You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY24 is not expected to be complete until March, 2025.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.

  1. Scanning Probe Microscopy with Active Optical Probes: A Novel Approach to Measurements and Nanomanufacturing

    SBC: Actoprobe LLC            Topic: 2

    Actoprobe LLC proposes development of a novel class of Atomic Force Microscopy (AFM) active optical probes with dramatically increased sensitivity and spatial resolution for Near-Field Optical Nanospectroscopy and Nanoscopy. The innovation is accomplished by integrating a diode laser source and a photodetector into a silicon AFM probe in such a way that both the AFM tip and detector are inside the ...

    SBIR Phase I 2023 Department of CommerceNational Institute of Standards and Technology
  2. Optically Transparent Tapered Resistive Films

    SBC: Nanovox, LLC            Topic: SOCOM16004

    To enhance U.S. Navy operations, a technology platform will be developed for fabricating environmentally robust, visible through near-infrared (NIR) band transparent, tapered resistivity films. After refining the operational requirements and updating the device design models, a design trade study will be performed using the measured electrical (i.e., conductivity) and optical (i.e., spectral trans ...

    SBIR Phase II 2022 Department of DefenseSpecial Operations Command
  3. Dynamic Incident Intelligence System, Utilizing Adaptation to Real-Time Information

    SBC: Emergent Health Care Solutions            Topic: 90

    Emergent Healthcare Solutions proposes to research the feasibility of a dynamic cloud-based incident Intelligence System called Emergent Cloud. Emergent Cloud is an application service providing firefighters and Emergency Medical Technicians access to an interactive incident roadmap and real-time workflow and record keeping. The general aim of the proposed project is to revolutionize the user expe ...

    SBIR Phase I 2020 Department of CommerceNational Institute of Standards and Technology
  4. Tactical Active Anti-Fogging Goggle or Spectacle

    SBC: Abom, Inc.            Topic: SOCOM181003

    Develop an innovative tactical active anti-fogging goggle or spectacle in a smaller form factor than traditional goggles.

    SBIR Phase II 2020 Department of DefenseSpecial Operations Command
  5. Innovative CubeSat Payloads for USSOCOM Space Missions

    SBC: A-TECH CORPORATION            Topic: SOCOM17003

    Small satellites have proven capable and cost effective, and innovative payloads and technologies will expand the mission space that CubeSats can support. ATA proposes to build a CubeSat-sized laser communications prototype payload, adapting high photon efficiency optical communications techniques to achieve data transfer rates up to 100 mega-bits per second (Mbps) with the small apertures require ...

    SBIR Phase II 2018 Department of DefenseSpecial Operations Command
  6. Tactical Active Anti-Fogging Goggle or Spectacle

    SBC: Abom, Inc.            Topic: SOCOM18003

    ABOM has developed a novel active anti-fog technology platform that has solved the problem of eyewear fogging. These fog-free and ballistics-rated polycarbonate lenses provide the individual soldier with sustained distant visual acuity and improved situational awareness. Under this proposed SBIR Phase I project, ABOM will perform evaluation and feasibility studies for four proposed Military Combat ...

    SBIR Phase I 2018 Department of DefenseSpecial Operations Command
  7. CubeSat Laser Communications (CubeSat LaserCom)

    SBC: A-TECH CORPORATION            Topic: SOCOM17003

    ATA proposes to conduct feasibility studies and develop a CubeSat Laser Communications (CubeSat LaserCom) system that enables high data rate communications from a CubeSat to ground terminals, GEO terminals, and other CubeSats. Our proposed CubeSat LaserCom terminal integrates advanced ATA line-of-sight stabilization, tracking and pointing technologies with space-qualified laser and detector techn ...

    SBIR Phase I 2017 Department of DefenseSpecial Operations Command
  8. LinkStar, a high performance, secure, integrated flight computer and radio system for CubeSats

    SBC: SCI_ZONE INC            Topic: SOCOM17003

    sci_Zone is seeking to develop LinkStar, an integrated flight computer and radio system/hosted payload for cubesats. The goal of this payload is to become the heart of future cubesats to provide a secure, high performance flight computer with integrated communications framework that uses no more than 3W average power and fits within 0.5U. The heart of the LinkStar system is the Xilinx Zynq UltraS ...

    SBIR Phase I 2017 Department of DefenseSpecial Operations Command
  9. Advanced Tactical Facial Recognition at a Distance Technology

    SBC: TAU TECHNOLOGIES LLC            Topic: SOCOM163003

    Tau Technologies leads a team with proven experience in applying technology to solve real world challenges. Our program manager was the Principal Investigator at Battelle Memorial Institute on a project that successfully developed and demonstrated a 300-meter range, man-portable facial recognition system for SOCOM. This proposal will incorporate newer technology and algorithms to improve accurac ...

    SBIR Phase I 2017 Department of DefenseSpecial Operations Command
  10. Transparent Tapered Resistive Elements

    SBC: VOXTEL, INC.            Topic: SOCOM16004

    A robust system level design process will be used to identify the design of transparent tapered resistive (TTR) elements, including the materials, fabrication processes, and lifecycle costs. The transparent tapered resistive film will be designed to provides a tapered resistive layer across the film while remaining transparent in the visual and near-infrared optical bands for use in radio-frequenc ...

    SBIR Phase I 2016 Department of DefenseSpecial Operations Command
US Flag An Official Website of the United States Government