You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY20 is not expected to be complete until September, 2021.

  1. The Full Integration of a Portable Bacterial Concentrator with a Pathogen Detector Device

    SBC: OMNIVIS INC            Topic: 90

    This SBIR Phase II project proposes to integrate an easy to use, inexpensive, and portable bacterial concentrator with a handheld pathogen detection system to enable ultra-low cholera pathogen (Vibrio cholerae) detection. Cholera affects communities across 41 countries, including in Yemen, where in the first 5 months of 2020 has had 110,000 suspected cases. Current methods used to detect the chole ...

    SBIR Phase II 2020 Department of CommerceNational Institute of Standards and Technology
  2. An Optical Imaging System to Characterize Mechanical Deformation at Microscopic Length Scale

    SBC: Additive Manufacturing Innovations LLC            Topic: 90

    Additive Manufacturing Innovations LLC (AM-Innov) in collaboration with Clarkson University and Naval Research Laboratory (NRL) proposes a new optical imaging system to characterize microscopic deformation of materials. The system, named as a Mechanical Testing at Microscale system (MT@micro), uses a micro-tensile testing device to mechanically load the specimen uniaxially and an optical imaging p ...

    SBIR Phase I 2020 Department of CommerceNational Institute of Standards and Technology
  3. Standardizing Grease Sampling and Characterization By Automated Online Device

    SBC: Poseidon Systems, LLC            Topic: 90

    Scheduled grease sampling is one of the more reliable methods for detecting mechanical issues within machinery. Offline laboratory‐based analysis of the grease can indicate component failures, such as spalling via high concentrations of ferrous particulates. However, consistency, costs, and frequency of sampling are less than ideal. Manually collecting grease samples can put personnel in danger ...

    SBIR Phase I 2020 Department of CommerceNational Institute of Standards and Technology
  4. Nanomachine Device for Semiconductor Process Control Monitoring

    SBC: Xallent LLC            Topic: None

    Conventional characterization and test methods are increasingly ineffective when applied to structures less than 100 nanometers, causing challenges across R&D, process control and failure analysis. An increasing number of subtle defects become prominent drivers of failure as device size and operating margins decrease, e.g., processing anomalies in thin gate oxides, substrate problems related to do ...

    SBIR Phase I 2019 Department of CommerceNational Institute of Standards and Technology
  5. A Portable Vibrio Cholerae Concentrator for Sensitive Pathogen Detection in Water

    SBC: OMNIVIS INC            Topic: None

    This SBIR Phase I project proposes to develop an easy to use, inexpensive, and portable bacterial concentrator to enable more sensitive cholera pathogen (Vibrio cholerae) detection. Cholera affects communities across 41 countries, including Mozambique in 2019 after Cyclone Idai and Yemen in 2017. Current methods used to detect the cholera pathogen in water involves a 3 to 5-day procedure due to th ...

    SBIR Phase I 2019 Department of CommerceNational Institute of Standards and Technology
  6. MARS Phase II

    SBC: ATC-NY, Inc.            Topic: DHA172004

    System maintenance is time consuming, expensive, and can cause extensive downtime if done improperly. To avoid improper system maintenance, extensive training is often required for existing systems, with additional training required for new capabilities before they can be deployed. This training often slows the deployment of new capabilities. Based on a successful SBIR Phase I prototype, the ATC-N ...

    SBIR Phase II 2019 Department of DefenseDefense Health Program
  7. Continuous Learning for Additive Manufacturing Processes Through Advanced Data Analytics

    SBC: Senvol LLC            Topic: NA

    Additive manufacturing (AM) is a promising manufacturing technique for end-use parts that can solve challenges for American manufacturers in many industries, e.g. aerospace, defense, automotive, energy, and healthcare. However, despite the potential that AM offers, the rate of AM adoption in industry is very slow. This is because AM suffers from low repeatability and quality consistency issues, wh ...

    SBIR Phase I 2018 Department of CommerceNational Institute of Standards and Technology
  8. Optical Device for Sorting Particles by Size

    SBC: En'urga Inc.            Topic: NA

    This Phase II SBIR project will continue the development of an optical sorter that will be used to estimate drop sizes in sprays. The optical sorter will determine the size of drops in the 0.1 to 10 microns range. Drops in this size range are prevalent in the automobile industry, where the fuel injection pressures have increased tremendously over the past two decades. These newer injectors provide ...

    SBIR Phase II 2018 Department of CommerceNational Institute of Standards and Technology
  9. TELTAN (TELemedicine over a TActical Network)

    SBC: ATC-NY, Inc.            Topic: DHP15002

    ATC-NY is developing TELTAN (TELemedicine over a TActical Network), an Android and Windows software application for Virtual Interactive Presence and Augmented Reality (VIPAR). VIPAR shows great potential for making remote medical expertise available in th

    SBIR Phase II 2018 Department of DefenseDefense Health Program
  10. Noninvasive Monitor of Vascular Volume Fluid Shifts

    SBC: Critical Link, LLC            Topic: DHA17007

    We are developing a physiological monitoring tool, PV[O]H, to simultaneously and continuously record hematocrit and vascular volume. The Phase I SBIR established the feasibility of producing an Army useful PV[O]H. Specific Phase II objectives are 1. Complete manufacture of 10 portable units, 2. Finalize FDA discussions to develop the device as a Medical Device Development Tool (MDDT), 3. Finalize/ ...

    SBIR Phase II 2018 Department of DefenseDefense Health Program
US Flag An Official Website of the United States Government