You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY24 is not expected to be complete until March, 2025.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.

  1. Dynamic Frequency Passive Millimeter-Wave Radiometer Based on Optical Up-Conversion

    SBC: PHASE SENSITIVE INNOVATIONS INC            Topic: 941D

    In the proposed effort, we will leverage this extensive experience and capabilities to realize a frequency agile mmW radiometer that can cover the range of DC-110 GHz and can be scaled to DC-200 GHz under Phase II. Ours is a photonic system that multiplies and up-coverts a low-frequency reference signal onto an optical carrier (laser) using EO modulation, then uses the modulation sidebands to inj ...

    SBIR Phase I 2013 Department of CommerceNational Oceanic and Atmospheric Administration
  2. Development of a Long Term pH and pCO2 Lagrangian Drifter

    SBC: SUNBURST SENSORS, LLC            Topic: 831C

    Quantifying oceanic CO2 uptake and ocean acidification and understanding their impact on global climate and ocean ecology are key goals of NOAA’s climate change research programs. NOAA’s request for Development of a long-term Lagrangian pH and pCO2 drifter (SBIR Subtopic 8.3.1C) aims to address these goals by developing technology that measures both pCO2 and pH that can be widely deployed in t ...

    SBIR Phase II 2013 Department of CommerceNational Oceanic and Atmospheric Administration
  3. Covert Optically-Reporting Threat-Functionalized Nanomaterials

    SBC: VOXTEL, INC.            Topic: DTRA122003

    The Defense Threat Reduction Agency (DTRA) and the U.S. Strategic Command Center for Combating Weapons of Mass Destruction (SCC-WMD) requires transformational materials technology to support the intelligence, surveillance, and reconnaissance (ISR) of personnel and materials associated with weapons of mass destruction (WMD) development, manufacturing, and proliferation. Voxtel, Inc. proposes to fa ...

    SBIR Phase I 2013 Department of DefenseDefense Threat Reduction Agency
  4. An Advanced NDE Approach to Determine the Adhesive Bond Strength

    SBC: RESODYN CORPORATION            Topic: SB123001

    Bonded composite materials offer considerable opportunity to reduce manufacturing cost, improve structural performance, and improve fuel efficiency of aircraft. However, bonded composite aircraft structures continue to be a challenge to manufacture due to the certification requirement to determine the strength of the bonds in the structures - before they are placed into service. Current testing te ...

    SBIR Phase I 2013 Department of DefenseDefense Advanced Research Projects Agency
  5. Fabrication of Advanced Waveguide Structures for Efficient Violet and Near-UV Generation

    SBC: ADVR, INC.            Topic: N/A

    This SBIR Phase I effort will establish the feasibility of fabricating advanced waveguide structures in potassium titanyl phosphate (KTP) capable of efficiently generating 25 to 40 mW of frequency converted light in the 395 to 480 nm. The key innovation in this effort is to utilize KTP waveguides in a single-pass frequency doubling device to efficiently produce the desired laser wavelengths and po ...

    SBIR Phase I 2009 Department of CommerceNational Institute of Standards and Technology
  6. High Efficiency Up conversion Single-Photon-Detector for 1550 nm Signal

    SBC: ADVR, INC.            Topic: N/A

    This NIST Phase II SBIR effort will two low noise single photon detectors using MgO doped LiNbO3 (LN) periodically poled waveguides and a 980nm (or similar appropriate wavelength) pump to up convert 1550nm photons to 600nm to allow for detection by photomultiplier tube (PMT). The key innovation is using low noise periodically poled waveguides with a long wavelength (1800nm) pump leading to higher ...

    SBIR Phase II 2009 Department of CommerceNational Institute of Standards and Technology
  7. Periodically Poled Materials for UV Generation

    SBC: ADVR, INC.            Topic: A09AT008

    Army quantum information researchers have an immediate need for improved stable, narrowband violet and UV laser sources with 10–100 mW output and 10 MHz–10 GHz tuning. These sources are required for numerous ion and atom qubits functions including photoionization, Doppler cooling, state initialization, and detection. The cost and complexity of currently available UV lasers hampers current ef ...

    STTR Phase I 2009 Department of DefenseDefense Advanced Research Projects Agency
  8. GPU-Based CFD Analysis for Modeling Complex UAV Flight Scenarios

    SBC: EM PHOTONICS INC            Topic: SB082024

    Recent advances in computing have produced special-purpose hardware comprised of vector processors streamlined for high-performance computations. Development of these devices, such as graphics processing units (GPUs) and the Cell Broadband Engine (Cell Processor), has been advanced by the videogame industry. In an effort to increase flexibility and enter new markets, vendors have increased platf ...

    SBIR Phase I 2009 Department of DefenseDefense Advanced Research Projects Agency
  9. Automated Wide-Area Network Configuration from High-Level Specifications

    SBC: GALOIS, INC.            Topic: ST061002

    Wide-area networks are essential to productivity in commercial enterprises and military organizations. Reliability is difficult to achieve because wide-area networks, such as the Internet, are built from many autonomously configured component networks. Today there exists a large gap between the intended design of a network and the implementation of that design. This is because complex network poli ...

    STTR Phase II 2009 Department of DefenseDefense Advanced Research Projects Agency
  10. Advanced Development for Defense Science and Technology

    SBC: Jonathan Aerospace Materials Corporation            Topic: SB082007

    Lattice Block Materials, or LBM for short, are a class of materials comprised of an open structure of ligaments arranged in a regular truss like structure that is three dimensional. A basic unit cell is comprised of a square based pyramid skeleton (just the corners, called nodes, and the edges, called ligaments). These cells are connected in all directions to form a larger lattice like structure ...

    SBIR Phase I 2009 Department of DefenseDefense Advanced Research Projects Agency
US Flag An Official Website of the United States Government