List

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY19 is not expected to be complete until April, 2020.

  1. A Portable Vibrio Cholerae Concentrator for Sensitive Pathogen Detection in Water

    SBC: Omnivis LLC            Topic: None

    This SBIR Phase I project proposes to develop an easy to use, inexpensive, and portable bacterial concentrator to enable more sensitive cholera pathogen (Vibrio cholerae) detection. Cholera affects communities across 41 countries, including Mozambique in 2019 after Cyclone Idai and Yemen in 2017. Current methods used to detect the cholera pathogen in water involves a 3 to 5-day procedure due to th ...

    SBIR Phase I 2019 Department of CommerceNational Institute of Standards and Technology
  2. Ultrasonic Additive Manufacturing of a deep throttling methane injector.

    SBC: T G V Rockets Inc            Topic: T9

    Design and manufacture of a Liquid fuel injector optimized for Ultrasonic Additive Manufacturing. UAM delivers aerospace parts today at 97% of bulk material property and foil laydown rates at speeds significantly better then powder or filament process. UAM has traditionally been applied to 2-D planar surfaces. We will extend UAM into complex geometries and constructs suitable for rocket engine inj ...

    STTR Phase I 2018 National Aeronautics and Space Administration
  3. Integrated Adaptive Route Capability

    SBC: CGH TECHNOLOGIES, INC.            Topic: A3

    This SBIR provides advanced, automated mechanisms for ANSPs and the flight operators to enrich and interact with IFR Preferred Routes in the U.S. National Airspace System (NAS). The FAA’s Instrument Flight Rules (IFR) Preferred Route Program was developed to allow air traffic facilities to identify select routes for use into and out of busy airports and airspace.  We apply automation to ...

    SBIR Phase I 2018 National Aeronautics and Space Administration
  4. A Decoupled Hydrogen Boost Electropumpfor Nuclear Thermal Propulsion

    SBC: T G V Rockets Inc            Topic: Z10

    NASA has identified Nuclear Thermal Propulsion (NTP) as an advanced propulsion concept for human missions to Mars.  It is seeking technologies related to NTP for development of the reactors and technologies needed for ground testing.  In the area of ground testing, NASA is interested in approaches to efficiently generate high temperature, high flow rate hydrogen.  TGV Rockets, Inc., ...

    SBIR Phase I 2018 National Aeronautics and Space Administration
  5. Electromagnetic Characterization of Advanced Composites by Voxel-Based Inverse Methods

    SBC: VICTOR TECHNOLOGIES LLC            Topic: Z11

    The nondestructivecharacterization of advanced composites, such ascarbon-fiber reinforced polymers (cfrp), by electromagnetic means iswell established [6]-[24].  What isneeded to advance the state of the art are sophisticated inversionalgorithms that allow layup and impact damage to be determined inlocalized regions, which means that the more traditional methods ofmodel-based inverse methods ...

    SBIR Phase II 2018 National Aeronautics and Space Administration
  6. Rodent Centrifuge Facility Quad Locker for ISS Life and Microgravity Science Research

    SBC: TECHSHOT, INC.            Topic: H8

    According to the decadal report titled, Life and Physical Sciences Research for a New Era of Space Exploration, a Report, "...the AHB Panel would be remiss if it did not strongly recommend an animal centrifuge capable of accommodating rats/mice at variable gravity levels." Furthermore, the panel stated, “...research on animal models will be constrained without the ability to manipu ...

    SBIR Phase II 2018 National Aeronautics and Space Administration
  7. Autonomous Power Controller for Mission Critical Microgrids

    SBC: P C KRAUSE AND ASSOCIATES INC            Topic: T3

    PCKA is partnering with researchers at Purdue University to develop an Autonomous Power Controller (APC) for mission-critical microgrids to supply electric power in a highly autonomous and secure manner to accomplish mission objectives. The APC consists of a centralized controller connected to an array of local component controllers. The centralized controller will be capable of optimal generation ...

    STTR Phase II 2018 National Aeronautics and Space Administration
  8. Optical Device for Sorting Particles by Size

    SBC: En'urga Inc.            Topic: NA

    This Phase II SBIR project will continue the development of an optical sorter that will be used to estimate drop sizes in sprays. The optical sorter will determine the size of drops in the 0.1 to 10 microns range. Drops in this size range are prevalent in the automobile industry, where the fuel injection pressures have increased tremendously over the past two decades. These newer injectors provide ...

    SBIR Phase II 2018 Department of CommerceNational Institute of Standards and Technology
  9. A Reconfigurable Transmitter and Receiver for Aeronautical Telemetry Applications

    SBC: INDIANA MICROELECTRONICS, LLC            Topic: A201

    This project focuses on the development of a reconfigurable microwave transmitter and receiver for telemetry applications. Both the transmitter and receiver are able to operate at any frequency between the L and C Bands. The software defined transmitter is able to change its center frequency, output bandwidth and output power as well as operate with multiple simultaneous output frequencies. The fl ...

    SBIR Phase I 2017 National Aeronautics and Space Administration
  10. Sintered Inductive Metal Printer with Laser Exposure

    SBC: TECHSHOT, INC.            Topic: H1401

    Techshot's innovative 3D metal printer offers the unique ability to fabricate metal components and tools in space which can be utilized for sustainability, maintenance and research. The proposed system will accomplish this task through the utilization of a two-stage filament melting process whereby a metallic filament is first heated to Curie temperature through induction and then deposited on a b ...

    SBIR Phase II 2017 National Aeronautics and Space Administration

Agency Micro-sites

SBA logo
Department of Agriculture logo
Department of Commerce logo
Department of Defense logo
Department of Education logo
Department of Energy logo
Department of Health and Human Services logo
Department of Homeland Security logo
Department of Transportation logo
Environmental Protection Agency logo
National Aeronautics and Space Administration logo
National Science Foundation logo
US Flag An Official Website of the United States Government