Award Data

In the proposed effort, we will leverage this extensive experience and capabilities to realize a frequency agile mmW radiometer that can cover the range of DC-110 GHz and can be scaled to DC-200 GHz under Phase II. Ours is a photonic system that multiplies and up-coverts a low-frequency reference signal onto an optical carrier (laser) using EO modulation, then uses the modulation sidebands to inj ...

This SBIR Phase I effort will establish the feasibility of fabricating advanced waveguide structures in potassium titanyl phosphate (KTP) capable of efficiently generating 25 to 40 mW of frequency converted light in the 395 to 480 nm. The key innovation in this effort is to utilize KTP waveguides in a single-pass frequency doubling device to efficiently produce the desired laser wavelengths and po ...

This NIST Phase II SBIR effort will two low noise single photon detectors using MgO doped LiNbO3 (LN) periodically poled waveguides and a 980nm (or similar appropriate wavelength) pump to up convert 1550nm photons to 600nm to allow for detection by photomultiplier tube (PMT). The key innovation is using low noise periodically poled waveguides with a long wavelength (1800nm) pump leading to higher ...

In the proposed Phase I SBIR program, Aymont Technology and CoolCAD Electronics will design and demonstrate prototype silicon carbide (SiC) avalanche photodiodes (APD) specifically designed for high-efficiency, single-photon counting of 121.6 nm Lyman-alpha photons. This detector will be provided to relevant personnel at NIST for calibration and testing. Both discrete APDs and arrays will be used ...

This is an SBIR Phase II proposal to develop a tactile refreshable computer display prototype (TRCD) that will support multiple tactile alphabets (e.g. ELIA, braille, and Roman), multiple lines of text, and graphics to benefit the more than 1.8 million blind Americans. Commercially available TRCDs are expensive (~$12,000, or $19 per actuator), provide only one line of text (with 640 actuators) and ...

A wireless sensor and actuator network capable of providing precision time synchronization between the nodes of the network will be developed. The IEEE 1451.0 smart transducer interface and IEEE 1588 time synchronization standards will be combined, with additional software and hardware to provide synchronization between the clocks on the Wireless Transducer Interface Modules (WTIM) sensors/actuato ...

An existing low-cost FPGA-based processing platform will be demonstrated with fiber-coupling to single-photon detectors, to perform photon-arrival time stamping with

A stable, well characterized InGaAs materials growth and photodetector fabrication process will be used to fabricate matched photodiodes optimized for balanced homodyne detection. The 1-mm-diameter p-i-n photodetectors will be manufactured back-illuminated with a 5-micron absorber, allowing residual light to reflect off the front-side metal to make a double pass through the active layer. Ultra-hig ...

Voxtel has demonstrated efficient high-speed photon counting with thresholded linear-mode avalanche photodiode (APD) receivers using multi-gain-stage InGaAs/InAIAs APDs. In contrast to Geiger APDs, thresholded photon-counting linear APD receivers are thought not to suffer afterpulsing, and can support maximum count rates (MCR) up to 2 or 3 orders of magnitude faster than Geiger APDs. However, the ...

The current testing methods of the NIST Security Content Automation Protocol (SCAP) Validation Program are largely manual and labor-intensive, making comprehensive validation of SCAP-enabled IT security products difficult and time-consuming. ATC-NY will design and develop the Automated SCAP Tool Validator (ASTV) for use with the SCAP Public Validation Test Suite and others. ASTV automates the conf ...