You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY24 is not expected to be complete until March, 2025.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.

  1. Fabrication of Advanced Waveguide Structures for Efficient Violet and Near-UV Generation

    SBC: ADVR, INC.            Topic: N/A

    This SBIR Phase I effort will establish the feasibility of fabricating advanced waveguide structures in potassium titanyl phosphate (KTP) capable of efficiently generating 25 to 40 mW of frequency converted light in the 395 to 480 nm. The key innovation in this effort is to utilize KTP waveguides in a single-pass frequency doubling device to efficiently produce the desired laser wavelengths and po ...

    SBIR Phase I 2009 Department of CommerceNational Institute of Standards and Technology
  2. High Efficiency Up conversion Single-Photon-Detector for 1550 nm Signal

    SBC: ADVR, INC.            Topic: N/A

    This NIST Phase II SBIR effort will two low noise single photon detectors using MgO doped LiNbO3 (LN) periodically poled waveguides and a 980nm (or similar appropriate wavelength) pump to up convert 1550nm photons to 600nm to allow for detection by photomultiplier tube (PMT). The key innovation is using low noise periodically poled waveguides with a long wavelength (1800nm) pump leading to higher ...

    SBIR Phase II 2009 Department of CommerceNational Institute of Standards and Technology
  3. Fast Curing Modular Composite Patch System for Field Applications

    SBC: CONTINUUM DYNAMICS INC            Topic: SOCOM07002

    SOCOM requires a method to field repair multiple materials as well as to mount armor and related hardware for a variety of tactical purposes with a composite material. To address this need, we propose application of a “Modular UV Patch” (MUVP) system that incorporates ultraviolet curing resin systems and an innovative technique for delivering the UV light through optically leaky fibers that f ...

    SBIR Phase II 2009 Department of DefenseSpecial Operations Command
  4. Low Noise, InGaAs Dual Photodiodes for Precise Timing

    SBC: DISCOVERY SEMICONDUCTORS, INC.            Topic: N/A

    Conversion of highly stable optical clocks into electrical clocks through photodetection introduces excess phase noise, thereby degrading the frequency stability. This noise is primarily generated due to the conversion of optical intensity noise into electrical phase noise by photodiode¿s non-linearity, specifically power-to-phase conversion. During Phase I, Discovery developed dual photodiodes h ...

    SBIR Phase II 2009 Department of CommerceNational Institute of Standards and Technology
  5. Low Visibility Decoy Flare

    SBC: GENERAL SCIENCES INC            Topic: SOCOM09002

    Low visibility rotary aircraft decoys are needed to protect vehicles against heat seeking missile attacks without illuminating the target which exposes the aircraft to small arms fire and potentially compromising the mission. The novel approach to this challenge is to produce a decoy which emits only in the bands of interest utilizing techniques such as containment and composition selection to op ...

    SBIR Phase I 2009 Department of DefenseSpecial Operations Command
  6. Programmable Fingerprint Emulator

    SBC: PHT AEROSPACE LLC            Topic: N/A

    This proposal is for the development of a technology apparatus which can dynamically synthesize a mechanical fingerprint pattern, from an electronic image or from a computer-generated artificial pattern, onto a 2-dimensional pliable surface whose surface height is modulated by protrusions in the z-axis direction. When mechanically applied to a fingerprint sensor-under-test, the synthesized modulat ...

    SBIR Phase I 2009 Department of CommerceNational Institute of Standards and Technology
  7. Dynamic Light Scattering Instrumentation Using Field Programmable Gate Array-based Digital Signal Processing

    SBC: VOXTEL, INC.            Topic: N/A

    An existing low-cost FPGA-based processing platform will be demonstrated with fiber-coupling to single-photon detectors, to perform photon-arrival time stamping with

    SBIR Phase I 2009 Department of CommerceNational Institute of Standards and Technology
  8. High Efficiency, Large-area, 1550 nm InGaAs Photodiodes

    SBC: VOXTEL, INC.            Topic: N/A

    A stable, well characterized InGaAs materials growth and photodetector fabrication process will be used to fabricate matched photodiodes optimized for balanced homodyne detection. The 1-mm-diameter p-i-n photodetectors will be manufactured back-illuminated with a 5-micron absorber, allowing residual light to reflect off the front-side metal to make a double pass through the active layer. Ultra-hig ...

    SBIR Phase I 2009 Department of CommerceNational Institute of Standards and Technology
  9. Efficient Low-Dark-Count Detector for Photon Counting

    SBC: VOXTEL, INC.            Topic: N/A

    Voxtel has demonstrated efficient high-speed photon counting with thresholded linear-mode avalanche photodiode (APD) receivers using multi-gain-stage InGaAs/InAIAs APDs. In contrast to Geiger APDs, thresholded photon-counting linear APD receivers are thought not to suffer afterpulsing, and can support maximum count rates (MCR) up to 2 or 3 orders of magnitude faster than Geiger APDs. However, the ...

    SBIR Phase II 2009 Department of CommerceNational Institute of Standards and Technology
US Flag An Official Website of the United States Government