List

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY19 is not expected to be complete until April, 2020.

  1. A Portable Vibrio Cholerae Concentrator for Sensitive Pathogen Detection in Water

    SBC: Omnivis LLC            Topic: None

    This SBIR Phase I project proposes to develop an easy to use, inexpensive, and portable bacterial concentrator to enable more sensitive cholera pathogen (Vibrio cholerae) detection. Cholera affects communities across 41 countries, including Mozambique in 2019 after Cyclone Idai and Yemen in 2017. Current methods used to detect the cholera pathogen in water involves a 3 to 5-day procedure due to th ...

    SBIR Phase I 2019 Department of CommerceNational Institute of Standards and Technology
  2. High Performance PMD

    SBC: GLOYER-TAYLOR LABORATORIES LLC            Topic: Z10

    To achieve the full potential of PMD/LAD technology for high performance space exploration missions mass reduction is essential. Screen channel acquisition devices are an interesting approach for future spacecraft using cryogenic propellants.  However, traditional manufacturing techniques (i.e. metal-based) are heavy and have reliability issues.  To achieve desired mass savings and scree ...

    SBIR Phase I 2018 National Aeronautics and Space Administration
  3. Electromagnetic Characterization of Advanced Composites by Voxel-Based Inverse Methods

    SBC: VICTOR TECHNOLOGIES LLC            Topic: Z11

    The nondestructivecharacterization of advanced composites, such ascarbon-fiber reinforced polymers (cfrp), by electromagnetic means iswell established [6]-[24].  What isneeded to advance the state of the art are sophisticated inversionalgorithms that allow layup and impact damage to be determined inlocalized regions, which means that the more traditional methods ofmodel-based inverse methods ...

    SBIR Phase II 2018 National Aeronautics and Space Administration
  4. Rodent Centrifuge Facility Quad Locker for ISS Life and Microgravity Science Research

    SBC: TECHSHOT, INC.            Topic: H8

    According to the decadal report titled, Life and Physical Sciences Research for a New Era of Space Exploration, a Report, "...the AHB Panel would be remiss if it did not strongly recommend an animal centrifuge capable of accommodating rats/mice at variable gravity levels." Furthermore, the panel stated, “...research on animal models will be constrained without the ability to manipu ...

    SBIR Phase II 2018 National Aeronautics and Space Administration
  5. Structural Nervous System

    SBC: GLOYER-TAYLOR LABORATORIES LLC            Topic: T12

    GTL proposes to further the development of its SNS technology towards adoption into aerospace structures. The SNS technology is an enabler technology for the expanded use of structural health monitoring systems. It allows the large data architectures needed for these types of systems to be implemented with minimal mass and impact to structural performance. GTL will accomplish this by automating th ...

    STTR Phase II 2018 National Aeronautics and Space Administration
  6. Autonomous Power Controller for Mission Critical Microgrids

    SBC: P C KRAUSE AND ASSOCIATES INC            Topic: T3

    PCKA is partnering with researchers at Purdue University to develop an Autonomous Power Controller (APC) for mission-critical microgrids to supply electric power in a highly autonomous and secure manner to accomplish mission objectives. The APC consists of a centralized controller connected to an array of local component controllers. The centralized controller will be capable of optimal generation ...

    STTR Phase II 2018 National Aeronautics and Space Administration
  7. Optical Device for Sorting Particles by Size

    SBC: En'urga Inc.            Topic: NA

    This Phase II SBIR project will continue the development of an optical sorter that will be used to estimate drop sizes in sprays. The optical sorter will determine the size of drops in the 0.1 to 10 microns range. Drops in this size range are prevalent in the automobile industry, where the fuel injection pressures have increased tremendously over the past two decades. These newer injectors provide ...

    SBIR Phase II 2018 Department of CommerceNational Institute of Standards and Technology
  8. A Reconfigurable Transmitter and Receiver for Aeronautical Telemetry Applications

    SBC: INDIANA MICROELECTRONICS, LLC            Topic: A201

    This project focuses on the development of a reconfigurable microwave transmitter and receiver for telemetry applications. Both the transmitter and receiver are able to operate at any frequency between the L and C Bands. The software defined transmitter is able to change its center frequency, output bandwidth and output power as well as operate with multiple simultaneous output frequencies. The fl ...

    SBIR Phase I 2017 National Aeronautics and Space Administration
  9. Sintered Inductive Metal Printer with Laser Exposure

    SBC: TECHSHOT, INC.            Topic: H1401

    Techshot's innovative 3D metal printer offers the unique ability to fabricate metal components and tools in space which can be utilized for sustainability, maintenance and research. The proposed system will accomplish this task through the utilization of a two-stage filament melting process whereby a metallic filament is first heated to Curie temperature through induction and then deposited on a b ...

    SBIR Phase II 2017 National Aeronautics and Space Administration
  10. Software and Tools for Electronics Printing in Space(STEPS)

    SBC: TECHSHOT, INC.            Topic: H701

    We are proposing an to develop a direct write electronics and avionics printing capability within the Techshot BioFabrication Facility currently funded and anticipated to be deliver to the International Space Station in late 2018. We are calling this new system Software and Tools for Electronics Printing in Space or STEPS as it will be another step forward to truly having multimodal digital manuf ...

    SBIR Phase I 2017 National Aeronautics and Space Administration

Agency Micro-sites

SBA logo
Department of Agriculture logo
Department of Commerce logo
Department of Defense logo
Department of Education logo
Department of Energy logo
Department of Health and Human Services logo
Department of Homeland Security logo
Department of Transportation logo
Environmental Protection Agency logo
National Aeronautics and Space Administration logo
National Science Foundation logo
US Flag An Official Website of the United States Government