Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY19 is not expected to be complete until September, 2020.

  1. Absolute Distance Interferometer for Manufacturing Metrology Applications

    SBC: Bridger Photonics, Inc.            Topic: NA

    Bridger Photonics, Inc. proposes to develop an absolute length metrology sensor that will simultaneously provide >1,000 measurements per second, 0.5 m maximum measurement distance. Bridger’s solution is will fill a gap in precision measurement technology for applications that require rapid monitoring of macroscopic distances such as positioning and calibration of surface metrology systems (CMM, ...

    SBIR Phase II 2017 Department of CommerceNational Institute of Standards and Technology
  2. Foreign Like Weapon Production Capability

    SBC: McNally Industries, LLC            Topic: SOCOM172003

    The proposed Phase I effort is to complete a feasibility review of all innovative technology options that can be implemented in Phase II in order to evaluate, reverse engineer, reengineer, design, draft, fabricate, machine, coat, assemble and test facsimiles of foreign like weapons described in the topic announcement. McNally's solution is based on our years of experience in reverse engineering s ...

    SBIR Phase I 2017 Department of DefenseSpecial Operations Command
  3. ATCOM SHARP Box for Real-Time Turbulence Mitigation

    SBC: EM PHOTONICS INC            Topic: NASAA402

    When imaging over long distances, atmospheric turbulence between the camera and subject degrades the collected data limiting the effective resolution, regardless of the quality of the optic and sensor used. This reduction in image quality can have serious impacts on the ability to carry out missions by reducing situational awareness and preventing target identification. EM Photonics has been worki ...

    SBIR Phase II 2017 Department of DefenseSpecial Operations Command
  4. Dynamic Light Scattering Instrumentation Using Field Programmable Gate Array-based Digital Signal Processing

    SBC: VOXTEL, INC.            Topic: N/A

    An existing low-cost FPGA-based processing platform will be demonstrated with fiber-coupling to single-photon detectors, to perform photon-arrival time stamping with

    SBIR Phase I 2009 Department of CommerceNational Institute of Standards and Technology
  5. High Efficiency, Large-area, 1550 nm InGaAs Photodiodes

    SBC: VOXTEL, INC.            Topic: N/A

    A stable, well characterized InGaAs materials growth and photodetector fabrication process will be used to fabricate matched photodiodes optimized for balanced homodyne detection. The 1-mm-diameter p-i-n photodetectors will be manufactured back-illuminated with a 5-micron absorber, allowing residual light to reflect off the front-side metal to make a double pass through the active layer. Ultra-hig ...

    SBIR Phase I 2009 Department of CommerceNational Institute of Standards and Technology
  6. Efficient Low-Dark-Count Detector for Photon Counting

    SBC: VOXTEL, INC.            Topic: N/A

    Voxtel has demonstrated efficient high-speed photon counting with thresholded linear-mode avalanche photodiode (APD) receivers using multi-gain-stage InGaAs/InAIAs APDs. In contrast to Geiger APDs, thresholded photon-counting linear APD receivers are thought not to suffer afterpulsing, and can support maximum count rates (MCR) up to 2 or 3 orders of magnitude faster than Geiger APDs. However, the ...

    SBIR Phase II 2009 Department of CommerceNational Institute of Standards and Technology
  7. Fabrication of Advanced Waveguide Structures for Efficient Violet and Near-UV Generation

    SBC: ADVR, Inc            Topic: N/A

    This SBIR Phase I effort will establish the feasibility of fabricating advanced waveguide structures in potassium titanyl phosphate (KTP) capable of efficiently generating 25 to 40 mW of frequency converted light in the 395 to 480 nm. The key innovation in this effort is to utilize KTP waveguides in a single-pass frequency doubling device to efficiently produce the desired laser wavelengths and po ...

    SBIR Phase I 2009 Department of CommerceNational Institute of Standards and Technology
  8. High Efficiency Up conversion Single-Photon-Detector for 1550 nm Signal

    SBC: ADVR, Inc            Topic: N/A

    This NIST Phase II SBIR effort will two low noise single photon detectors using MgO doped LiNbO3 (LN) periodically poled waveguides and a 980nm (or similar appropriate wavelength) pump to up convert 1550nm photons to 600nm to allow for detection by photomultiplier tube (PMT). The key innovation is using low noise periodically poled waveguides with a long wavelength (1800nm) pump leading to higher ...

    SBIR Phase II 2009 Department of CommerceNational Institute of Standards and Technology
US Flag An Official Website of the United States Government