Award Data

The development of a greatly enhanced receiver for the WWVB signal is targeted, as well as possible modifications in the transmitted signal, which would both offer significant improvements in its effective coverage. This is to be achieved while allowing the replacement of the bulky, expensive, ferrite-based antenna, commonly used in the receiver, with a novel lower-cost antenna. Furthermore, the p ...

Perform a feasibility study on developing a face recognition application in a cloud computing environment utilizing MBARK as the middleware. The application will have a client piece that will run on a mobile device and a server piece that will run on a higher-performance computing cluster. The specific objectives of the feasibility can be enumerated as follows: 1. Split/distribute the MBARK middle ...

Improving the quality and intensity of the x-ray beam is an important design goal for every synchrotron installation. Although small, the effects of vacuum windows on x-ray absorption and phase contrast cannot be neglected. Synchrotron x-rays have wavelengths on the order of one Angstrom (1 x 10-10m), the same order of magnitude as inter-atomic distances. These x-rays are used to study many differ ...

N/A

In the proposed Phase I SBIR program, Aymont Technology and CoolCAD Electronics will design and demonstrate prototype silicon carbide (SiC) avalanche photodiodes (APD) specifically designed for high-efficiency, single-photon counting of 121.6 nm Lyman-alpha photons. This detector will be provided to relevant personnel at NIST for calibration and testing. Both discrete APDs and arrays will be used ...

The ability to electronically identify users and their devices is increasingly becoming an integral part of our interaction with computing platforms. Whether an operating system is contacting the manufacturer's web site to confirm its proper registration and payment today, or a cell phone is broadcasting entrance credentials to a secure physical site tomorrow, it is apparent that identifying infor ...

THE CONTRACTOR SHALL DEVELOP A FUZZY SET METHODOLOGY FOR UNCERTAINTY ANALYSIS IN PROBABILISTIC SEISMIC SAFETY ASSESSMENT OF NUCLEAR POWER PLANTS. FUZZY SET LOGIC WILL BEUSED FOR COLLECTING, QUANTIFYING AND PROPAGATING SUBJECTIVE,ENGINEERING JUDGEMENT USED IN THE UNCERTAINTY ANALYSIS. IN PHASE I, FEASIBILITY OF THE PROPOSED APPROACH WILL BE DEMONSTRATED BY APPLYING IT TO SELECTED PARTS OF A PROBABI ...

New innovative technology for the visually impaired has been developed by NIST. If commercialized, it would provide refreshable tactile graphical information to the visually impaired, enabling them to compete on a more equal footing in the workplace and the education system.

A wireless sensor and actuator network capable of providing precision time synchronization between the nodes of the network will be developed. The IEEE 1451.0 smart transducer interface and IEEE 1588 time synchronization standards will be combined, with additional software and hardware to provide synchronization between the clocks on the Wireless Transducer Interface Modules (WTIM) sensors/actuato ...

A semiconductor metrology tool will be developed employing the technique of small-angle x-ray scattering (SAXS) to measure the critical dimension (CD) of patterned device structures. The feasibility of the SAXS technique to measure CD has been shown using high-power synchrotron radiation facilities which are not of practical use to the semiconductor industry. The ultimate project goal is to produc ...