List

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY19 is not expected to be complete until April, 2020.

  1. A Portable Vibrio Cholerae Concentrator for Sensitive Pathogen Detection in Water

    SBC: Omnivis LLC            Topic: None

    This SBIR Phase I project proposes to develop an easy to use, inexpensive, and portable bacterial concentrator to enable more sensitive cholera pathogen (Vibrio cholerae) detection. Cholera affects communities across 41 countries, including Mozambique in 2019 after Cyclone Idai and Yemen in 2017. Current methods used to detect the cholera pathogen in water involves a 3 to 5-day procedure due to th ...

    SBIR Phase I 2019 Department of CommerceNational Institute of Standards and Technology
  2. Nanomachine Device for Semiconductor Process Control Monitoring

    SBC: Xallent LLC            Topic: None

    Conventional characterization and test methods are increasingly ineffective when applied to structures less than 100 nanometers, causing challenges across R&D, process control and failure analysis. An increasing number of subtle defects become prominent drivers of failure as device size and operating margins decrease, e.g., processing anomalies in thin gate oxides, substrate problems related to do ...

    SBIR Phase I 2019 Department of CommerceNational Institute of Standards and Technology
  3. Parameter Development for the Scaled Manufacturing of Mycelium Bound Panels for Commercial Interior Products

    SBC: ECOVATIVE DESIGN LLC            Topic: 16NCER6A

    Ecovative Design uses grown mycelium structures to bind agricultural and wood byproducts into inherently nontoxic_x000D_ products containing no added urea formaldehyde or flame-retardant chemicals. This research program focuses_x000D_ on maturing mycelium technology for use in the production of large scale board products, from low density (LD) particle board to acoustic panels and thermal insulati ...

    SBIR Phase II 2018 Environmental Protection Agency
  4. An Enhanced Contact Plasma Reactor: A Competitive Remediation Technology for Per- and Perfluoroalkyl Substance (PFAS) Contaminated Water

    SBC: Dmax Plasma LLC            Topic: 17NCER1A

    Perfluoroalkyl substances (PFASs) have received considerable attention due to their toxicity, ubiquitous presence and recalcitrance. Manufacture and disposal of PFAS-containing products has resulted in PFAS contamination of numerous water supplies. Recent reports indicate the Air Force alone is expecting to spend > $2.25 billion for cleanup for PFAS-contaminated sites. Thus, there is a huge market ...

    SBIR Phase I 2018 Environmental Protection Agency
  5. Green Process for Plastic Chrome

    SBC: VERGASON TECHNOLOGY, INC.            Topic: 17NCER5B

    This green approach to manufacturing plastic with decorative chrome will eliminate health and environmental hazards from the chrome electroplating process. The US and global market for decorative chrome on plastic is 12 million m2/year and 84 million m2/year respectively, with 80% in automobile trim, 10% in appliances and 10% in sanitary fixtures. Without a viable commercial alternative, US provid ...

    SBIR Phase I 2018 Environmental Protection Agency
  6. Continuous Learning for Additive Manufacturing Processes Through Advanced Data Analytics

    SBC: Senvol LLC            Topic: NA

    Additive manufacturing (AM) is a promising manufacturing technique for end-use parts that can solve challenges for American manufacturers in many industries, e.g. aerospace, defense, automotive, energy, and healthcare. However, despite the potential that AM offers, the rate of AM adoption in industry is very slow. This is because AM suffers from low repeatability and quality consistency issues, wh ...

    SBIR Phase I 2018 Department of CommerceNational Institute of Standards and Technology
  7. Optical Device for Sorting Particles by Size

    SBC: En'urga Inc.            Topic: NA

    This Phase II SBIR project will continue the development of an optical sorter that will be used to estimate drop sizes in sprays. The optical sorter will determine the size of drops in the 0.1 to 10 microns range. Drops in this size range are prevalent in the automobile industry, where the fuel injection pressures have increased tremendously over the past two decades. These newer injectors provide ...

    SBIR Phase II 2018 Department of CommerceNational Institute of Standards and Technology
  8. High Temperature High Resolution in-situ Differential Pressure Sensor

    SBC: Innoveering, LLC            Topic: NA

    Chemical manufacturers require high accuracy/high sensitivity pressure sensors to efficiently monitor the various manufacturing systems and processes in the chemical plant, to ensure any changes proceed in a safe and reliable manner, adhering to expected standards and practices. NIST also has a need for highly accurate pressure measurements, especially determining the thermo-physical properties of ...

    SBIR Phase II 2017 Department of CommerceNational Institute of Standards and Technology
  9. Optical Device for Sorting Particles by Size

    SBC: En'urga Inc.            Topic: NA

    This Small Business Innovation Research Phase 1 project will evaluate the feasibility of an innovative optical sizer for estimating drop sizes in sprays that have very small drops. The technique is based on the NIST provisional patent (application number 62/358,264). The NIST invention sorts particles by size over the range of 10nm to 10μm. Drop sizing is achieved in these sprays using an intense ...

    SBIR Phase I 2017 Department of CommerceNational Institute of Standards and Technology
  10. Growth and Fungal Resin Generation for Manufacturing Novel, Formaldehyde-Free Wood Particleboard

    SBC: ECOVATIVE DESIGN LLC            Topic: 16NCER6A

    Engineered wood represents a $8.SB market in the United States annually. Resins instituted in the production of traditional engineered wood products (formaldehyde) have recently come under substantial scrutiny due to detrimental human heath effects. Ecovative is developing a drop-in replacement for engineered wood resins that is economically competitive and intrinsically safe. The mResin TM system ...

    SBIR Phase I 2017 Environmental Protection Agency

Agency Micro-sites

SBA logo
Department of Agriculture logo
Department of Commerce logo
Department of Defense logo
Department of Education logo
Department of Energy logo
Department of Health and Human Services logo
Department of Homeland Security logo
Department of Transportation logo
Environmental Protection Agency logo
National Aeronautics and Space Administration logo
National Science Foundation logo
US Flag An Official Website of the United States Government