Award Data

This SBIR Phase I effort will establish the feasibility of fabricating advanced waveguide structures in potassium titanyl phosphate (KTP) capable of efficiently generating 25 to 40 mW of frequency converted light in the 395 to 480 nm. The key innovation in this effort is to utilize KTP waveguides in a single-pass frequency doubling device to efficiently produce the desired laser wavelengths and po ...

This NIST Phase II SBIR effort will two low noise single photon detectors using MgO doped LiNbO3 (LN) periodically poled waveguides and a 980nm (or similar appropriate wavelength) pump to up convert 1550nm photons to 600nm to allow for detection by photomultiplier tube (PMT). The key innovation is using low noise periodically poled waveguides with a long wavelength (1800nm) pump leading to higher ...

The result of this project will be a fully functional prototype of the Model 8686H Precision Resistance-Ratio AC Bridge. The unit is capable of measuring resistances from 0 to 400 ohms with better than 0.1 uohm resolution and an accuracy of better than +/-0.05ppm. The unit will have advanced features such as a built-in web-browser, USB interface and built-in complex functions. Examples of such com ...

The NIST patented six-degree of freedom micropositioner technology associated with this subtopic has been identified by E M Optomechanical, Inc. (EMOM) as a technology that could be incorporated into the company¿s long-working distance interference microscopes. A key element in these microscopes is a piezo-actuator device, installed in a manual pitch/yaw mount, which translates a small flat mirro ...

Modern supercontinuum (SC) light sources are generated by non-linear interactions between ultrashort laser pulses and optical fibers. These light sources have high brightness and are spatially coherent. Output in near-ultraviolet to near-infrared wavelength ranges has been demonstrated. SC wavelength ranges are constrained by the transmission and dispersion properties of the fibers. Previously, ou ...

The ability to Find, Fix, and Finish enemy combatants is highly desirable to winning wars. The capability to positively identify High Value Targets / High Value Individuals is one method to insure success in any conflict, specifically counterinsurgency. Surgical precision in tracking known terrorists, and the ability to remove them from the battlefield allows for fast and decisive change within ...

Southwest Sciences¿ Phase 2 SBIR project will lead to development of residential fire sensing systems based on recently developed, low cost temperature and optical imaging sensors combined with newly introduced highly miniaturized, micropower CO sensors. Sensor modules will be part of a low power wireless network. Each module will be about ½ the size of a business card, a few mm thick, and w ...

This Small Business Innovation Research Phase II project uses the ¿smart-cut¿ methods to produce high performance and advanced functionality lithium tantalate pyroelectric sensors. Phase I has been devoted to feasibility demonstration of the ¿smart-cut¿ process, preliminary design studies for the advanced pyroelectric detectors and prototype device fabrication and testing. The Phase I ...

A key factor of international efforts to identify and suppress the supply of and demand for nuclear materials, and thereby to deter potential traffickers, is the ability to accurately identify contradicted material and ultimately to trace it back to its origin. Alpha particle spectroscopy is widely used in nuclear forensics to assay trace quantities of sensitive nuclear materials, but the limited ...

An existing low-cost FPGA-based processing platform will be demonstrated with fiber-coupling to single-photon detectors, to perform photon-arrival time stamping with