List
The Award database is continually updated throughout the year. As a result, data for FY19 is not expected to be complete until April, 2020.
-
A Portable Vibrio Cholerae Concentrator for Sensitive Pathogen Detection in Water
SBC: Omnivis LLC Topic: NoneThis SBIR Phase I project proposes to develop an easy to use, inexpensive, and portable bacterial concentrator to enable more sensitive cholera pathogen (Vibrio cholerae) detection. Cholera affects communities across 41 countries, including Mozambique in 2019 after Cyclone Idai and Yemen in 2017. Current methods used to detect the cholera pathogen in water involves a 3 to 5-day procedure due to th ...
SBIR Phase I 2019 Department of CommerceNational Institute of Standards and Technology -
Smart Fault Management (SFM)
SBC: TMC Technologies of WV Corp Topic: S5The Phase I of the SBIR “Smart Fault Management” project aims to demonstrate how the fault management process can be innovated by exploiting concepts from a combination of well-established and emerging disciplines such as Bayesian Statistics, GPU-accelerated numerical simulations, Data Science, and Machine Learning that are disrupting the current status quo in many scientific and engin ...
SBIR Phase I 2018 National Aeronautics and Space Administration -
Fabric Reinforced Metal Matrix Composite
SBC: TOUCHSTONE RESEARCH LABORATORY LTD (INC) Topic: Z3The proposed research aims to develop a metal matrix composite (MMC) fabric that, when combined with additive manufacturing, will lead to weight reduction, increased structural performance, and reduce fabrication costs of structural components within launch vehicles. The approach focuses on developing a MMC fabric that will be used to selectively reinforce metallic components that are subjected to ...
SBIR Phase I 2018 National Aeronautics and Space Administration -
Electromagnetic Characterization of Advanced Composites by Voxel-Based Inverse Methods
SBC: VICTOR TECHNOLOGIES LLC Topic: Z11The nondestructivecharacterization of advanced composites, such ascarbon-fiber reinforced polymers (cfrp), by electromagnetic means iswell established [6]-[24]. What isneeded to advance the state of the art are sophisticated inversionalgorithms that allow layup and impact damage to be determined inlocalized regions, which means that the more traditional methods ofmodel-based inverse methods ...
SBIR Phase II 2018 National Aeronautics and Space Administration -
Intelligent Electronic Speed Controller
SBC: 4D TECH SOLUTIONS, INC. Topic: A1This project will result in the commercialization of an Intelligent Electronic Speed Controller (IESC) for use on Unmanned Aerial Vehicles (UAVs). The IESC will advance the state-of-the-art of health-state awareness. This will be achieved through the integration of propulsion system health monitoring sensors that - in unison with an Intelligent Rule Set - will be able to monitor system and compone ...
SBIR Phase II 2018 National Aeronautics and Space Administration -
Rodent Centrifuge Facility Quad Locker for ISS Life and Microgravity Science Research
SBC: TECHSHOT, INC. Topic: H8According to the decadal report titled, Life and Physical Sciences Research for a New Era of Space Exploration, a Report, "...the AHB Panel would be remiss if it did not strongly recommend an animal centrifuge capable of accommodating rats/mice at variable gravity levels." Furthermore, the panel stated, “...research on animal models will be constrained without the ability to manipu ...
SBIR Phase II 2018 National Aeronautics and Space Administration -
Autonomous Power Controller for Mission Critical Microgrids
SBC: P C KRAUSE AND ASSOCIATES INC Topic: T3PCKA is partnering with researchers at Purdue University to develop an Autonomous Power Controller (APC) for mission-critical microgrids to supply electric power in a highly autonomous and secure manner to accomplish mission objectives. The APC consists of a centralized controller connected to an array of local component controllers. The centralized controller will be capable of optimal generation ...
STTR Phase II 2018 National Aeronautics and Space Administration -
Optical Device for Sorting Particles by Size
SBC: En'urga Inc. Topic: NAThis Phase II SBIR project will continue the development of an optical sorter that will be used to estimate drop sizes in sprays. The optical sorter will determine the size of drops in the 0.1 to 10 microns range. Drops in this size range are prevalent in the automobile industry, where the fuel injection pressures have increased tremendously over the past two decades. These newer injectors provide ...
SBIR Phase II 2018 Department of CommerceNational Institute of Standards and Technology -
Intelligent Electronic Speed Controller
SBC: 4D TECH SOLUTIONS, INC. Topic: A106This project intends to design and develop an Intelligent Electronic Speed Controller (IESC) for use on Unmanned Aerial Vehicles (UAVs). The IESC will advance the state-of-the-art of health-state awareness. This will be achieved through the integration of propulsion system health monitoring sensors that - in unison with an Intelligent Rule Set - will be able to monitor system and component perfo ...
SBIR Phase I 2017 National Aeronautics and Space Administration -
A Reconfigurable Transmitter and Receiver for Aeronautical Telemetry Applications
SBC: INDIANA MICROELECTRONICS, LLC Topic: A201This project focuses on the development of a reconfigurable microwave transmitter and receiver for telemetry applications. Both the transmitter and receiver are able to operate at any frequency between the L and C Bands. The software defined transmitter is able to change its center frequency, output bandwidth and output power as well as operate with multiple simultaneous output frequencies. The fl ...
SBIR Phase I 2017 National Aeronautics and Space Administration