List

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY19 is not expected to be complete until April, 2020.

  1. A Reconfigurable Transmitter and Receiver for Aeronautical Telemetry Applications

    SBC: INDIANA MICROELECTRONICS, LLC            Topic: A201

    This project focuses on the development of a reconfigurable microwave transmitter and receiver for telemetry applications. Both the transmitter and receiver are able to operate at any frequency between the L and C Bands. The software defined transmitter is able to change its center frequency, output bandwidth and output power as well as operate with multiple simultaneous output frequencies. The fl ...

    SBIR Phase I 2017 National Aeronautics and Space Administration
  2. Sintered Inductive Metal Printer with Laser Exposure

    SBC: TECHSHOT, INC.            Topic: H1401

    Techshot's innovative 3D metal printer offers the unique ability to fabricate metal components and tools in space which can be utilized for sustainability, maintenance and research. The proposed system will accomplish this task through the utilization of a two-stage filament melting process whereby a metallic filament is first heated to Curie temperature through induction and then deposited on a b ...

    SBIR Phase II 2017 National Aeronautics and Space Administration
  3. Software and Tools for Electronics Printing in Space(STEPS)

    SBC: TECHSHOT, INC.            Topic: H701

    We are proposing an to develop a direct write electronics and avionics printing capability within the Techshot BioFabrication Facility currently funded and anticipated to be deliver to the International Space Station in late 2018. We are calling this new system Software and Tools for Electronics Printing in Space or STEPS as it will be another step forward to truly having multimodal digital manuf ...

    SBIR Phase I 2017 National Aeronautics and Space Administration
  4. Rodent Centrifuge

    SBC: TECHSHOT, INC.            Topic: H801

    According to the decadal report titled, Life and Physical Sciences Research for a New Era of Space Exploration, a Report, ??the AHB Panel would be remiss if it did not strongly recommend an animal centrifuge capable of accommodating rats/mice at variable gravity levels.? Furthermore, the panel stated, ??research on animal models will be constrained without the ability to manipulate the gravity var ...

    SBIR Phase I 2017 National Aeronautics and Space Administration
  5. Electromagnetic Characterization of Advanced Composites by Voxel-Based Inverse Methods

    SBC: VICTOR TECHNOLOGIES LLC            Topic: Z1102

    The nondestructive characterization of advanced composites, such as carbon-fiber reinforced polymers (cfrp), by electromagnetic means is well established. What is needed to advance the state of the art are sophisticated inversion algorithms that allow layup and impact damage to be determined in localized regions, which means that more traditional methods of model-based inverse methods must be rep ...

    SBIR Phase I 2017 National Aeronautics and Space Administration
  6. Composite Repair System

    SBC: GLOYER-TAYLOR LABORATORIES LLC            Topic: T1202

    GTL has developed an innovative composite repair methodology known as the Composite Repair System (CRS). In this phase I effort, CRS is being developed for the repair of damaged induced in thin-laminate composite cryotanks. In applying CRS to damaged composite structures, the required level of structural capacity is recovered to within a predetermined percentage of its original performance after ...

    STTR Phase I 2017 National Aeronautics and Space Administration
  7. Autonomous Power Controller for Mission Critical Microgrids

    SBC: P C KRAUSE AND ASSOCIATES INC            Topic: T302

    PCKA is partnering with researchers at CWRU to develop an Autonomous Power Controller (APC) for mission-critical microgrids to supply electric power in a highly autonomous and secure manner to accomplish mission objectives. The APC consists of a centralized controller connected to an array of local component controllers. The centralized controller will be capable of optimal generation and load sch ...

    STTR Phase I 2017 National Aeronautics and Space Administration
  8. Active Radiation Shield

    SBC: GLOYER-TAYLOR LABORATORIES LLC            Topic: T301

    In the Phase I effort, Gloyer-Taylor Laboratories LLC (GTL) verified the feasibility of generating power from space particle radiation.  This effort successfully demonstrated electrical power production from a particle radiation source using an initial proof-of-concept device.  The effort also identified a second approach that has the potential for even better power generation and offers ...

    STTR Phase II 2017 National Aeronautics and Space Administration
  9. Optical Device for Sorting Particles by Size

    SBC: En'urga Inc.            Topic: NA

    This Small Business Innovation Research Phase 1 project will evaluate the feasibility of an innovative optical sizer for estimating drop sizes in sprays that have very small drops. The technique is based on the NIST provisional patent (application number 62/358,264). The NIST invention sorts particles by size over the range of 10nm to 10μm. Drop sizing is achieved in these sprays using an intense ...

    SBIR Phase I 2017 Department of CommerceNational Institute of Standards and Technology

Agency Micro-sites

SBA logo
Department of Agriculture logo
Department of Commerce logo
Department of Defense logo
Department of Education logo
Department of Energy logo
Department of Health and Human Services logo
Department of Homeland Security logo
Department of Transportation logo
Environmental Protection Agency logo
National Aeronautics and Space Administration logo
National Science Foundation logo
US Flag An Official Website of the United States Government