You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY24 is not expected to be complete until March, 2025.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.

  1. Query-Based Interoperability for Simulation of Composite Structures

    SBC: INTACT SOLUTIONS, INC            Topic: 9020673R

    We propose to design and implement a query-based approach to interoperable modeling and simulation of composite material structures, that usually contain the manufacturing recipe within their design. In Phase I, we established the feasibility of the approach using a demonstration scenario of CAD/CAE interoperability for assemblies. In Phase II, we propose to develop a series of use-case scenarios ...

    SBIR Phase II 2013 Department of CommerceNational Institute of Standards and Technology
  2. Development of a Long Term pH and pCO2 Lagrangian Drifter

    SBC: SUNBURST SENSORS, LLC            Topic: 831C

    Quantifying oceanic CO2 uptake and ocean acidification and understanding their impact on global climate and ocean ecology are key goals of NOAA’s climate change research programs. NOAA’s request for Development of a long-term Lagrangian pH and pCO2 drifter (SBIR Subtopic 8.3.1C) aims to address these goals by developing technology that measures both pCO2 and pH that can be widely deployed in t ...

    SBIR Phase II 2013 Department of CommerceNational Oceanic and Atmospheric Administration
  3. Porous Membrane Electrode for Quantitative Detection of Toxins

    SBC: Mercury Science Inc.            Topic: 816N

    In Phase I, a novel porous electrode was designed to demonstrate a rapid, simple assay for the detection of domoic acid in marine samples. During Phase II, methods to manufacture porous electrodes will be improved to enable high volume production of low-cost biosensors that can be connected to a potentiostat. These biosensors will be incorporated into a portable test kit for the quantitation of do ...

    SBIR Phase II 2013 Department of CommerceNational Oceanic and Atmospheric Administration
  4. Dynamic Frequency Passive Millimeter-Wave Radiometer Based on Optical Up-Conversion

    SBC: PHASE SENSITIVE INNOVATIONS INC            Topic: 941D

    In the proposed effort, we will leverage this extensive experience and capabilities to realize a frequency agile mmW radiometer that can cover the range of DC-110 GHz and can be scaled to DC-200 GHz under Phase II. Ours is a photonic system that multiplies and up-coverts a low-frequency reference signal onto an optical carrier (laser) using EO modulation, then uses the modulation sidebands to inj ...

    SBIR Phase I 2013 Department of CommerceNational Oceanic and Atmospheric Administration
  5. Over the Horizon Underwater Communications

    SBC: Physical Devices, Inc.            Topic: SOCOM13002

    An analysis of alternatives, including modeling, will be conducted of such candidates technologies such as localization, energy provision, and reporting, which are required for long-duration, LPD localization of various types of vessels operating in blue, green and brown water, with near-real time communications, to support global maritime tag track and locate capabilities in support of national a ...

    SBIR Phase I 2013 Department of DefenseSpecial Operations Command
  6. Integrated Wideband Tactical Power Amplifier

    SBC: VADUM INC            Topic: SOCOM13004

    Vadum proposes a feasibility study to define the next generation power amplifier for the Special Operations Forces (SOF) warfighter. This program will deliver extended bandwidth, more complex waveform capability, longer battery life, higher field reliability, and wide compatibility across radio types. The Phase I deliverable will be a comprehensive trade study and a proposed PA design which incl ...

    SBIR Phase I 2013 Department of DefenseSpecial Operations Command
  7. Family of Sub-Sonic Ammunition

    SBC: Stillwood Ammunition Systems LLC.            Topic: SOCOM13005

    Technical abstract 13.1-005 Today there is no sub-sonic ammunition currently type classified for use in the calibers provided by any DoD Service. Although sub-sonic rounds exist for some calibers, these rounds are not cost effective and exhibit excessive deviations in velocity (affecting accuracy), incomplete chamber sealing, absence of clean propellant burn, and inability to cycle the action on ...

    SBIR Phase I 2013 Department of DefenseSpecial Operations Command
  8. Development and Prototyping of a Digital Pulse Processor for Improved Coincidence Detection, Rejection, and Pulse Recovery, for High Count-Rate Silicon Drift Detectors

    SBC: 4pi Analysis, Inc.            Topic: N/A

    The recent emergence of the Silicon Drift detector (SDD), for use in energy dispersive x-ray spectrometry (EDS), has made possible x-ray event streams with count rates as high as 1-10 Mcps. A problem with existing digital signal processing, as applied to SDDs, is the significant presence of coincidence peaks above the x-ray background. These coincidence peaks occur with amplitudes comparable to lo ...

    SBIR Phase II 2009 Department of CommerceNational Institute of Standards and Technology
  9. Fabrication of Advanced Waveguide Structures for Efficient Violet and Near-UV Generation

    SBC: ADVR, INC.            Topic: N/A

    This SBIR Phase I effort will establish the feasibility of fabricating advanced waveguide structures in potassium titanyl phosphate (KTP) capable of efficiently generating 25 to 40 mW of frequency converted light in the 395 to 480 nm. The key innovation in this effort is to utilize KTP waveguides in a single-pass frequency doubling device to efficiently produce the desired laser wavelengths and po ...

    SBIR Phase I 2009 Department of CommerceNational Institute of Standards and Technology
  10. High Efficiency Up conversion Single-Photon-Detector for 1550 nm Signal

    SBC: ADVR, INC.            Topic: N/A

    This NIST Phase II SBIR effort will two low noise single photon detectors using MgO doped LiNbO3 (LN) periodically poled waveguides and a 980nm (or similar appropriate wavelength) pump to up convert 1550nm photons to 600nm to allow for detection by photomultiplier tube (PMT). The key innovation is using low noise periodically poled waveguides with a long wavelength (1800nm) pump leading to higher ...

    SBIR Phase II 2009 Department of CommerceNational Institute of Standards and Technology
US Flag An Official Website of the United States Government