLUTION ENGINEERING            Topic: AF083129

    Solution Engineering, Inc. (SEI) proposes to develop and demonstrate a prototype real time tracking system that supports robust multiple target tracking in an urban environment.  The approach will focus on increasing the robustness of the core feature tracking algorithms, utilizing target invariant characteristics to extend the ability to track, coast, and reacquire targets.  In addition higher ...

    SBIR Phase I 2009 Department of DefenseAir Force
  10. Accelerated Development of High-Performance Mo-Si-B-X Alloys via an Approach of Integrating Thermodynamic Modeling with Experimental Study

    SBC: Computherm, LLC            Topic: AF07T003

    The proposed study aims at accelerated development of Mo-Si-B-X (X=Ti, Zr, Hf, Re, Mn) alloys with an optimized balance of properties, via an approach of integrating thermodynamic modeling with experimental study.   On the basis of the Mo-Si-B-X (X=Ti, Zr, Hf) database developed in Phase I, a thermodynamic database of the Mo-Si-B-O-X (X=Ti, Zr, Hf, Re, Mn) system will be developed using the Calp ...

    STTR Phase II 2009 Department of DefenseAir Force
US Flag An Official Website of the United States Government