You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY23 is not expected to be complete until September, 2024.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.

  1. Fabrication of Advanced Waveguide Structures for Efficient Violet and Near-UV Generation

    SBC: ADVR, INC.            Topic: N/A

    This SBIR Phase I effort will establish the feasibility of fabricating advanced waveguide structures in potassium titanyl phosphate (KTP) capable of efficiently generating 25 to 40 mW of frequency converted light in the 395 to 480 nm. The key innovation in this effort is to utilize KTP waveguides in a single-pass frequency doubling device to efficiently produce the desired laser wavelengths and po ...

    SBIR Phase I 2009 Department of CommerceNational Institute of Standards and Technology
  2. High Efficiency Up conversion Single-Photon-Detector for 1550 nm Signal

    SBC: ADVR, INC.            Topic: N/A

    This NIST Phase II SBIR effort will two low noise single photon detectors using MgO doped LiNbO3 (LN) periodically poled waveguides and a 980nm (or similar appropriate wavelength) pump to up convert 1550nm photons to 600nm to allow for detection by photomultiplier tube (PMT). The key innovation is using low noise periodically poled waveguides with a long wavelength (1800nm) pump leading to higher ...

    SBIR Phase II 2009 Department of CommerceNational Institute of Standards and Technology
  3. Abrasion protection, ballistic tolerance, and laser protection for windows/sensor on rotary wing aircraft.

    SBC: INTER MATERIALS, LLC            Topic: SOCOM07007

    Some of the US Army SOCOM greatest concerns are to maintain the helicopter pilot’s ability to see clearly and to provide helicopter windscreens with a greater degree of erosion/abrasion protection than what is being currently afforded. Recent developments on polymer coatings demonstrate the potential to meet and exceed all erosion/abrasion resistance and optical requirements by using plasma depo ...

    SBIR Phase II 2009 Department of DefenseSpecial Operations Command
  4. Geo And Ortho Rectified Video With Fused 3d Mapping, Light Detection And Ranging (LIDAR), And Live Video Overlays

    SBC: MOSAIC ATM, INC.            Topic: SOCOM09003

    The Mosaic ATM team proposes an innovative real-time exploitation framework for video and Lidar processing whose structure can be reconfigured at optempo to meet evolving requirements. We propose to leverage the tremendous commercial investment in products, such as Google Earth, for 3D coincident display of Lidar and video streams processed using mature technology components whose integration wi ...

    SBIR Phase I 2009 Department of DefenseSpecial Operations Command
  5. (Shape Memory Integrated Vital Energy Resource) SHIVER-Suit for SOF Divers

    SBC: NANOSONIC INC.            Topic: SOCOM09001

    NanoSonic would develop ultra-lightweight (0.98 g/cc), breathable, nanostructured, yet large area Metal Rubber™ Skins and Textiles with active thermal control. The proposed SHIVER-Suits (Shape Memory Integrated Vital Energy Resource) for U.S. Special Operation Forces are expected to extend both the comfort and time of the Divers’ missions. Shape Memory-Metal Rubber™ garments based on shape ...

    SBIR Phase I 2009 Department of DefenseSpecial Operations Command
  6. Dynamic Light Scattering Instrumentation Using Field Programmable Gate Array-based Digital Signal Processing

    SBC: VOXTEL, INC.            Topic: N/A

    An existing low-cost FPGA-based processing platform will be demonstrated with fiber-coupling to single-photon detectors, to perform photon-arrival time stamping with

    SBIR Phase I 2009 Department of CommerceNational Institute of Standards and Technology
  7. High Efficiency, Large-area, 1550 nm InGaAs Photodiodes

    SBC: VOXTEL, INC.            Topic: N/A

    A stable, well characterized InGaAs materials growth and photodetector fabrication process will be used to fabricate matched photodiodes optimized for balanced homodyne detection. The 1-mm-diameter p-i-n photodetectors will be manufactured back-illuminated with a 5-micron absorber, allowing residual light to reflect off the front-side metal to make a double pass through the active layer. Ultra-hig ...

    SBIR Phase I 2009 Department of CommerceNational Institute of Standards and Technology
  8. Efficient Low-Dark-Count Detector for Photon Counting

    SBC: VOXTEL, INC.            Topic: N/A

    Voxtel has demonstrated efficient high-speed photon counting with thresholded linear-mode avalanche photodiode (APD) receivers using multi-gain-stage InGaAs/InAIAs APDs. In contrast to Geiger APDs, thresholded photon-counting linear APD receivers are thought not to suffer afterpulsing, and can support maximum count rates (MCR) up to 2 or 3 orders of magnitude faster than Geiger APDs. However, the ...

    SBIR Phase II 2009 Department of CommerceNational Institute of Standards and Technology
  9. Inline Material Electrical Characterization Sensor (IMECS)

    SBC: PANERATECH, INC.            Topic: N/A

    There is no capability to rapidly assess the electrical properties of nanofiber films during manufacturing and prepregging process. Continuous monitoring of these films will guide the U.S. nanofiber manufacturing industry in optimizing and increasing the yield rate with proper process optimization and avoid any inconsistency in the process and the cost with associated waste material. To address th ...

    SBIR Phase II 2013 Department of CommerceNational Institute of Standards and Technology
  10. Smart Manufacturing Workflow Environment

    SBC: NIMBIS SERVICES INC            Topic: N/A

    Nimbis in partnership with UCLA and Smart Manufacturing Leadership Coalition (SMLC) will provide an open workflow environment that supports the sequential execution of 3rd party APPS using net-worked information based modeling and data analytic technologies to integrate manufacturing intelligence across an entire manufacturing ecosystem. The SMWE leverages Nimbis commercial cloud technical analysi ...

    SBIR Phase I 2013 Department of CommerceNational Institute of Standards and Technology
US Flag An Official Website of the United States Government