List

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY19 is not expected to be complete until April, 2020.

  1. A Portable Vibrio Cholerae Concentrator for Sensitive Pathogen Detection in Water

    SBC: Omnivis LLC            Topic: None

    This SBIR Phase I project proposes to develop an easy to use, inexpensive, and portable bacterial concentrator to enable more sensitive cholera pathogen (Vibrio cholerae) detection. Cholera affects communities across 41 countries, including Mozambique in 2019 after Cyclone Idai and Yemen in 2017. Current methods used to detect the cholera pathogen in water involves a 3 to 5-day procedure due to th ...

    SBIR Phase I 2019 Department of CommerceNational Institute of Standards and Technology
  2. Nanomachine Device for Semiconductor Process Control Monitoring

    SBC: Xallent LLC            Topic: None

    Conventional characterization and test methods are increasingly ineffective when applied to structures less than 100 nanometers, causing challenges across R&D, process control and failure analysis. An increasing number of subtle defects become prominent drivers of failure as device size and operating margins decrease, e.g., processing anomalies in thin gate oxides, substrate problems related to do ...

    SBIR Phase I 2019 Department of CommerceNational Institute of Standards and Technology
  3. Continuous Learning for Additive Manufacturing Processes Through Advanced Data Analytics

    SBC: Senvol LLC            Topic: NA

    Additive manufacturing (AM) is a promising manufacturing technique for end-use parts that can solve challenges for American manufacturers in many industries, e.g. aerospace, defense, automotive, energy, and healthcare. However, despite the potential that AM offers, the rate of AM adoption in industry is very slow. This is because AM suffers from low repeatability and quality consistency issues, wh ...

    SBIR Phase I 2018 Department of CommerceNational Institute of Standards and Technology
  4. Optical Device for Sorting Particles by Size

    SBC: En'urga Inc.            Topic: NA

    This Phase II SBIR project will continue the development of an optical sorter that will be used to estimate drop sizes in sprays. The optical sorter will determine the size of drops in the 0.1 to 10 microns range. Drops in this size range are prevalent in the automobile industry, where the fuel injection pressures have increased tremendously over the past two decades. These newer injectors provide ...

    SBIR Phase II 2018 Department of CommerceNational Institute of Standards and Technology
  5. High Temperature High Resolution in-situ Differential Pressure Sensor

    SBC: Innoveering, LLC            Topic: NA

    Chemical manufacturers require high accuracy/high sensitivity pressure sensors to efficiently monitor the various manufacturing systems and processes in the chemical plant, to ensure any changes proceed in a safe and reliable manner, adhering to expected standards and practices. NIST also has a need for highly accurate pressure measurements, especially determining the thermo-physical properties of ...

    SBIR Phase II 2017 Department of CommerceNational Institute of Standards and Technology
  6. Optical Device for Sorting Particles by Size

    SBC: En'urga Inc.            Topic: NA

    This Small Business Innovation Research Phase 1 project will evaluate the feasibility of an innovative optical sizer for estimating drop sizes in sprays that have very small drops. The technique is based on the NIST provisional patent (application number 62/358,264). The NIST invention sorts particles by size over the range of 10nm to 10μm. Drop sizing is achieved in these sprays using an intense ...

    SBIR Phase I 2017 Department of CommerceNational Institute of Standards and Technology
  7. High Temperature High Resolution in-situ Differential Pressure Sensor

    SBC: Innoveering, LLC            Topic: 90105

    Chemical manufacturers require high accuracy and high sensitivity pressure sensors to efficiently monitor the various manufacturing systems and processes in the chemical plant, to ensure any changes proceed in a safe and reliable manner, adhering to expected standards and practices. In addition, NIST has a need for highly accurate absolute and differential pressure measurements, especially for det ...

    SBIR Phase I 2016 Department of CommerceNational Institute of Standards and Technology
  8. A Tool for Building Semantically Interoperable Specification and Standards

    SBC: XSB INC.            Topic: 9010273R

    Standards and specifications are widely used in government and industry to define requirements for products and processes and insure interoperability, safety, and quality of industrial and domestic products. Specifications and standards documents almost always cross-reference other standards and specification. Taken together, the web of interdependent standards forms an immensely important knowled ...

    SBIR Phase I 2015 Department of CommerceNational Institute of Standards and Technology
  9. VIIRS DNB HGS Radiometric Calibration Source

    SBC: INNOVATIVE IMAGING & RESEARCH CORP            Topic: 843D

    A new radiometric vicarious calibration approach for the Suomi NPP VIIRS Day/Night Band’s (DNB) high gain stage (HGS) is proposed that will complement traditional, extended source, radiance-based calibrations, which are based on natural lunar illumination and not as accurate as desired. The proposed research will produce affordable, field-deployable, NIST-traceable point source lamps that can ac ...

    SBIR Phase I 2015 Department of CommerceNational Oceanic and Atmospheric Administration
  10. GlobalSense: A New Atmospheric Observing System Featuring Innovative Airborne Probes

    SBC: MANO NANOTECHNOLOGIES INC            Topic: 861X

    The underlying framework for modern-day weather forecasting is numerical weather prediction (NWP). Even the current and planned weather observing platforms leave gaps that are insufficient to meet the requirements of NWP. Mano Nanotechnologies, Inc. proposes a new environmental sensing system, known as “GlobalSense”, which will enable transformational forecast improvements by filing these crit ...

    SBIR Phase I 2015 Department of CommerceNational Oceanic and Atmospheric Administration

Agency Micro-sites

SBA logo
Department of Agriculture logo
Department of Commerce logo
Department of Defense logo
Department of Education logo
Department of Energy logo
Department of Health and Human Services logo
Department of Homeland Security logo
Department of Transportation logo
Environmental Protection Agency logo
National Aeronautics and Space Administration logo
National Science Foundation logo
US Flag An Official Website of the United States Government