Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY19 is not expected to be complete until September, 2020.

  1. Dynamic Light Scattering Instrumentation Using Field Programmable Gate Array-based Digital Signal Processing

    SBC: VOXTEL, INC.            Topic: N/A

    An existing low-cost FPGA-based processing platform will be demonstrated with fiber-coupling to single-photon detectors, to perform photon-arrival time stamping with

    SBIR Phase I 2009 Department of CommerceNational Institute of Standards and Technology
  2. High Efficiency, Large-area, 1550 nm InGaAs Photodiodes

    SBC: VOXTEL, INC.            Topic: N/A

    A stable, well characterized InGaAs materials growth and photodetector fabrication process will be used to fabricate matched photodiodes optimized for balanced homodyne detection. The 1-mm-diameter p-i-n photodetectors will be manufactured back-illuminated with a 5-micron absorber, allowing residual light to reflect off the front-side metal to make a double pass through the active layer. Ultra-hig ...

    SBIR Phase I 2009 Department of CommerceNational Institute of Standards and Technology
  3. Efficient Low-Dark-Count Detector for Photon Counting

    SBC: VOXTEL, INC.            Topic: N/A

    Voxtel has demonstrated efficient high-speed photon counting with thresholded linear-mode avalanche photodiode (APD) receivers using multi-gain-stage InGaAs/InAIAs APDs. In contrast to Geiger APDs, thresholded photon-counting linear APD receivers are thought not to suffer afterpulsing, and can support maximum count rates (MCR) up to 2 or 3 orders of magnitude faster than Geiger APDs. However, the ...

    SBIR Phase II 2009 Department of CommerceNational Institute of Standards and Technology
  4. Innovative Real Time Probes for Plastic Bonded Exp

    SBC: ALPHASENSE, INC.            Topic: A09026

    In this proposal, AlphaSense, Inc. proposes to develop an innovative real time probe for online monitoring of plastic bonded explosive manufacturing process. Key innovations of the proposed sensor probe include: a) the use of a white light interferometer (WLI) to form real time images of the particles for accurate particle size measurements, and b) the use of quartz crystal microbalance (QCM) base ...

    SBIR Phase I 2009 Department of DefenseArmy
  5. Greywater Recycling System for Mobile Kitchens and Sanitation Centers

    SBC: Puralytics            Topic: A08185

    UVCleaning Systems will develop a greywater remediation and recycling system for Army kitchen sanitation centers by combining COTS pre-filtration and ultrafiltration technologies, to reliably reduce all greywater contaminant concentrations except BOD to within the requirements of the solicitation, together with a new UVCleaning Systems photocatalytic reactor following the ultrafiltration membrane ...

    SBIR Phase I 2009 Department of DefenseArmy
  6. Nano-Passivation of GaSb/InAs Strained Layer Superlattices Infrared Detector

    SBC: B & W Tek Inc.            Topic: A08103

    Mid-infrared (MWIR, wavelength ~10 micron) imaging has significant importance in military surveillance and target recognition, since human body radiation peaks in MWIR. The GaSb/InAs type-II Strained Layer Superlattice (SLS) MWIR detector has been under intensive investigation recently. While much progress has been made to enhance wavelength coverage, one of the few remaining issues has been its r ...

    SBIR Phase I 2009 Department of DefenseArmy
  7. Low Light Level Silicon-Germanium Nano-BiCMOS Infrared Camera

    SBC: B & W Tek Inc.            Topic: A08100

    Low light level infrared imaging has significant importance in military surveillance and target recognition. The proposed broadband low-light-level nano-BiCMOS camera covers visible and near infrared bands from 400 nm to 1,550 nm wavelengths. With a proven nano-technology, the proposed nano-BiCMOS photo-detector solves this long-standing tradeoff between quantum efficiency and dark current by in- ...

    SBIR Phase I 2009 Department of DefenseArmy
  8. Novel Energetic Polymers

    SBC: Orbital Technologies Corporation            Topic: A08036

    ORBITEC proposes to develop novel energetic polymers based on the 1,2,3-triazole linkage to replace conventional binders commonly used in solid propellants. The proposed polymers will enjoy higher enthalpy, higher density, greater tolerance for impurities while curing, desirable mechanical and processing properties, and greater range of compatibility with other propellant ingredients compared to ...

    SBIR Phase I 2009 Department of DefenseArmy
  9. High-flux electronically generated thermal neutron source for radiographic applications

    SBC: Phoenix LLC            Topic: N/A

    Neutron radiography offers the potential to inspect small features located inside of materials that would be highly shielding to x-rays. In addition, the use of neutrons allows the radiographer to view elements in high detail that are nearly invisible to x-rays. Radiographers at the ARDEC have demonstrated that it would be possible to inspect Army munitions on a large scale provided that a neutr ...

    SBIR Phase II 2009 Department of DefenseArmy
  10. Photonics-enabled Radio-Frequency Arbitrary Waveform Generation

    SBC: S2 CORPORATION            Topic: A09056

    We propose to analyze and design prototype hardware, and demonstrate basic capabilities in a Phase I effort, based on coherent accumulation and interference of spectrally shaped waveforms to achieve wideband RF arbitrary waveform generation. The combined specifications include bandwidths of 10-40 GHz, time bandwidth products >>50 given the bandwidth and long time apertures with complete control o ...

    SBIR Phase I 2009 Department of DefenseArmy
US Flag An Official Website of the United States Government