Award Data

This SBIR Phase I effort will establish the feasibility of fabricating advanced waveguide structures in potassium titanyl phosphate (KTP) capable of efficiently generating 25 to 40 mW of frequency converted light in the 395 to 480 nm. The key innovation in this effort is to utilize KTP waveguides in a single-pass frequency doubling device to efficiently produce the desired laser wavelengths and po ...

This NIST Phase II SBIR effort will two low noise single photon detectors using MgO doped LiNbO3 (LN) periodically poled waveguides and a 980nm (or similar appropriate wavelength) pump to up convert 1550nm photons to 600nm to allow for detection by photomultiplier tube (PMT). The key innovation is using low noise periodically poled waveguides with a long wavelength (1800nm) pump leading to higher ...

This project will extend the microchannel resonator to the level of a few attograms, which will allow measurement of individual particles as small as 10 nanometers with unprecedented resolution. The Phase I effort will prove the feasibility of this approach by miniaturizing the MEMS sensors, thereby improving their intrinsic mass sensitivity up to 100-fold; and by simultaneously measuring the sens ...

THE "CROWN DICE" CERAMIC ITEMS WILL BECOME AVAILABLE BY POURING CLAY INTO MOLDINGS , THAN BURNING THEM AT THE KILNS AND PAINTING THEM TO BE READY TO GO FOR THE SHELVES . THE DESIGN IS : BELOW BOX --DICE; ON TOP OF THE BOX ARE JOKER STICKS.

This proposal offers a detailed work plan to conduct the research and development tasks necessary to produce a system composed of software, application servers, PCs, and handheld computers for use by highly-mobile military personnel to collect and process cultural information, intelligence, and data. Development of the system will be facilitated by our extensive military research and operational e ...

Technology research and development in such areas as next-generation atomic clocks, quantum information processing with trapped ions, and atomic spectroscopy is impeded by the lack of commercially available laser sources that meet the required specifications of wavelength tuning range, output power, frequency-stability and reliability. Arete Associates is developing frequency-stable Optically Pump ...

The purpose of this project is to implement the process for a new method for the measurement of LED performance, but in a form that is low-cost, integrated, and easy-to-use, so that the barrier to entry is as low as is possible.

This proposal explores the feasibility of a communication system based on the modulation of a magnetic field. The principle of mutual induction states that the voltage induced by mutual induction in one inductor is always proportional to the rate of current change in the other inductor. If one inductor is in the transmitter, and the other inductor is in the receiver, the induced voltage in the r ...

The characterization of biologically relevant polymetric materials is a major focus of the bioinstrumentation industry. Of particular interest is the rapid, direct sequencing of DNA through a nanopore as well as the characterization of other biopolymers. Although progress has been made with nanopore sequencing, some fundamental instrumental and system issues have so far kept the method from realiz ...

The proposed program will theoretically and experimentally assess and identify innovative technologies, and advanced materials that emit an effective infra-red (IR) countermeasure in the desired IR spectrum range while minimizing detectable signatures in the visible light spectrum. During the research effort, the project team will develop the initial technical design and supporting documentation f ...