List

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for the given year is not complete until April of the following year. Annual Reports data is a snapshot of agency reported information for that year and hence might look different from the live data in the Awards Information charts.

  1. Manufacturing Data Compiler for Visualization Based on Engineering-Driven Machine Learning

    SBC: OG Technologies, Inc.            Topic: NA

    There has been substantial development in data analytics. However, the complex mathematical formulation of “big data analytics” is difficult to populate in general manufacturing plants. There is a need for an SPC-like tool to enable the acceptance of the advanced data analytics and its visualization. The MD Compiler, a tool to bridge the gap between data available and the information demanded ...

    SBIR Phase I 2018 Department of CommerceNational Institute of Standards and Technology
  2. Dual Plane 3D Compton Scattering Imager with Pixelated CZT Detectors for 1-10MeV Gamma Ray

    SBC: H3D            Topic: NA

    A dual plane Compton imager prototype system with large volume pixelated CZT detectors will be built for spectrally resolved MeV gamma ray tomographic applications. These two planes will be operated at independent clocks and they will be synchronized via a common periodical pulse. The common periodical pulse is self-generated so it does not rely on external pulse generator. Each detector will be c ...

    SBIR Phase I 2018 Department of CommerceNational Institute of Standards and Technology
  3. Offshore Wind Energy Resource Siting

    SBC: SEALANDAIRE TECHNOLOGIES, INC.            Topic: 911SG

    Over the last decade, it has been noted that offshore wind energy resource development could prove extensively valuable in many areas of our nation’s growth, including continued diversification of our energy supply, more options for cost-competitive electricity in coastal and Great Lakes regions, and economical stimulation through new and lasting infrastructure development. The challenges associ ...

    SBIR Phase I 2013 Department of CommerceNational Oceanic and Atmospheric Administration
  4. Production Methods and Software for NIST Calibration Phantoms

    SBC: SIGMA K CORP            Topic: N/A

    Magnetic Resonance Imaging data needs to be calibrated using a universal standard. NIST and the ISMRM SQRM committee have developed the NIST/NIST MR phantom. The group had two phantoms manufactured to their specifications and these phantoms have been imaged at numerous imaging facilities. Sigma-K now proposes to develop a complete manufacturing method that will produce 50 MRI phantoms. These phant ...

    SBIR Phase II 2012 Department of CommerceNational Institute of Standards and Technology
  5. An Integrated Decision Support Framework for Sustainability CAE

    SBC: BIMCON Inc.            Topic: 9050273R

    The objective of this proposal is to establish the feasibility of developing an integrated decision support framework that transforms the current time-consuming and reactive (post completion of final design) sustainability assessment into a proactive CAE approach that enables the ability to revise designs based on performance against selected sustainability targets in the product design process, i ...

    SBIR Phase I 2011 Department of CommerceNational Institute of Standards and Technology
  6. Decision Support Tools for Sustainable Manufacturing

    SBC: BIMCON Inc.            Topic: 907012R

    Our vision is that of an integrated decision support solution that transforms the current time-consuming and reactive (post-design) sustainability assessment of a product into a proactive approach available in the early design phases. This solution called Sustainability Integrated into Early Design (SIED) will deliver lifecycle sustainability data into early design processes and focus primarily on ...

    SBIR Phase II 2011 Department of CommerceNational Institute of Standards and Technology
  7. Decision Support Tools for Sustainable Manufacturing

    SBC: BIMCON Inc.            Topic: N/A

    The objective of this proposal is to establish the feasibility of developing an integrated decision support tool that transforms the current time-consuming and reactive (post-design) sustainability assessment into a real-time, proactive approach available in the early phases of product design. This tool, called Sustainability Integrated into Early Design (SIED), will define and capture lifecycle-w ...

    SBIR Phase I 2010 Department of CommerceNational Institute of Standards and Technology
  8. Detecting Intrusion from Network Anomalies (DINA)

    SBC: Michigan Aerospace Corporation            Topic: N/A

    This proposal introduces the Detecting Intrusion from Network Anomalies (DINA) system, which uses data mining tools to automatically detect anomalous behaviors that can be related to undesired intrusion and/or attacks upon computer networks, as well as other use patterns which may indicate behaviors which are non-hostile but still problematic. The application will make use of Ensembles of Decision ...

    SBIR Phase I 2008 Department of CommerceNational Institute of Standards and Technology
  9. Low-Loss, FemtoEtch, in-Fiber Fabry-Perot 860-nm Optical Filter

    SBC: TRANSLUME, INC.            Topic: N/A

    Most commercial filters have significant loss even in the passband of the filter. This problem is further exacerbated when the filter must be integrated or inserted within an optical fiber. Translume has developed over the last few years means and expertise to micromachine single-mode fiber using a combination of femtosecond laser pulses and highly anisotropic hydrofluoric acid etching. We propose ...

    SBIR Phase I 2008 Department of CommerceNational Institute of Standards and Technology
  10. Micro-Scale Quadrupole Mass Spectrometer

    SBC: Aerophysics, Inc.            Topic: N/A

    The proposed research comprises design, analysis, and ultimate fabrication and operation of a microfabricated array of quadrupole mass spectrometers (QMS). The design capitalizes on recent advances in micro-electro-mechanical systems (MEMS) and molecular-beam-epitaxy (MBE) technology so that the device can be mass-produced on a chip. In addition to analyzing a single element QMS in Phase 1, invest ...

    SBIR Phase I 2003 Department of CommerceNational Institute of Standards and Technology

Agency Micro-sites

SBA logo
Department of Agriculture logo
Department of Commerce logo
Department of Defense logo
Department of Education logo
Department of Energy logo
Department of Health and Human Services logo
Department of Homeland Security logo
Department of Transportation logo
Environmental Protection Agency logo
National Aeronautics and Space Administration logo
National Science Foundation logo
US Flag An Official Website of the United States Government