You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY24 is not expected to be complete until March, 2025.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.

  1. Query-Based Interoperability for Simulation of Composite Structures

    SBC: INTACT SOLUTIONS, INC            Topic: 9020673R

    We propose to design and implement a query-based approach to interoperable modeling and simulation of composite material structures, that usually contain the manufacturing recipe within their design. In Phase I, we established the feasibility of the approach using a demonstration scenario of CAD/CAE interoperability for assemblies. In Phase II, we propose to develop a series of use-case scenarios ...

    SBIR Phase II 2013 Department of CommerceNational Institute of Standards and Technology
  2. "Night Glow"Short Wave Infrared LED (NSLED) Image Projector Development

    SBC: Chip Design Systems Inc.            Topic: AF131098

    ABSTRACT: This project aims to develop a Short Wave Infrared band image projector to provide real time detector stimulation with high dynamic range. Our emitter technology is based on GaInAsSb quaternary semiconductor LED arrays hybridized to CMOS read-in integrated circuits. This project leverages read-in circuit design and control electronics that were developed under SLEDS - a longer wavelengt ...

    SBIR Phase I 2013 Department of DefenseAir Force
  3. A High Flux Neutron Generator for Measuring Bulk Residual Stress via Diffraction

    SBC: Phoenix LLC            Topic: AF131119

    ABSTRACT: Residual stresses can be created in engineered components by most common fabrication processes (e.g., welding, joining, machining, casting, heat treating, press fitting, etc.). They are of particular concern to the aerospace industry because they are difficult to measure and can lead to premature failure of flight-critical components. There are several established methodologies for ch ...

    SBIR Phase I 2013 Department of DefenseAir Force
  4. Cetane Sensor for Remotely Piloted Aircraft (RPA) Propulsion Systems that Operate on Heavy Fuel

    SBC: YELLOWSTONE SCIENTIFIC INSTRUMENTS            Topic: AF131158

    ABSTRACT: We propose to develop a lightweight, compact Cetane sensor interfaced to a fiberoptic probe immersed in the RPA fuel tank to continuously measure, update and report Cetane number to the engine electronics for control of engine settings for RPA internal combustion engines (ICE) operating on heavy fuels. The sensor will be based on laser light scattering and will be made small and light ...

    SBIR Phase I 2013 Department of DefenseAir Force
  5. Dynamic Frequency Passive Millimeter-Wave Radiometer Based on Optical Up-Conversion

    SBC: PHASE SENSITIVE INNOVATIONS INC            Topic: 941D

    In the proposed effort, we will leverage this extensive experience and capabilities to realize a frequency agile mmW radiometer that can cover the range of DC-110 GHz and can be scaled to DC-200 GHz under Phase II. Ours is a photonic system that multiplies and up-coverts a low-frequency reference signal onto an optical carrier (laser) using EO modulation, then uses the modulation sidebands to inj ...

    SBIR Phase I 2013 Department of CommerceNational Oceanic and Atmospheric Administration
  6. Development of a Long Term pH and pCO2 Lagrangian Drifter

    SBC: SUNBURST SENSORS, LLC            Topic: 831C

    Quantifying oceanic CO2 uptake and ocean acidification and understanding their impact on global climate and ocean ecology are key goals of NOAA’s climate change research programs. NOAA’s request for Development of a long-term Lagrangian pH and pCO2 drifter (SBIR Subtopic 8.3.1C) aims to address these goals by developing technology that measures both pCO2 and pH that can be widely deployed in t ...

    SBIR Phase II 2013 Department of CommerceNational Oceanic and Atmospheric Administration
  7. Packaging High Power Photodetectors for 100 MHz to 100 GHz RF Photonic Applications

    SBC: PHASE SENSITIVE INNOVATIONS INC            Topic: AF131142

    ABSTRACT: In this SBIR effort we will develop a packaging process and demonstrate (Phase I) a prototype of high power Photodiode (PD) that has a normal incident, pigtailed fiber input and a coaxial RF output that operates from DC to>60GHz. We will apply and extend (Phase II) the aforementioned packaging process to single PD, balanced PD and array of PDs that work from DC through entire W-band. De ...

    SBIR Phase I 2013 Department of DefenseAir Force
  8. Satellite Optical Backplane

    SBC: EM PHOTONICS INC            Topic: AF103097

    ABSTRACT: there is a clear need for a radically new interconnect architecture that minimizes the routing delay through the backplane to enable increased performance, reduced costs, and faster time to market. To this end, we propose the development of a space compatible optically interconnected backplane with reconfigurable routing fabric. By removing the electrical interconnections between logi ...

    SBIR Phase II 2013 Department of DefenseAir Force
  9. Abrasion and Impact Resistant Hydrophobic Thermoplastic Coatings for Aircraft Landing Skis/Skids

    SBC: RESODYN CORPORATION            Topic: AF103256

    ABSTRACT: Resodyn Corporations proposed Functionalized Polyethylene (FPE) copolymer thermoplastic coating will overcome the shortcomings of the current ski coating. The FPE will provide the long-lasting, low friction, impact-resistant, abrasion resistant and hydrophobic properties required and will also provide hydraulic fluid resistance and reduced drag during wet snow conditions. Enhancements ...

    SBIR Phase II 2013 Department of DefenseAir Force
  10. Roll-to-Roll Printing of Patterned Nanomembranes on Flexible Substrates

    SBC: SysteMECH, Inc            Topic: OSD10T005

    Flexible electronic and optical devices, including sensors/detectors, waveguides, and photonic crystal structures, have significant promise for improving communication and information processing capabilities in a number of military and commercial applications. However, the development of such flexible devices has been hindered by the lack of effective manufacturing processes for producing these de ...

    STTR Phase II 2013 Department of DefenseAir Force
US Flag An Official Website of the United States Government